Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
26 Sept 2023, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Foundry & Forge Division Bangalore
HINDUSTAN AERONAUTICS LIMITED Foundry & Forge Division Bangalore
ALUMINIUM BAR AA 2014 DIA 420 MM
2772
F/DGM/IMM/RR/R/521/2
IMM
Unknown (Unspecified Location)
26 Sept 2023
14 Sept 2023
14 Sept 2023
26 Sept 2023
Please fill only in the cells colored blue ANNEXURE-II
FOUNDRY AND FORGE DIVISION HINDUSTAN AERONAUTICS LIMITED POST BAG NO. 1791, BENGALURU - 560017. INDIA.
Techno-Commercial Bid
Tender Ref. No: F/DGM/IMM/RR/R/521/2
NAME OF WORK: RAW MATERIAL
Name of the Vendor/Firm : Quotation Reference :
TECHNICAL COMPLIANCE MATRIX :
Vendor must compulsorily fill "YES" or "NO" field of this Technical Compliance Matrix. In case, any of the "YES" or "NO" field against any rows is not filled by the vendor, then such offer will be treated as incomplete and not meeting to our technical requirements. All the required and necessary technical information must be revealed on this sheet alone, and the quotation at the time of Bid opening must contain the full and complete technical details as required by the RFQ. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If any vendor attaches his own additional documents, and there is any mismatch or conflict or ambiguity in that documents w.r.t. the information provided in this Compliance Matrix, then the information mentioned in this Compliance Matrix will be treated as final for further evaluation. Therefore, vendor must fill this sheet completely, and carefully. Please note that no technical clarifications by the successful bidder will be entertained after order placement. So, all the required / necessary technical informations must be furnised now through this Compliance Matrix.
Sl# Requirements Whether complied ? Supplier's Comments
I Material : ALUMINIUM BAR AA 2014 - IN D C CAST CONDTION.
Size (Dia) : Ø 420 mm
specification : AA 2014 - IN D C CAST CONDTION.
Quantity & Tolerance : 5 ,TON Tolerance : +/-10%
1 Bar lengths : Bar lengths shall be supplied in 2 to 4 meter
2 Mill Test certificate : Mill Test certificate, CoC to be provided by along with the supplies.
3 Material specification : Material specification and melt number to be punched on all the bars on both ends corners by using 6mm letters.
4 Test Certificate/Test Report /CoC : Test Certificate/Test Report /CoC provided by the supplier shall be verified and validated by our Inspection department wherever required by us.
5 Quotation / Invoices /Test : Supplier should indicate the Issue number of the material in their Quotation / Invoices /Test Certificates.
6 Tolerance of diameter : ± 3 % of the respective diameter. Tolerance 10%
7 The raw materials technical : The raw materials technical delivery/supply conditions are as per VSSC - MMPS-2201 B/S (DC-2011 for Al. Alloy AA2014 DC CAST at annexure: "A" (enclosed & supplies should conform to these requirements in technical bid),other wise offer will be rejected.
8 Indian Mills : Material should be offered from Indian Mills (Domestic Manufacturer) only. Mill name shall be specified in the quotation.
9 HAL reserves the rights : HAL reserves the rights to accept or decline any deviation on preferred number of melts & dimensional tolerances.
10 Technical & Commercial Suppliers have to submit their technical & commercial bids separately (02 bid system). Only technically accepted bids are eligible for opening of their respective commercial bid
11 Remarks (If any)
MoQ Conditions:
1 The criteria of commercial evaluation will be as follows: Case - I : If MoQ is accepted by HAL: Evaluation will be based on Unit Price basis. Case - II : If MoQ is not accepted by HAL: (i) If MoQ is less than or equal to 20% of the RFQ quantity: Evaluation will be based on Unit Price basis. (ii) If MoQ is more than 20% of the RFQ quantity: Evaluation will be based on Landed cost basis. Note: HAL reserves the right to accept or reject MOQ.
PRICE TERMS : Quoted Currency:
Sl. No. DESCRIPTION UOM QTY. DELIVERY SCHEDULE QTY OFFERED UOM Offered Tolerance on qty (%) DELIVERY OFFERED Basic Unit Price in Figures Basic Unit Price in Words Total Price
1 ALUMINIUM BAR AA 2014 - IN D C CAST CONDTION. SIZE (Dia) : Ø 420 mm QUANTITY TOLERANCE : +/- 10% TON 5 2023-12-30T00:00:00Z
TERMS & CONDITIONS :
Vendor Bank details :
Quoted Currency:
Validity of Quotation: (120 Days)
Delivery Terms: (DAP/FOR, HAL, Bangalore)
Delivery Schedule / Lead Time:
Please Specify whether LD Clause Agreed / Not Agreed: (Please Refer Sl # L of Annexure - I Condition of tender.)
Payment Terms (within 30 days):
Applicable Taxes (if any) e.g. GST etc.
OTHER TERMS AND CONDITIONS: (If any)
Note : It is mandatory to fill techno-commercial compliance matrix and submit signed stamped copy of same.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
47263_TenderPDF1_RR-R-521-2-RFQ_1694670158.pdf
TENDER_DOCUMENT • 1.42 MB
47263_TenderPDF2_RR-R-521-1-ANNEXURE-II_1694670160.xls
BOQ_DOCUMENT • 0.05 MB
47263_TenderPDF3_TWO BID Request_1694670162.docx
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .