CWE/P-52/2019-20 SPECIAL REPAIR TO BLDG NO. P- 61 (OTM ACCN) FOR SINGLE ORS UNDER GE (WEST) PATHANKOT

Amount

Demolition of cement concrete (un reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M & L 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor laid in panels using glass mdividing strips and finishing surface even and smooth without using extra cement,complete all as specified and as directed. Note: Glass dividing strips shall be measured and paid separetely.

Supply only glass dividing strip 3mm thick 38mm width,inserted in flooring, complete all as specified.

M & L 75mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

M & L for 20 -25mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing complete, all as specified and directed.

M & L for machine cut kota stone slab 20-25mm thick thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10mm thick rendering in cement mortar 1:4 complete all as specified.

M & L marble Tiles (makrana white) 30cm x 30cm x 20mm Thick machine cut,bedded jointed and pointed With grey cement slurry including cutting and polishing and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) complete, all as specified and directed.

M&L 25mm thick Granite black colour (of any type) work (table rubbed and polished) as in , cooking platforms and like in cement mortar 1:4 over cement rendering 20mm thick in cement mortar 1:4 including pointing in white cement (1:2) unsing marble dust with admisture of pigment to match with shade of granite, cutting hole/ opening for wash hand basin including moulding edges complete all as specified & directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L Joint free coloured non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified.

M & L Joint free coloured glazed ceramic tiles (first quality) of size 300 x 450 x 7mm thick on vertical surfaces such as dado with highlighter etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,over and including 10 mm thick rough cement plaster to recieve tiles in cement mortar 1:4 , complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius in half brick work built in cement mortar 1:4, complete all as specified.

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M & L for precasted RCC 1:2:4 type B-1 using 20mm grade crushed stone agregate manhole cover slabs of size as per site requirement or as directed by Engr-in-Charge in circular/square/rectangular size as per site requirement and placing on manhole/soakage well/septic tank complete all as specified and directed.

M & L TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4.0 sqm each and removing from site complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each and removing from site complete all as specified.

Taking down shutters of any description exceeding 1sqm and not exceeding 2 sqm each and refixing in the same opening after carrying out necessary repairs, complete all as specified and directed.

S & F Steel window/Ventilator factory made out of box type for double shutter i.e glazed & gauged shutter with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including grills 10 mm square bar, peg stay etc. , glazing (glass pane, plain 3mm thick) , guaging (GI wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.40mm) and two coats synthetic enamel paint over a coat of red oxide primer, tarred hold fast fixed in wall in PCC 1:2:4 type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and directed by Engr-in-Charge.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 165 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

S & F flush shutters, solid core construction, with block board core and playwood face pane commercial type on both sides, thickness of shutter 40mm complete all as specified and directed.

M&L factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified.

M & L Mild steel butt hinges, medium weight, cold rolled (ISI marked),100mm long , complete all as specified.

Supply and fxing Mild steel barrel tower bolt ISI marked, stove enamelled black, with bright bolt of 200mm long, complete all as specified.

Supply and fxing Mild steel pressed handle ISI marked, oval type stove enamelled, black of size 150 mm, complete all as specified.

Supply and fxing Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, all as specified.

Supply and fxing , 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified.

M&L Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified .

Supply and fxing Aluminium anodised, barrel tower bolts of extruded section of size 125mm ISI marked and fixed, complete all as specified and directed.

M & L Aluminium alloy handles (ISI marked), cast type, anodised of size 125mm and fixed, complete all as specified and directed.

M & L butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21,100 mm size complete all as specified.

M & L 2nd class hardwood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails, exc. 13 Sqcm and n exc 25 Sqcm in sectional area, complete all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc, including cleaning for refixing or removal to store .

S & F UPVC pipes 110mm dia any length single socketed with rubber ring joint fixed to walls complete all as specified and directed.

S & F UPVC pipes 75mm dia any length single socketed with rubber ring joint fixed to walls complete all as specified and directed.

S & F 110 mm dia UPVC bends any radius complete all as specified and directed.

S & F 75mm dia UPVC bends any radius complete all as specified and directed.

S & F in repairs 110 mm bore UPVC branch piece, single (double Y) equal or un equal bore with access door, complete all as specified and directed.

S & F 110 mm dia UPVC bends any radius with access door complete all as specified and directed.

S & F in repairs 75 mm bore UPVC 'T' equal or unequal bore , complete all as specified and directed.

S & F in repairs UPVC vent cowl for 110mm dia , all as specified.

S & F in repairs UPVC floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified.

S & F in repairs UPVC multi floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

M & L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Supply and fxing in repairs, Vitreous china squatting pan (Orissa pattern) size 580 x 450 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe of 32mm dia and syphonage pipe etc, and complete, all as specified and as directed.

S&F in repair Vitreous china under counter wash basin, white, rectangular shape of size 480 x 365 x 205 mm including brackets, 32 mm brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

Supply & Fix in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints , complete all as specified.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

S & F Tubular towel rail 60cm long between flanges , 20mm dia D type Brass , Chromium plated incl necessary brackets, fixed with chromium plated screws and wooden/plastic cleats complete all as specified and directed.

Supply and fixing pillar tap long neck with 450mm long braided hose, fancy type , cast copper alloy, chromium plated with capstan head screwed down for iron pipe 15 mm bore, with or without lettered 'HOT' or 'cold' with long screwd shanks and fly nuts complete all as specified. Make : Jaguar Cat Part No CQT-23021B or technocommercially equivalent in Make as per Appendix F

S & F 15mm bore swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) including shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) , complete all as specified and directed.

Supply & Fix Urinal spreader of cast copper alloy, chromium plated for fixing with 15mm dia pipe complete all as specified and directed.

S&F bib taps 15mm bore of cast copper alloy chromium plated fancy type with capstan head, screwed down, high presure , screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed.

S&F in repair 15mm bore Stop valve/angle valve cast copper alloy , fancy type , screwed down high pressure withcapstan head, screwed both ends for iron pipes or for union, fixed, complete all as specified.

S&F Stop valves/angle cock , cast copper alloy fancy type (ISI marked), chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore, as in repair complete all as specified and directed.

M&L three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified.

M&L two coats of white wash including preparation of old treated surfaces of ceiling complete all as specified.

M&L three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

M&L complete removal of existing treatment of walls and applying three coats of white wash complete all as specified.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper over and including two coats of smooth wall care putty finish complete as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over and including two coats of smooth wall care putty finish complete as specified and directed.

M&L for preparation of new plastered external surfaces of walls and applying two coats cement base paint of approved brand over a coat of alkali resistant primer all as specified and as directed .

M & L for complete removal/scrapping of existing treatment and applying two coat of cement base paint of approved brand over a coat of alkali resistant primer all as specified and as directed .

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

M&L for one coat of synthetic enamel paint on old treated wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Dismantling water tank exc 1000 but n.exc. 2000 Ltr capacity from roof slab complete all as specified

Supply and fxing rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 2000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug complete all as specified and directed.

M & L Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipeand fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) bore dia of pipe 20 mm complete all as specified and directed.

S & F 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

M & L cuting down plants/trees n exc 15 cm from roof tops/ side of external walls of buildings, chajjas, junctions of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surface and making good the disturbed portion of wall / roof with cement concrete 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate) or cement mortar 1:2 with necessary scaffolding/ staging upto 4 m height from GL , complete all as specified.

M & L PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in exposed surface of beam, parapets, facia, coping, bands and roof kerb or mud stops,rounded or chamfered angles and edges including necessary form work complete all as specified and directed.

M & L for providing water proofing treatment with APP based polymeric membrane minimum weight 3.5 Kg/sqm and minimum thickness 3mm, reinforced with polyester non woven fabric (weight not less than 150gm/sqm) applied over one coat of oil based bitumen emulsion primer @ 0.5 liter/sqm(or as per the manufacturer instructions) including cleaning of surface throughly from dust, dirt and dismantling of old membrane any type and providing 15mm thick rendering in CM 1:4 with WPC (as per manufacturer instructions) followed by new membrane with torch application with 10 cm overlaps on sides and end joints. A coat of blown bitumen 85/25 @ 1.2 kg/sqm to be applied on top of memberane, finally painting the surface with bituminous aluminium paint @ 100gm/sqm.(Note:- WPC will be measured and paid separately) complete all as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope 1:40 and thickness 25mm and finished the surfaces even and fair wihtout unsing extra cement complete all as specified and directed.

Supply only Integral water proofing compound , complete all as specified.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 92.00 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 92.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 4sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Point wiring for 15 Amp socket point controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Switch piano flush type 5 Amp single pole one way, (ISI marked), complete all as specified.

M&L Socket outlet 2 in 1, 5 Amp flush type all as specified & directed.

M&L Switch piano flush type 15 Amp single pole one way, (ISI marked), complete all as specified.

M&L socket outlet 2 in 1, 6 pin, 5 & 15 Amp multipurpose flush type,complete all as specifed.

M&L Lamp holder Polycarbonate type with back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

S&F LED Lamp 230 volts,50 Hz inverter LED 09 watt ,lumen 700 lm, rated current 35MA, CRI less than 80, Charging time 8 to 10 Hours, operating temperature -10 to 50°C, backup time 04 Hours, complete all as specififed and direccted.

M&L Ceiling rose, 3 terminal of bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

M&L Stepped type electronic fan regulator 0 to 4/5 step , flush type, heavy duty with hum free snubber circuit complete all as specified.

Supply & Fix Ceiling fan AC single phase 230/240 volts of size 1200 mm sweep complete (BLDC) type BEE 5 star rated including blade ,down rod etc including connecting to ceiling rose all as required or directed including dismantling old unsv fan and depositing to MES store yard . Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing, charging time 10-12 hours and back up time 04 hours, IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. Notes: (i) LM79 report from third party (instead of company in house lab) NABL/UL accredited lab (ii) LM 80 report from LED manufacturer (iii) Test certificates to be submitted before commencement of work/ claiming for payment . (iv) Warranty certificate for minimum 2 years to be submitted from OEM.

S&F in replacement existing UNSV sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose usning PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as directed by Engr-in-chagre

M& L for providing /cutting the round/square hole of required size in wall and finishing the same disturbed surface to match the existing finishes and including supply & fixing ventilation fan AC sinlge phase 230/240 volts of size 300 mm sweep, 900 RPM complete including grouting the ragged bolts in wall and including PVC insulated 1.5 sqmm copeer cable connecting to ceiling rose all as required or directed and writing MES no with black synthetic enamel paint 2 cm high Make : Havells Model Turbo power (1PH) or technocommercially equivalent in Make as per Appendix F

S&F Geyser 50 Ltrs capacity, 230 volts, vertical type with 5 stars rating suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element, rust proof ABS body etc incl necessay drilling, provn of anchor bolts of suitable size and including PVC connections for inlet and outlet and making electrical connections complete all as directed by Engr-in-charge.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 240V, 20Amp complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified, CPVC pipe outer diameter 16 mm with all fittings complete all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 900mm for hot and cold water connections of geyser as in repairs complete all as specified and directed

S&F 15mm bore Stop valve/angle valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed, complete all as specified.

S & F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in replacement sheet metal enclosure factory made (Double door) type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete, single pole and neutral, 240 volts, 50 Hz, 12 way with 200Amps rated copper bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

M&L MCB SP 6 to 40 Amp, 240V with 10KA breaking capacity of 'C' series 10 KA, including providing thimbles to outgoing cable all as specified and directed.

S&F MCB single pole & neutral 6 to 40 Amps, 240 Volts 'C' series, 10 KA, including providing thimbles to outgoing cable complete all as specified.

Supply and laying in replacement of existing unserviceable/ burnt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: (i) Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit. (ii) Proper colour coding is to be followed as per IS Specification. (iii) Test certificates of cables to be submitted before commencement of work/ claiming for payment. (iv) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement. (v) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame, necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

Supply and fix bldg security light fittings with LED security light fittings 25 watt, IP 65 having pressure die cast aluminium alloy housing, prismatic polycarbonate cover complete including making connection with 3 core copper flexible cable of suitable size including galvanised iron pipe bracket 1.5 metre long of 32 mm dia with clamps etc and fixing with bldg for fixing of street light fitting all as directed. Notes :- (i) Contractor shall produce LM79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee/ warranty of complete fitting/ fixture for minimum 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of the material at no extra cost. (iv) Contractor shall arrange complete material at site for approval of GE before incorporation in the work. (v) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt.

S & F in replacement existing unsv distribution board iron clad, double door with IP-54 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with including one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 25 KA and incoming 12 Nos MCB SP 40 Amps , C series & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

Abrol construction co

OMKAR SHARMA AND CO

GANDOTRA CONSTRUCTION CO

VIKRAM SINGH MANHAS

M/S RUDRA CONSTRUCTION CO