REPAIR MAINT OF GI DI CI WATER SUPPLY DISTRIBUTION PIPELINES VALVES PUMPS MOTORS AND ALLIED WORKS AT MD ACCN COMPLEXES AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

M&L for excavation in trenches n. exc. 1.5 M wide and n. exc. 1.5M in depth and getting out in soft/loose soil for laying of GI/DI/CI pipe complete all as specified and directed.

M&L for returning, filling in including spreading,levelling watering and well ramming in layers not excluding 25 cms in soft/loose soil complete all as specified and directed.

M&L for removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for PCC 1:3:6 type C1 with 20mm graded stone aggregate as in foundation for making good road surface where as road crossing of pipe lines , hardstandings etc complete all as specified and directed.

M&L for taking down GI water tubing and connections from walls/ceiling/from trenches for cleaning of any blockage and relaying or refixing of the same tubing in trenches/ wall/ceilings of size 20 mm dia bore complete all as specified and directed . Note: (i) Excavation, earth work and PCC work will be measured and paid separately under relevant items. (ii) The rate quoted must be inclusive of replacing the rusted or damaged collars/Tees/elbows/bends/unions/nipples if any.

All as per srl item no 05 above but 25 mm dia bore.

All as per srl item no 05 above but 40 mm dia bore.

All as per srl item no 05 above but 50 mm dia bore.

M&L for dismantling the existing unserviceable GI tubings and Supply, laying and connection of 15mm dia GI pipe medium grade with all fittings laid in trenches including testing complete all as specified and directed. Make : Jindal/Tata/Prakash/Surya. Note:- Excavation and earth work shall be measured and paid separately.

All as per srl item no 09 above but 20 mm dia pipe.

All as per srl item no 09 above but 25 mm dia pipe.

All as per srl item no 09 above but 40 mm dia pipe.

All as per srl item no 09 above but 50 mm dia pipe.

All as per srl item no 09 above but 80 mm dia pipe.

All as per srl item no 09 above but 100 mm dia pipe.

M&L for dismantling the existing unserviceable GI tubing complete and supply & lay new 15mm dia GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed. Make : Jindal/Tata/Prakash/Surya.

All as per srl item no 16 above but 20 mm dia pipe.

All as per srl item no 16 above but 25 mm dia pipe.

All as per srl item no 16 above but 40 mm dia pipe.

All as per srl item no 16 above but 50 mm dia pipe.

M&L for taking down CI water pipes and fittings from trenches for cleaning of any blockage and relaying or refixing of the same pipes in trenches of size 80 mm dia complete all as specified and directed . Note: (i) Excavation and earth work, CI fittings if required at site, run lead joints will be measured and paid separately under relevant items.

M&L for taking down CI/DI water pipes and fittings from trenches for cleaning of any blockage and relaying or refixing of the same pipes in trenches of size 100 mm dia complete all as specified and directed . Note: (i) Excavation and earth work, CI/DI fittings if required at site, run lead joints/push on joints will be measured and paid separately under relevant items.

M&L for taking down CI/DI water pipes and fittings from trenches for cleaning of any blockage and relaying or refixing of the same pipes in trenches of size 150 mm dia complete all as specified and directed . Note: (i) Excavation and earth work, CI/DI fittings if required at site, run lead joints/push on joints will be measured and paid separately under relevant items.

M&L for dismantling the existing unserviceable CI/DI pipes and Supply, Lay and testing Ductile iron pipes with spigot & socket ends cast special class K 7 conforming to IS 8329 with inside surface of centrifugaly cast cement mortar lined suitable for rubber joint in any length laid in trenches of 100 mm dia pipe all as specified and directed. Make : Electrosteel / Jindal / Lanco. Note:- Excavation and earth work, DI fittings, push on joint will be measured and paid separately under relevant items.

All as per srl item no 24 above but 150 mm dia pipe.

M&L for ductile iron fittings of any size, any type with all sockets or socket and spigot fittings such as bends, tappers,collars, Tee's, caps, plugs etc up to 150 mm bore complete all as specified and directed. Make : Electrosteel / Jindal / Lanco.

M&L for rubber gasket (pushon) joint of same make of DI pipe having two section of diferent hardness for DI pipe spigot & socket ends and fittings of bore dia 100 mm complete all as specified and directed.

All as per srl item no 28 above but 150 mm dia pipe.

M&L for dismantling the existing unserviceable CI pipes and Supply, Lay and testing 80 mm dia cast iron pipes with spigot and socket ends centrifugally cast, class LA, in any length, laid in trenches complete all as specified and directed. Make : Electrosteel / Jindal / Kesoram. Note:- Excavation and earth work, CI fittings, run lead joints will be measured and paid separately under relevant items.

M&L for dismantling the existing unserviceable CI pipes and Supply, Lay and testing 100 mm dia cast iron pipes with spigot and socket ends centrifugally cast, class LA, in any length, laid in trenches complete all as specified and directed. Make : Electrosteel / Jindal / Kesoram. Note:- Excavation and earth work, CI fittings, run lead joint will be measured and paid separately under relevant items.

M&L for dismantling the existing unserviceable CI pipes and Supply, Lay and testing 150 mm dia cast iron pipes with spigot and socket ends centrifugally cast, class LA, in any length, laid in trenches complete all as specified and directed. Make : Electrosteel / Jindal / Kesoram. Note:- Excavation and earth work, CI fittings, run lead joint will be measured and paid separately under relevant items.

M&L for run lead joints for spigot and socket CI pipes/ fittings including spun yarn complete for pipe of size 80 mm bore complete all as specified and directed Note :- Rate inclusive of necessary excavation,returning filling for making lead joints up to 1.5 mtr deep.

All as per srl item No 34 above but 100 mm dia pipe.

All as per srl item No 34 above but 150 mm dia pipe.

M&L for cast iron bends (any type, radius and angle) tapers any type. (Straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm bore complete all as specified and directed. Make : Electrosteel / Jindal / Kesoram.

M&L for detecting the leakage from UG DI/CI pipes up to 150 mm bore and rectifying the leakage by burning out existing lead and making joint by means of D joints, clamps, sockets etc, including cutting/threding of pipes and other allied works, excavation and earth work in any type of soil complete all as specified and directed.

M&L for detecting the leakage from under ground GI pipes up to 100 mm bore and rectifying the leakage by replacing, sockets, unions etc, including cutting/threding of pipes and other allied works, excavation and earth work in any type of soil complete all as specified and directed.

M&L for drilling and tapping Cast iron water main( in position) for branch connections of the internal dia 15 MM complete all as specified and directed.

All as per srl item no 38 above but 20mm dia pipe.

M&L for cutting CI/DI pipes in position for insertion of new Tees, branches etc of dia 80 mm complete all as specified and directed.

M&L for cutting CI/DI pipes in position for insertion of new Tees, branches etc of dia 100 mm complete all as specified and directed.

M&L for cutting CI/DI pipes in position for insertion of new Tees, branches etc of dia 150 mm complete all as specified and directed.

M&L for dismantling the existing unserviceable gate valves ,S&F gun metal globe/gate valve with inner wheel head, screwed both ends for iron pipes and fixed of 15 mm dia size complete all as specified and directed:- Make : Zoloto/Leader/Kirloskar.

All as per srl item No 45 above but 20 mm dia.

All as per srl item No 45 above but 25 mm dia.

All as per srl item No 45 above but 40 mm dia.

All as per srl item No 45 above but 50 mm dia.

M&L for demolition of existing old unserviceable brick masonary valve chamber including demolition of unserviceable M.S iron cover and iron frame and Construction of brick masonry valve pit of size 90cm x 90cm X 90 cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 type D2 ( using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thick sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/ loose soil complete all as specified and directed.

M&L for dismantling the existing unserviceable Sluice Valve complete and S&F cast iron sluice valve with flange ends and drilled bolt holes , type PN-1.6, and stainless steel spindle, non rising stem type as per IS -14846 including hand wheel, bolts, nuts and jointing materials complete of the size 80 mm complete all as specified and directed.

M&L for dismantling the existing unserviceable Sluice Valve complete and S&F cast iron sluice valve with flange ends and drilled bolt holes , type PN-1.6, and stainless steel spindle, non rising stem type as per IS -14846 including hand wheel, bolts, nuts and jointing materials complete of the size 100 mm complete all as specified and directed.

M&L for dismantling the existing unserviceable Sluice Valve complete and S&F cast iron sluice valve with flange ends and drilled bolt holes , type PN-1.6, and stainless steel spindle, non rising stem type as per IS -14846 including hand wheel, bolts, nuts and jointing materials complete of the size 150 mm complete all as specified and directed.

Supply and fix in repair 150 mm bore Non-return valve (CI Refluxe valve ) flanged joint with bypass arrangement complete with nut, bolts and washer complete all as specified and directed by Engineer-in charge.

Supply and fix in repair 100 mm bore Non-return valve (CI Refluxe valve ) flanged joint with bypass arrangement complete with nut, bolts and washer complete all as specified and directed by Engineer-in charge.

Supply and fix in repair 80 mm bore Non-return valve (CI Refluxe valve ) flanged joint with bypass arrangement complete with nut, bolts and washer complete all as specified and directed by Engineer-in charge.

M&L for cleaning of valve pit chamber of any size by taking out mud and muddy water and depositing the same to a distance n. exc 20 meter from the pit including swiping, free from any type of dirt including rectification of the leakage of valve of any size with glands of appropriate size and required packing materials complete all as specified and directed.

M&L for dismantling the existing unserviceable Foot Valve complete and S&F Cast iron Foot Valve Ball type with flange/Socket ends as per requirement ISI Marked including bolts, nuts and jointing materials complete of the size 65 mm complete all as specified and directed.

M&L for dismantling the existing unserviceable Foot Valve complete and S&F Cast iron Foot Valve Ball type with flange/Socket ends as per requirement ISI Marked including bolts, nuts and jointing materials complete of the size 80 mm complete all as specified and directed.

M&L for dismantling the existing unserviceable Foot Valve complete and S&F Cast iron Foot Valve Ball type with flange/Socket ends as per requirement ISI Marked including bolts, nuts and jointing materials complete of the size 100 mm complete all as specified and directed.

M&L for taking out sluice valves for reparing / refacing / regrinding complete all as required and refixing the same in position after necessary repairing for 80 mm bore complete all as specified and directed :-

All as per srl item No 59 above but of size 100 mm bore.

All as per srl item No 59 above but of size 150 mm bore.

M&L for dismantling the existing unserviceable MS pipes and Supply and lowering coloum Pipe 100 mm dia (bore) MS heavy grade with both ends screwed and fixed with flanges and holed drilled, groves cut for cables flanges 10mm thick, welded to pipe MS flats 20mm x 6mm thick 150mm long to flange and pipe (3 Nos) in each flanged side, joints should be with nut bolts and 2 Nos of rubber gaskets.Each coloum pipe 3 mtrs long and ISI marked etc all complete all as specified and directed.

All as per srl item No 62 above but of size 80 mm bore.

M&L for chemical analysis and testing of water sample through registered lab including collection of water at source as specified and directed and submitting test report to the department in every three month at Jalipa Military station.

M&L for bactriological test of water sample through registered lab including collection of water at sources installed at Jalipa Mil station as specified and directed and submitting test report to the department every three month at Jalipa Military station.

S&F in replacement of old unserviceable single Phase Preventer VSP3 type suitable for motor protection and making all incoming and out going electric connections complete all a specified and directed. Make : Minilec/Jepro/Gelco.

M&L for in replacement of PVC insulated and PVC sheathed 3 core 6.00 sqmm 1100 V, industrial flat, copper conductor, heavy duty, cable suitable for submersible pump motor complete all as specified and directed .

M&L for in replacement of PVC insulated and PVC sheathed 3 core 10.00 sqmm 1100 V, industrial flat, copper conductor, heavy duty, cable suitable for submersible pump motor complete all as specified and directed .

Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 20 - 32 Amp Auxiliary Contacts : NO/NC-1No. suitable for 20 HP complete all as specified and directed . Make :C&S or techno commercially equivalent.

Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 40-80 Amp Auxiliary Contacts :NO/NC-1No. suitable for 30 to 40 HP complete all as specified and directed . Make :C&S or techno commercially equivalent.

Supply only for replacement of Power Contactors 415V AC (3/4 Pole) 40-80 Amp Auxiliary Contacts :NO/NC-1No. suitable for 30 to 60 HP complete all as specified and directed . Make :C&S or techno commercially equivalent.

Devi Engineeing (BID ID -3076605)

GITANSH ENGINEERS AND COMPANY (BID ID -3081644)

M/S Tanisha Traders (BID ID -3081992)