Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.7 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹43.7 L+₹4.0 L (10.1%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹44.1 L+₹4.5 L (11.2%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹44.4 L+₹4.8 L (12.0%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹51.6 L+₹11.9 L (30.1%)Rejected-Finance | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
IMPROVEMENT / UPGRADATION OF JOINERY, CUPBOARDS, KITCHEN CABINET AND ALLIED ITEMS IN ZONE A AT SUNJUWAN UNDER GE JAMMU
2023_MES_598700_1
GEJC-16/2023-24
Open Tender
Civil Works
Item Rate
210 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
31 Jul 2023
26 May 2023
23 Jun 2023
26 May 2023
21 Jun 2023
9 Jun 2023
Amount
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and as directed.
Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Supply and fixing pressed steel frames (factory made) made out of 1.25 mm thick black mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete size of frame 105 x 60mm including bottom of each chowkhat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.
Supply and fixing pressed steel frames (factory made) made out of 1.25 mm thick black mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete size of frame 125 x 60mm including bottom of each chowkhat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.
Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkhats bed block for holdfast and the like complete all as specified and as directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.
Material and labour for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and as directed.
Supply and fixing 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned complete all as specified and directed.
Supply and fixing 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and as directed.
Supply and fixing flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing in repairs box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) 10 mm Square Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.
Supply and fixing rolled formed GI box type powder coated steel windows / Ventilator (factory made) outer frame made out of tube section 98 x 50 mm and shutter of tube section 46 x 46mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges aluminium handle 100 mm long aluminium tower bolt 02 no's on each shutter, peg stay and its locking arrangement suitable for fixing cooler / AC window complete all as specified and as directed. Notes:- The quoted rates shall also include: - (i) EPDM Gasket. (ii) 10 mm Square Bar grill / guard bar.
Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.
Supply and fixing in repairs galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.
Hacking out of old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and directed.
Supply and fixing 3mm thick sheet glass, ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Description all as per Ser item No.18.00 here-in-before but figured glass, pin head type complete all as specified and as directed.
Material and labour for pressed steel frames for cupboard chowkhat of size 60 x 40mm with one or more rebates including necessary fixing lugs, hold fasts etc complete all as specified and as directed.
Supply and fixing 75 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and as directed.
Supply and fixing in repair 18 / 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
Supply and fixing 100 mm hasp and staple safety type aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fixing stainless steel handle 100mm fixed to cupboard complete all as specified and as directed.
Supply and fixing 30mm wide flap (when open) stainless steel continuous (piano) hinges, bright finish or electrogalvanised fixed to Kitchen cupboard complete all as specified and directed.
Supply and fixing modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified and as directed. Make: - Hettich / Kaff / Sleek.
Supply and fixing 40 mm dia cupboard knobs fixed with nuts and washer brass polished bright finished complete all as specified and directed.
Supply and fixing magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed.
Material and labour for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Re-securing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongery for shutter exceeding 1.0 Sqm but not exceeding 2 Sqm each (iron mongery if used shall be paid under relevant item) and refixing in the same opening complete all as specified and as directed.
Taking down aluminium door shutter of any description, taking out double action floor spring machine, hydraulically regulated, cleaning, oiling, easying and adjusting to make fully functional and refixed in the position including refixing shutter complete all as specified and as directed. Note: - Store required if any shall be paid separately in relevant items.
Taking down rolling shutter of any description and size, replace the old tension spring, worn out hood cover, replacement of worn out curtain steel lathe etc and other unserviceable parts and refix the shutter in position after repair and make the shutter fully functional after oiling and greasing complete all as specified and as directed.
Supply and fixing aluminium door frame powder coated for door, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.
Supply and fixing in repair powder coated aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 no's 150mm size in each door, anodised aluminum snap beading screws, 3 no's aluminium hinges 150mm size B-21 type, 200mm long aluminium tower bolt, one number mortice lock 100mm size 2 lever (vertival type), 01 no door closer hydraulically regulated (die cast body), designation No. 3, universal type, suitable for door shutters etc complete all as specified and as directed.
Supply and fixing in repair powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
Supply and fixing in repair powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
Supply and fixing powder coated aluminium anodised grill size of mesh 75 x 75 x 6mm fixed to window using U/Y channel of size 25 x 12mm and fixed with screws on aluminium section complete all as specified and as directed.
Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane and fixed to ventilator complete all as specified and as directed.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.
Supply and fixing in repairs double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and including taking down aluminium door shutter and refixing complete all as specified and as directed.
Supply and fixing powder coated aluminium three track sliding type glazed window, shutter with 5mm thick plain sheet glass fixed open track section 100 x 38mm having three tracks (two of glass and one of stainless steel wire cloth) with members of window shutters of section 38 x 12mm including aluminium grill 75 mm pitch diamond shape, wire gauge and grill shall be fixed with the help of 40 mm aluminium flat and other standard bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips, rubber packing, aluminium snap beading etc complete all as specified and as directed.
Taking down cement plaster of any descrption on brick or stone wall or from concrete surface including taking out joint, hacking for key, scrubbing down with water etc and removing unserviceable material outside the cantt complete all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over 1 mm thick putty complete all as specitied and as directed.
Material and labour for preparation of surface and applying two coats of cement based paint over one coat of primer on new plastered surface complete all as specified and directed.
Supply and fixing extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and directed.
Supply and fixing extruded aluminium alloy handles fabricated type anodised 125 mm long complete all as specified and directed.
Supply and fixing in repair extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and directed.
Supply and fixing in repair extruded aluminium alloy handles fabricated type anodised 125 mm long complete all as specified and directed.
Supply and fixing 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fixing 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fixing in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fixing 300 mm long dia aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
Supply and fixing in repair 300 mm long dia aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.
Supply and fixing in repair mild steel helical door spring of size 300 mm at site including welding to steel chowkhats complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S VED PAUL MAHAJAN
M/S Sukhmani Construction Co.
M/S ELECTROMATICS
M/S TRIKUTA BUILDERS
Bidder Name
M/S VED PAUL MAHAJAN
M/S TRIKUTA BUILDERS
M/S Sukhmani Construction Co.
M/S MANJIT SINGH AND SONS
M/S ELECTROMATICS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .