Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹51.4 CrAccepted-AOC A 1 SHASTRI NAGAR DALLE KHAN CHAWKI CHAURHA NEW PAL ROAD JODHPUR | JODHPUR | JODHPUR | RAJASTHAN | L-1 | Accepted-AOC Awarded | |
| 2 | L-2₹53.9 Cr+₹2.5 Cr (4.94%)Rejected-Finance | L-2 | Rejected-Finance Rejected | |
| 3 | L-3₹53.3 Cr+₹1.9 Cr (3.73%)Rejected-Finance | L-3 | Rejected-Finance Rejected | |
| 4 | L-4₹57.4 Cr+₹6.0 Cr (11.6%)Rejected-Finance | L-4 | Rejected-Finance Rejected | |
| 5 | L-5₹59.0 Cr+₹7.6 Cr (14.9%)Rejected-Finance MD22 ELDECO MENSIONZ SOHNA ROAD NEAR FAZILPUR CHOCK GURGAON FF 19 OMAXE GURGAON MALL SOHNA ROAD GURUGRAM 2021R5777 | GURUGRAM | GURUGRAM | HARYANA | L-5 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | TIRUPATI CEMENT PRODUCTS L3 | Bansal Construction Co, Gurgaon L5 | M/S SHREE BALAJI BUILDERS L6 | M/s K. R. ANAND L7 | Jainco Buildcon Private Limited L2 | S.B.E. ENGINEERING AND INFRASTUCTURE PRIVATE LIMITED L1 | SHREE HARI INFRAPROJECTS PRIVATE LIMITED L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing of M.S specials as per relevent IS code with latest revision IS marked complete in all respect as per direction of Engineer-in-charge. | 40,000 | Kg. | 82.9 ₹33,16,000 Lowest | 85 ₹34,00,000 | 87 ₹34,80,000 | 150 ₹60,00,000 | 101.91 ₹40,76,400 | 125 ₹50,00,000 | 100 ₹40,00,000 |
| 2.00 | Supply, installing, testing and commissioning of 1600 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge | 3 | Nos. | 21,70,000 ₹65,10,000 Lowest | 26,00,000 ₹78,00,000 | 23,04,750 ₹69,14,250 | 34,90,000 ₹1,04,70,000 | 21,77,842.04 ₹65,33,526.12 | 23,00,000 ₹69,00,000 | 21,72,000 ₹65,16,000 |
| 3.00 | Supply, installing, testing and commissioning of 300 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar | 8 | Nos. | 70,000 ₹5,60,000 | 52,000 ₹4,16,000 Lowest | 75,600 ₹6,04,800 | 1,20,000 ₹9,60,000 | 79,042.29 ₹6,32,338.32 | 1,10,000 ₹8,80,000 | 72,000 ₹5,76,000 |
| 4.00 | Providing of 250 micron to 1.5 mm polythene sheet of minimum 1000 gauge @228 gm/sqm minimum weight | 3,128 | Kg. | 125 ₹3,91,000 Lowest | 137.5 ₹4,30,100 | 143 ₹4,47,304 | 307 ₹9,60,296 | 127.39 ₹3,98,475.92 | 150 ₹4,69,200 | 230 ₹7,19,440 |
| 5.00 | Providing and fixing of Extra heavy duty FRP manhole cover with frame of size 840x990 mm of 10 Ton load bearing capacity | 8 | Nos. | 24,000 ₹1,92,000 | 24,500 ₹1,96,000 | 25,735 ₹2,05,880 | 4,000 ₹32,000 | 1,656.05 ₹13,248.4 Lowest | 35,000 ₹2,80,000 | 29,000 ₹2,32,000 |
| 6.00 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1800 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 3,290 | Metre | 56,000 ₹18,42,40,000 Lowest | 63,000 ₹20,72,70,000 | 64,155 ₹21,10,69,950 | 77,000 ₹25,33,30,000 | 61,962.99 ₹20,38,58,237.1 | 58,500 ₹19,24,65,000 | 61,000 ₹20,06,90,000 |
| 7.00 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1600 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 3,323 | Metre | 51,615 ₹17,15,16,645 | 56,700 ₹18,84,14,100 | 57,435 ₹19,08,56,505 | 70,000 ₹23,26,10,000 | 53,949.36 ₹17,92,73,723.28 | 50,000 ₹16,61,50,000 Lowest | 55,000 ₹18,27,65,000 |
| 8.00 | Laying 2000 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 225 | Metre | 55,000 ₹1,23,75,000 | 70,000 ₹1,57,50,000 | 62,375 ₹1,40,34,375 | 70,000 ₹1,57,50,000 | 25,477.71 ₹57,32,484.75 Lowest | 1,60,000 ₹3,60,00,000 | 89,000 ₹2,00,25,000 |
| 9.00 | Laying 1500 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 180 | Metre | 38,500 ₹69,30,000 | 48,000 ₹86,40,000 | 40,950 ₹73,71,000 | 60,000 ₹1,08,00,000 | 15,286.62 ₹27,51,591.6 Lowest | 1,30,000 ₹2,34,00,000 | 71,000 ₹1,27,80,000 |
| 10.00 | Supply, installing, testing and commissioning of 1800 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge | 1 | Nos. | 32,50,000 ₹32,50,000 | 32,96,510 ₹32,96,510 | 31,46,700 ₹31,46,700 | 35,00,000 ₹35,00,000 | 30,42,828.03 ₹30,42,828.03 | 30,00,000 ₹30,00,000 | 29,00,000 ₹29,00,000 Lowest |
Tender Value
₹57.4 Cr
EMD Value
₹1.1 Cr
Closing Date
10 Nov 2025, 5:00 pmClosed
ABHINAV VERMA
Division - Water Supply
Replacement of Pipeline Boosting station to cater
2025_HRY_478768_1
20252E678126 DE37 4797 90D8 465DC5CC9A6E717001
Open Tender
Civil Works
Works
365 days
Gurugram
Replacement of Pipeline Boosting station to cater
2 documents required · 2 mandatory
₹1,180
₹1.1 Cr
Yes
6th Floor Plot No. 3 Sector 44 Gurugram
11 May 2026
17 Oct 2025
11 Nov 2025
17 Oct 2025
10 Nov 2025
17 Oct 2025
24 Oct 2025
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of M.S specials as per relevent IS code with latest revision IS marked complete in all respect as per direction of Engineer-in-charge. | 40,000 | Kg. | 100 | ₹40,00,000 |
| - | Supply, installing, testing and commissioning of 1600 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge | 3 | Nos. | 100 | ₹300 |
| - | Supply, installing, testing and commissioning of 300 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar | 8 | Nos. | 10 | ₹80 |
| - | Providing of 250 micron to 1.5 mm polythene sheet of minimum 1000 gauge @228 gm/sqm minimum weight | 3,128 | Kg. | 10 | ₹31,280 |
| - | Providing and fixing of Extra heavy duty FRP manhole cover with frame of size 840x990 mm of 10 Ton load bearing capacity | 8 | Nos. | 10 | ₹80 |
| - | Providing stringing out, jointing, cutting, and testing of Spirally welded 1800 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 3,290 | Metre | 10 | ₹32,900 |
| - | Providing stringing out, jointing, cutting, and testing of Spirally welded 1600 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 3,323 | Metre | 10 | ₹33,230 |
| - | Laying 2000 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 225 | Metre | 10 | ₹2,250 |
| - | Laying 1500 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 180 | Metre | 10 | ₹1,800 |
| - | Supply, installing, testing and commissioning of 1800 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge | 1 | Nos. | 10 | ₹10 |
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_556726.xls
BOQ • 0.39 MB
3D16HWZ138131.pdf
Additional Documents • 3.33 MB
OT0138131.pdf
Other Document • 0.74 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .