Repairs to roofs,joinery sanitary fittings plastering sunken floor internal water supply and other allied works at AC Records and AC Depot and 58 Coy Supply in the area of AGE B/R-II under GE (North) Ahmednagar

Amount

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engr-in-Charge

M&L for 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge

M & L for 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for 5.5 mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares .exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading etc complete all as specified and directed by Engineer-in-Charge

S&F venetian blind have 2 incl slats that open and close with a chain / cord of vinyl or mini blinds etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium shutter from frame exc 1 sqm but n exc 2 sqm and re-fixing in position after repair etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 10 mm thick POP decorative ceiling (Gypsum anhydrous) 3D model to flat surface over and including, borders and lining as approved by GE/ Engr-in-Charge with anodised aluminium snap grid frame work for false ceiling etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick fitted into the wall as per specifications and drawing PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar. In any situation etc complete all as specified and directed by Engineer-in-Charge

M&L for Vitrified ceramic tiles 10 mm thick of size 800 x 800 mm of any shade as approved by GE as in floor etc and laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat cement slurry of grey cement and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free vitrified anti skid ceramic coloured tiles 8-10mm thick of size 600x600mm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat grey cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Glazed coloured vitrified cermic tilese , 8-10 mm thick as in dado/skirting or on vertical surfaces laid over and including 10 mm thick backing coat in cement and sand mortar (1:4), set and jointed in neat cement slurry of grey cement and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free anti skid ceramic coloured tiles 8-10 mm thick of size 300x300mm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat cement slurry with grey cement and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made laid over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

M& L for 40 mm thick rough dressed Shahabad stone as in floor etc over and incl 15 mm thick screed base in cement and sand mortar (1:6) and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M&L for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in cement and sand mortar (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick including laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 20 mm thick screed base in cement and sand mortar (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm thick backing coat in cement and sand mortar (1:4) including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for coloured glazed ceramic tiles of size 300x450x7mm as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for Digitally printed paver tiles 300x300x 10mm thick with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors laid over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement concrete in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M/L for providing 75mm thick plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base surface finished rough etc complete all as specified and directed by Engineer-in-Charge

M & L for moorum filling in floors or paving laid in layers n.exc. 15cm thick spread leveled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M & L for hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick watered and rammed etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC Type B-1 1:2:4 using 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and floor slab etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per item No 34 (here-in-before) but 6 to 8 mm dia

Material and labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed.

M/L for providing 100 mm thick plain cement concrete 1:2:4 type B2 (40mm graded stone aggregate) as in flooring etc complete all as specified and directed by Engineer-in-Charge

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C1 (1:3:6) using 20 mm graded stone aggregates and setting in cement and sand mortar (1:6) including demolition etc complete all as specified and directed by Engineer-in-Charge

All as per sl item No 38 (here-in-before) but using old block masonry

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of wall and apply two coats of OBD with roller finish etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs wall mixture , wall mounted with bend and over head shower all as per PS clause etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs stop cock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC bib tap 15 mm dia, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge.

S&F fix in repairs wash hand basin full pedestal pattern with Pedastal ceramic cover vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge

S&F fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge

Taking up or down 15 mm bore steel tubing and connections etc complete all as specified and directed by Engineer-in-Charge

All as per item No 52 (here-in-before) but 20 mm bore tubing

All as per item No 52 (here-in-before) but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 55 (here-in-before) but 20 mm bore tubing

All as per item No 55 (here-in-before) but 25 mm bore tubing

S&F rotational molded polyethylene water storage tanks double layer(cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including taking down old water tank etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 58 (here-in-before) but 1000 ltr capacity

All as per item No. 58 (here-in-before) but 2000 ltr capacity

S&F corner glass shelf with bracket. etc complete all as specified and directed by Engineer-in-Charge

S&F towel ring square CP fixed with brass screwes of etc complete all as specified and directed by Engineer-in-Charge

S&F toilet paper holder with flat etc complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China bowl urinal flat back, size of 530 x340 x 360 mm white with grating and union for discharge pipe, urinal spreder (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC mirror cabinet etc complete all as specified and directed by Engineer-in-Charge Make: Cat Part No 555 of Prayag or equivalent in makes mentioned in list of makes in Appendix `C'

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparing old plastered surfaces of walls and applying one coat of OBD, finished with roller finish on plastered surfaces of wall etc complete all as specified and directed by Engineer-in-Charge

S&F 18-19 mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge

All as per item No 69 (here-in-before) but 12 mm

S&F Solar control film 50 micron reflective type (gareware sun control or equivalent etc complete all as specified and directed by Engineer-in-Charge

S&F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and directed by Engineer-in-Charge

S & F Continuous (piano) hinges,brass, bright finish or electrogalvanised Width of flaps (when open) in 30 mm etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm Brass handles, cast type, polished bright etc complete all as specified and directed by Engineer-in-Charge

Dismantling of timber scantlings 40 Sq. cm and over in section, in any position as in framed work etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing. Make : Armstrong or equivalent makes mentioned in list of makes in Appendix `C'

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

S&F of Steel work in tubular trusses including special shaped washer conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 25 mm dia Powder coated curtain rods incl brackets end globes etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mounted cloth drying stand consisting of 16 mm dia powder coated MS rods of CR steel mounted on powder coated MS square pipe, 16- 4 rods, 4ft each, total weight not less than 3.80 Kg, fixed to wall including all fittings/accessories etc complete all as specified and directed by Engineer-in-charge Make -Easy dry Model: Mount it or Equivalent product in Nirali/Prayag.

M&L for cleaning of service tank up to 500 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algae from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank and writing date of cleaning on tank with synthetic enamel paint size of alphabet / numerical shall be minimum 7 cm etc complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank as etc complete all as specified and directed by Engineer-in-Charge

All as per item No 84 (here-in-before) but 501 to 1000 ltrs

An amount of Rs 64,415.00 shall be deducted from BOQ on account of schedule of credit

HG PATHAN CONSTRUCTION COMPANY

M/S MAHESHWARI ENTERPRISES

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

Arihant Construction