RESURFACING OF ROAD AT VARIOUS LOCATIONS OF HAIDERBEG UNDER AGE (I) CIF (K)

Amount

M&L for repair to potholes any exc 30mm, not exceeding 1.0 Sqm each, including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm, putting in Premixed Bituminous Macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30mm, complete all as specified and directed by Engineer-in-Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm and thickness exceeding 50mm but not exceeding 100mm deep and removing thereof as accounted under credit, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick (compacted thickness) WBM in one layer with course aggregates of granite, trap and basalt of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with using 8 to 12 Tonne power roller, complete all as specified and directed.

Preparation of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finaly fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bituminous primer @ 10 Kg / 10 Sqm of paving bitumen VG-10, complete all as specified and directed by Engineer-in-Charge.

M&L for premix macadam, laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm) using power roller of 8 to 10 tonne capacity & compacted to required gradient and camber using paver finish, complete all as specified and directed.

M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg / 10 Sqm of paving bitumen VG-10, complete all as specified and directed by Engineer-in-Charge.

M&L for bituminous premix semi dense asphaltic concrete, 40mm thick (consolidated thickness) with 5.5% binder content (as in semi dense asphaltic concrete) by weight of total mix, rolled and compacted to required camber and gradient, complete all as specified and directed.

M&L two coat painting lines, dashes, arrows, letters, etc on roads pavements and the like exc 10cm wide woith road marking paint, white or golden yellow, complete all as specified and directed.

M/S SUHEEL CONSTRUCTIONS