REMOVING OF OLD UNSERVICEABLE PLY TOP AND FIXING OF NEW PLY TOP IN CHARPOY GI PIPE HELD FOR PBORs AND OTM ACCN UNDER GE (EAST) MATHURA

Amount

Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule and supply and fixing new parts as per given specification and drawing after tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship complete all as specified and as directed. Note : (a) All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (East) Mathura including BSO's Furniture Yard as directed.

CHARPOY GI PIPE PLY TOP : FD-220

Removing the defective/unserviceable ply top from GI charpoy and providing new plywood top of size 6'5" x 3' and 12 mm thick BWR Grade (Make: Century Ply/Greenply/Archidply/Kit Ply) with 4mm dia 65mm long machine made shunken nut/bolts on GI pipe and runners, appropriate hole shall be made with electric drill machine including providing 12mm x 6mm thick 2nd class hard wood beading half round along with the edges of plywood duly smoothened and rounded at corner fixed with fevicol and headless nails complete all as specified and as directed by Engr-in-Charge.

Supply and fixing MS Flat iron of size 40x5mm welded to and between long rail length equal to width of GI charpoy 900mm and drilling two holes for nut bolts and applying two coat of black colour synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

M&L for removing the existing defective long rail of GI Charpoy and fixing new Long rail of 32 mm dia Medium grade GI pipe including cutting and threading and providing three holes of appropriate size in each rail by electric drill machine complete all as Specified and directed. Make of Pipe : Tata/Jindal/Prakash

M&L for removing the existing/defective unserviceable short rail of GI Charpoy and fixing the short rail 32mm dia (except pipe) including cutting threading etc and providing two holes of appropriate size in each short rail by electric drill machine complete all as specified and as directed by Engineer-in-Charge. Note : Pipe obtained from serial item No 2.03 here-in-before shall be used.

M&L for removing the defective unservicable legs of GI pipe charpoy and fixig the legs of 32mm dia GI pipe (except pipe) including cutting threading etc as required and providing MS plate of flat iron 3mm thick and 36mm dia welded to leg bottom and clamp 02 Nos for MNF set and applying two coats of synthetic enamel black paint over and including a coat of red oxide primer over steel surface complete all as specified and directed by Engineer-in-Charge. Note : Pipe obtained from Ser Item No 2.04 here-in-before shall be used.

Supply and fixing GI Elbow 3 way 32mm dia medium grade ISI marked complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Check nuts 32mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MS plate 3mm thick and 36mm dia welding to leg bottom of GI Charpoy pipe and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for running Welding in repair n exc 25mm in length wherever required as directed by Engineer-in-Charge.

M/S Kumar Contractors (BID ID -3188088)

R N AGRAWAL (BID ID -3189257)

L BHIMSEN (BID ID -3189183)

M/S United Builders (BID ID -3189300)

M/s M S CONSTRUCTION (BID ID -3189228)

C.P.Computers (BID ID -3189260)

Supreme Builders (BID ID -3189210)