PROVN OF FALSE CEILING IN DINING HALL OF OFFRS MESS AAD COLLEGE TOILETS NEAR BLDG No P 545 AAD COLLEGE AND 02XTOILETS NEAR BLDG NO P 298 AT GMS

Amount

S&F 12mm thick plain Gupsum Board false ceiling wityh GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with the following :- (a) GI grid channel 30x25x20mm of 24 gauge fixed with rawl plug and screw 450mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40mm of 24 gauge placed @600mm centre to cewntre rom perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side walls (in other span). (d) Gisheet 25mm wise and 20mm gauge suspended fixed with steel fastner to roof ceiling and 1200mm centre to centre inclduing pluging of RCC slab. (e) 12mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Excavation in trenches in dense soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation and getting out complete all as specified and directed.

Providing cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Providing reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in bases of columns, footing,fdn beams, plinth beams etc complete all as specified and directed.

Providing reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in columns complete all as specified and directed.

Providing reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in roof beams, lintels etc complete all as specified and directed.

Providing reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in roof slabs, CB slab complete all as specified and directed.

Providing reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in chajjas complete all as specified and directed.

Formwork to sides of concrete fdn, footings, bases of cols, raft and raft beams, sides and soffits of fdns and plinth beams and similar works vertical or to batter, rough finish surfaces of concrete complete all as specified and directed.

Formwork to sides of pillars,posts,struts,piers,cloumns and stanchions rough finish surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, lintels,cantilevers etc complete all as specified and directed.

Formwork to sides of chajjas etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs,CB slab, landings and similar work, n.exc 200mm thick (Horizontal or slopping) for rough finished surfaces complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete.

M&L mild steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L mild steel TMT bar 5 mm dia and over upto and inlcluding 10 mm dia in stirrups,spacers and binders etc complete all as specified and directed.

M&L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls complete built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with using water proofing compound.(WPC shall be measured and paid seperately) complete all as specified and directed.

M&L for rendering 10mm thick cement plaster with cement mortar(1:3) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with using water proofing compound.(WPC shall be measured and paid seperately).

Supply only liquid water proofing compound

M&L for preparation of new treated surfaces and apply three coat of white wash to walls complete all as specified and directed.

M&L for preparation of new treated surfaces and apply three coat of white wash to ceilings complete all as specified and directed.

M&L for preparation of new treated surfacesand apply two coat of cement base paint to walls complete all as specified and directed.

M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub floors complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in floors finishes complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C 2 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail lock rail &bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F Butt hinge medium wt. cold rolled MS, size 100 mm complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as specified and directed.

S&F 150 mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F factory made UPVC any colour casement openable door made of extruded profile with wall thickness of 2.3mm (+-2mm) door profile with hollow sections frame 60mm x 58mm, sash 60mm x 78mm profile one vertical length will be mitred and fusion welded at all corners incl drilling of holes for fixing haradware and making arrangement for fixing of hardware. EPDM gasket 1.2 (+-0.2mm) thick galvanised steel frame (28mm x 21.5mm) sash (31mm x 27mm), to be inserted in requried profile frame will be fixed to the wall with 8mm x 100mm long fasterners.. Hardware : door handle mad of zinc alloyed powder coated, corner striker, secondary strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, 3D hinges of zinc alloyed powder coated complete all as specified and as directed

M&L non skid coloured ceramic tiles 400X 400X 7 to 8 mm thick coloured or printed jointed in neat cement slurry and pointed in white or colour cement to match the shed of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1.6 complete all as specified and directed

All as per item No 46 above but of size 300 X 200 X 7 to 8 mm thick glazed tile on vertical surface such as skirting and riser over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed

M&L providing glossy designer chequered tiles 20 cm X 20 cm X 22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigment laid over and including screed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed

S&F galvanised steel water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor. 15 mm bore complete all as specified and directed

S&F galvanised steel water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor. 20 mm bore complete all as specified and directed

S&F galvanised steel water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor. 25 mm bore complete all as specified and directed

S & F 500 lit rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoistes and fixed in position complete all as specified and directed.

S & F viterious china wash basin flat back type of size 580 x 450 mm incl cutting and pinning in ends of bracket incl 32 mm chromoum plated waste coupling ,waste pipe ,bracketand incl chromium fancy type long swan neck pillar tap incl tap P or S pattern complete all as specified and directed

S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections inclusding necessary packing, union and cap and fixed complete all as specified and directed.

S & F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleat complete all as specified and directed.

S&F bib taps, cast copper alloy choromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15 mm bore complete all as specified and directed.

S&F 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type)/any type screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. 25 mm bore complete all as specified and directed.

S&F PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S & F 25 mm bore Gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S & F CP Brass chromium plated tubular towel rail 20 mm dia 60 cm long between flanges complete all as specified and directed.

S & F 150 mm salt glazed stone ware drain pipe laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

S&F in repairs 100 mm dia cast iron floor trap with grating incl jointing waste pipe fixed in CM type B1 1:2:4 complete all as specified and directed.

S&F in repairs 100 mm dia cast iron nahani trap with grating incl jointing waste pipe fixed in CM type B1 1:2:4 complete all as specified and directed.

M & L providing precast cement concrete 1:2:4 type B1 using 20 mm graded agg in landing ,cover slab etc set in cm 1:4 complete all as specified and directed.

S&F PVC valveless symphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

M&L PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on wall. Bore of pipe 110 mm. Including PVC clamp complete all as specified and directed.

M&L PVC (SWR) bends, 110 mm bore any radius complete all as specified and directed

M&L PVC (SWR) couplers, 110 mm bore complete all as specified and directed

M&L PVC (SWR) branch pieces, double, (double Y) equal or unequal. 110 mm bore complete all as specified and directed

M&L PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed

M&L PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed

S&F in 100 mm bore stack clamps out of 50x5mm by flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.

M&L PVC(SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed

S&F in repair 40 mm waste coupling of PTMT (half or full threaded) but suitable for urinals etc) (Minimum weight 40mm – 60 gms) complete all as specified and directed

S&F in repair waste pipe for urinal/wash hand basin complete all as specified and directed.

S&F vitreous china bowl urinal flat back, size of 465 X 355 X 265 mm white (minimum), with CP grating and union for discharge pipe etc complete all as specified and directed

S&F Vitreous china urinal partition white of size 310 x 700 mm complete all as specifeid and directed.

Returning, filling in any type of soil, including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for Cement concrete type E2, 1:5:10 (using 40mm graded stone aggregate) in fdn filling and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 type BO (12.5mm graded aggregate) in foundations, incl rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 type BO (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for brick work in CM 1:4 with sub class 'B' bricks strainght or curved on plan to any radius in half brick thick wall complete all as specified and directed.

M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plastering in cement mortar (1:6) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plastering in cement mortar (1:4) in ceilings on fair/ unfair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S &F Glazed ceramic coloured pattern tiles of size 350X250X7 mm/450X350X7 mm X 7 to 8 mm thick glazed tile on vertical surface such as skirting and riser over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed

M&L for 15mm thick screed bed or bedding layer of CM 1:6 for laying floor tiles complete all as specified abd directed

Preparing New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

S & F PTMT grating 125 mm dia complete all as specified and directed.

S & F 15 mm bore chromium plated pillar taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair vitreous china wash down closet pan pedestral pattern with P or S trap white fixed etc complete

S & F Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size (flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand.

S&F 16 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

S&F 20 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

S&F CP anodised tubular hanger double coat hook etc. Make Jaguar cat-AQN 7761

S & F CP hand shawar (health faucet) with 1.0 mtr long easy flex tube for 15 mm bore all as specified and directed. Make Jaguar cat ALD 565

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius.

M& L 10mm thick rendering on fair faces of brick wall or concrete surfaces in cement motar 1:6 and finished even and smooth using extra cement by using water proof compound

Supply only Integral water proofing compound

M&L for roof treatment with polymeric water proofing membrane as under:- (a) Applying bituminous primer conforming to IS 3384-1965 @ 0.30 Kgs/sqm. (b) APP modified bitumenous membrane 3 mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions. (c) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane.

All as per item 130 above but on vertical surfaces over a coat of hot bitumen 85/25 grade @ 1.00 kg/Sqm

S & F 1000 ltr Rotational moulded three layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.

S&F 15mm dia gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed

S&F20mm dia gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed

S&F Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded broken stone aggregate) as in floor/plinth protecton , finish even & smooth without using extra cement all as specified and directed.

S&F in 100 mm bore stack clamps out of 50x5mm by flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.

M & L Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed.. Make : Anchor/Havells/standard/C&S

S & F ceiling fan regulator electronic step type socket mounting type complete all as specified and directed. Anchor/Havells/standard/C&S

Taking down the exisitng ceiling fan and Refixing duly cleaning and minor servicing of any sweep and cap , applying two coats of synthetic enamel paint incl change of ball bearing complete with connecting accessories and down road 15mm GI pipe duly modified to embedd the ceiling fan of approx 1.5 mtr heigt from the ceiling complete all as specified and directed.

S & F recess mounting LED low profile slim fit downlights with high lumin output of 12watts cap with ceiling cutout 160mm oval/round of ht 25mm complete prewired incl necessary electrical connections complete all as specified and as directed. (Make : C&S/ Havells/Bajaj/Philips)

S & F recess mounting LED low profile slim fit downlights with high lumin output of 18 watts cap with ceiling cutout 210 x 210 mm of ht 17mm , prewired incl necessary electrical connections complete all as specified and directed. (Make : C&S/ Havells/Bajaj/Philips)

M&L for replacement of 2 Runs of cable PVC insulated but unsheathed1.50 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 1.5 Sq mm, stranded copper conductor complete all as specified and directed. (Cable make Anchor/Havells/Finolex)

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC concealed conduit incl continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box , including laminated top sheet cover,washer & screw complete all as specified and directed for the following:- (a) One light point controlled by one, one way switch.

(b) All as per itme No 120 above but One exhaust fan point controlled by one, one way switch.

S/Fix ceiling rose, bakelite three terminal complete all as specified and directed.

Supply & fix LED tube light along with fixture,18W complete all as specified and as directed

S & Fix sheet metal enclosure double door MCB DB, SPN 4 way complete all as specified and directed

M&L for GI tubing 25-32mm dia medium grade, mounting bracket and end nipple/nozzle of the bracket of size suitable to house the light fittinhg , with its Galvanised Flat Iron clamps with suitable set of nuts, bolts, washers etc complete all as specified and directed

Supply and fix street light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs (8x2.5 HPLED/LS) as light source and electronic driver etc complete all as specified & directed (Make C&S / WIPRO / Bajaj / Phillips / Havells) (Note : warrenty of PCB @ 3years)

S & Fix MCB SPN 6-32 Amp 10 KA 240 Volts complete all as specified and directed.

S & Fix MCB, SP 6 to 20 Amp 240 Volts rating complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

S&F PP-R 3 layer polpropylen random copolymer concealed pipes SDR- 7.4 (PN- 16) un Stabilized and antimicorbial fsion welded having thermal stability of for hot & cold water supply all PPR plain & brass threaded polypropylene of size 25 mm dia (OD) and random fittings laid in trenches complete all as specified and directed.

S& F of PP-R gate valves (Brass inlet) as per requirement of size 25 mm dia complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of Size 25 mm OD by providing and fixing tee including cutting and making fusion joint etc all as specified and directed.

M & L for construction of brick masonry value pit chamber of size 600mm x 600mm x450mm including necessary excavation and earth work in any type in CM (1.4) complete with valve pit cover (steel) with locking arrangement as specified ad directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve for size 10Sqmm 2 core complete all as specified and as directed (connection from Tech Block Panel board) : - Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items Make:- Havells / polycab / cci / nicco / Gloster

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying flyash building bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

Boring across the road/hard surface horizontally with machanical boring equipments not less than 50 mm bore dia all as specified and directed.

S&F MCB SPN 6-32 Amps complete with necessary elect connections all as specified at the exisitng DB with two way DB Enclosure with necessary elect connections

S&F 40mm bore Galvanised steel tubing light grade including all fittings, laid in trenches , fixed to walls or on poles etc after taking out the rusted out/wornout pipes complete all as specified and as directed

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

S & Fix MCB, SP 6 to 10 Amp 240 Volts rating

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher. Complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

M/S S.K GHOSE

DHABALESWAR ENGINEERING WORKS

M/S. KISHAN ENGINEERING

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

M/S JAGANNATH SASMAL

G.KRISHNA MURTHY AND PARTNERS