GE/BENG/22 OF 2020-21 PROVN OF IRON STAIR CASES OPERATOR ROOM WITH ANGLE IRON AND SPL REP WKS TO BOUNDRY WALL GD POST OF FAD UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Demolition cement concrete (unreinforced) in ground floors & paving n.exc. 15cm thickness and removal of debris from site all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free (350mm x 450mm) x 7 to 8mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.complete all as specified and directed.

Ditto all as per item no 7.00 above but on dado /skirting over 10mm thick plaster in cement mortar(1:4) complete all as specified and directed.

Demolition of brickwork masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F S&F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed for 150 mm all as specified and directed.

S&F mild steel pressed handles oval type stove enamelled black size 150 mm all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300mm mild steel sliding door bolt plate type not less than 12mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S&F in repairs steel windows with side hung double shutter ( one for glazing and other for mosquite proofing ) including projection type hinghs with steel handle, and steel pag stay, complete with glazing bars, dovetailed or welder all as specified.

S&F in repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty in squares n. exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty in squares n. exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 4mm thick figure glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for applying one coats of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with particle board core as per specification & drawing complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 20 mm thick in two layers (10+10) on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement and including preparing surface complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar (1:3) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surface of ceiling and two coat of white wash over a coat of chalk whiting primer on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper of approved tint on wall over a coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old plastered wall surfaces complete removal existing treatment and applying two coats of oil emulsion distemper of approved tint complete all as specified and directed.

M&L for preparation of old surface of ceiling and two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper of approved tint on wall over a coat of 1mm thick Birla/Asian wall care putty complete all as specified and directed.

M&L for forming V- grooves in plaster n exc 10mm deep and n exc 10mm on face complete all as specified and as directed.

M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, cover fillets etc including old decayed water proofing treatment of any type all as directed

M&L for 25mm thick cement concrete 1:2:4, type B-0(using 12.5mm graded crushed stone aggregate) as leveling course of roof and finished the surface even and smooth without using extra cement with mixing of liquid water proofing compound as per manufacurere instructions complete all as specified. (Note:- water proofing compound shall be measured and paid seperately.

M&L for surface painted with one coat bituminous primer @ 0.40 Kg per Sqm confirming to IS158, a layer APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) laid over a coat of bitumen @ 1.20 kg per sqm on primed surface by torced application side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints and manufacturer's instructions and provided upto a height of 60cm in the parapets by cutting a groove and finished by membrane flashing painted with bitumen @1.2 kg per sqm before application of aluminium paint complete all as specified and directed.

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed.(Pidiproof of Dr.fixit or equivalent)

M&L for one coat of silver paint @ 0.125 Kg/Sqm over APP membrane complete all as specified and as directed.

Demolition of reinforced in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as directed.

M&L for Precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate inmanhole cover / septic / soak pit and similar work including formwork set in cement mortar 1:4 all as specified and directed.

S&F water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

Taking down steel tubing & connections including removal to store of 15 mm dia bore of pipe complete all as specified and as directed

Taking down steel tubing & connections including removal to store of 20 mm dia bore of pipe complete all as specified and as directed

Taking down steel tubing & connections including removal to store of 25 mm dia bore of pipe complete all as specified and as directed

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required)for repairs, cleaning etc and hoisting if required reconnecting and refixing in postion etc exc 250 ltrs and nexc 500.00 ltrs all as specifed

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F In repairs Bib taps, 15mm bore cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair gun metal glove or gate valve 25mm bore, with iron wheel head, screwed down both ends for iron pipe and fixed complete all as specified and directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S&F in repairs vitreous china wash hand basin flat back basin white size 550x400mm (Oval shape) excluding taps but including CP waste coupling 32mm bore, wase pipe 610 long etc a pair of MS bracket and cutting for pinning in ends of brackets complete all as specified and directed.

Blank

S&F in repairs Pillar taps, 15mm bore dia of pipe, fancy type (long neck) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with 2 nos PTMT nuts 30cm long fixed with all as directed.

S&F repair CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F soap dish of best quality, any size fixed to plugs with chromium plated brass screws complete all as specified.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

M&L Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150x150mm set and jointed to pipes with cement mortar 1;1 inluding demoltion complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F 110mm bore PVC (SWR) WC connector bent type complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

Surface dressing not exc 15cm deep all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Ditto all as per item no. 122.00 here-in -before but exceeding 1.5m deep and not exc. 3.0m deep.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Blank

M&L RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in chajjas, shelves complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 107.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls complete removal of existin treatment and applying two coats of cement base paint over complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick wall, finished the surface even and fair complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring, path paving etc complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F "RAJSHRI " BRAND PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600 Kg/Cbm density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2'x2' (600x600mm).the aluminium framework is supported from the ceiling with the help of "J" hook and GI wire/6mm MS rods of required sizes to maintain proper level etc.The aluminium framework is supported on side wall with the use of aluminium L-section of size 1"x1" (25X25mm) angles etc. complete as per maunfacturers specification & drawing and directed.

M&L for Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed or bedding layer in cement mortar (1:6) in floor etc complete all as specified and as directed.

M&L for chequered cement tiles of approved quality size 20cmX20cmX 25mm thick on floors, footpath etc over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

Cutting holes in brick walls exc. one half brick but not exc. Walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully existing copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down carefully existing unservicable DB, switch fuse unit, enclosure for MCB DB (inclusive of MCBs of any type and capacity) and making good disturbed surface all as specified and as directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 131.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 131.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 131.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

M&L for point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc all as directed.

All as per item No 135.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 135.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 135.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

S&F switch socket outlet combination 2 in 1, 5 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 5 in 1, pin 5/15 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F ceiling fan regulator electronic stepping type, SP 230 volts, suitabe for 1200mm / 1400mm sweep ceiling fan inliding necessary electric connection complete all as specified and directed.

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

All as per item No 145.00 here-in-before but 9 watt 2' feet long all as specified and directed.

S&F Building security LED light luminaire fitting 1X20 W new generation energy saving & envoirmental friendly long life versalite pressure die-cast aluminium IP66 roadway luminarie with high power LEDs as light source and electronic driver with 1.5m long and PC cover having top openning opreate driver compartment all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F ceiling fan 5 star 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.

S&F exhaust fan AC single phase 240 V of size 300 mm sweep with louvre complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed. Make : Havells / Bajaj / Philips

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 8 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door triple pole & Neutral 4 way 415 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug socket with TPN one MCB of 63 amp 415 voltscomplete all as specified and directed.

S&F MCB double pole 6 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB four pole (TPN) 240 volts,100Amps, breaking capacity 10KA, 415 Volts 'C' curve all as specified and directed.

S&F MCB four pole (TPN) 240 volts,63Amps, breaking capacity 10KA, 415 Volts 'C' curve all as specified and directed.

S&F on load changeover switch 415 Volts ib sheet metal enclosure 4 pole of capacity 63 Amps all as specified and directed.

M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification . GI Electrode Shall be tested from CPRI.The earting pit should be cover with PCC (1:2:4, type B-1) cover ,of 450 x 450 mm complete all as specified and directed. (Make: ASHLOK / INDELEC / JMV / TERCEL).

M&L for earthing complete of advance encapsulated compound based CPRI tested maintenance free, pipein-pipe technology upgraded (Zinc & Alloy coated). Zinc coated (80-100) microns with pure zinc(99.9%) & alloy coating (200-250) microns. Earthing system confirming IS-3034 the outer and inner pipe should be 76.2mm & 41.9mm dia, 3 mtr length Zinc coated with additional special alloy coating 300mm on the topside for additional protection of the terminal the annular space between the pipes being filled up with compact fill (CF) (Crystalline conductive compound) The compact fill (CF) mixture which is machine pressedin the pipes should not disintgrate or collapse when outer pipe corrods. the inner pipe should beextended with terminals for connectivity. The job includes digging the pits and refilling the same by electrodite/conductolite back fill comopound (Ground Enhancer) the BFC should be eco friendly it should not contain environmentally hazard materials. The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. In area where soil condition is bad, good earth is to be arranged to fill the excavted pits by mixing the same with BFC 4 bags (as per soil condition) extra per pit/unit. As the earth electrode is the main component of the earthing system which is in direct contact with the ground and thus provides a means of releasing or collecting earth leakage current. The materials should have good electrical conductivity & anti corrosion property in wide rage of soil condition complete and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. Make ASHLOK Model- ASEEL or equivalent

Taking down carefully existing unservicable/ faulty cable any size from trench / pole all as specified and as directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 6 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

Material and labour for galvanized iron tubing 50mm bore light grade with all fitting for protection of cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and directed. (Note: Excavation, earth work shall be measured and paid separately)

Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. all as directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 16 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 16 sqmm as earth continuity conductor drawn through PVC conduit ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 33032.00 (refer Tender Srl Page No 44). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

GAYATRI BUIDERS

BISWAJIT SAHA

M/S AHUJA TRADING

M/S JANATA CONSTRUCTION