CERTAIN REPAIRS TO AREA DRAINAGE PATH WAYS CULVERTS COMPOUND SECURITY WALL FENCING OF MD OTM ACCN OF UNDER GE NORTH BANGALORE AND REPAIR RESURFACING OF ROADS PATHS REPLACEMENT OF DAMAGED ROAD FURNITURE ETC AT NHQ NAVAL DET NTG NLC UNDER GE NO

Amount

Demolition of reinforced cement concrete as in ground floor or paving not exceeding 15 cm thick (below or above ground level), and disposing of debris to a distance not exceeding 1.5 km at locations shown by Engineer-in-Charge, complete all as specified and as directed.

Demolition of cement concrete and paving not exceeding 15 cm thick (below or above ground level), and disposing of debris to a distance not exceeding 1.5 km at locations shown by Engineer-in-Charge, complete all as specified and as directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description, complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris to a distance not exceeding 1.5 km at locations shown by Engineer-in-Charge, complete all as specified and as directed.

Excavating in trenches, in hard / dense soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out complete all as specified and as directed.

Returning, filling in (using soils), including spreading, leveling, watering and well ramming, soil in layers not exceeding 25 cm complete all as specified and as directed

Removing excavated surplus soil to a distance NOT exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Material and labour for, Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed. NOTE :- Steel for Reinforcement will be measured and paid separately.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum average compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:4 complete all as specified and as directed.

Material and labour, for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. complete all as specified and as directed.

Material and labour for, Plain Cement Concrete, (1:2:4), type B0, using 12.5 mm graded stone aggregates as in coping, bed plates, fixing of posts / chajja, kerbs, padding and staging of water tanks, roof leveling concrete water troughs and the like including weathering, lightly rounded or chamfered angles and throating, including necessary forms and moulds all as specified and as directed.

Material and labour, for Walling of random rubble stone masonry (Bangalore type), brought to courses, well bonded, bedded and solidly hearted, built in CM(1:6), complete all as specified and directed.

Material and labour, for Walling of random rubble stone masonry (Bangalore type), brought up to courses, well bonded, bedded and solidly hearted, built in CM(1:6), but except stone complete all as specified and directed. NOTE :- Serviceable stones obtained from Sl item No 3 here-in-above, shall be reused in the work.

Material and labour for, rendering 15 mm thick on fair faces of brick work or concrete surfaces and stone masonry surface in cement mortar 1:4 finished plastered surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for, keyed pointing to random or polygonal rubble, un-coursed or brought up to courses in Cement Mortar 1:4, complete all as specified and as directed.

Raking to random rubble or polygonal rubble un-coursed or brought up to courses providing Material and labour for, keyed pointing to random or polygonal rubble, un-coursed or brought up to courses in Cement Mortar 1:4, complete all as specified and as directed.

Preparation of new or previously untreated plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed.

Material and labour for, Mild steel TMT bars of 10 mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified

S& F framed work such as grills, gratings, guard bars etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of white wash on wall surfaces all as specified and as directed.

All as per item no 25 above, but two coat of white wash

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Dismantling of Stone set paving of any description or in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed

M&L cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) 75 mm thick as in sub base of flooing etc complete all as specified and as directed

M&L Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

Supply and spreading of M-sand as cushioning material complete all as specified and directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L for rubber moulded pre-cast Kerb stones of cement concrete 1:2:4 (20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface pointed and jointed in CM 1:4 etc complete all as specified and as directed

Ashraya Nirman

Janatha Trading Corporation

Karthick Constructions

Matha Enterprises

Sangam Construction

Eeguchi Constructions

M.S.Trading Company

Vasavi Electricals

Chaitanya Constructions