Loading
Loading…
Loading…
Tender Value
₹35.9 L
EMD Value
₹35,910
Closing Date
11 Jun 2026, 12:00 pm6d left
SE, EUDC-TECHNICAL, NOIDA
33/11 KV SUBSTATION, SECTOR-18 FIRST FLOOR, OPPOSITE SAB MALL, NOIDA
EARTHING FENCING PLINTH OF DTs AND OTHER WORK IN BP 2026-27 UNDER EUDD 11 KV YEIDA
2026_PVVNL_1153783_1
27/EUDC-T/2026-27/NOIDA (WORKS)
Open Tender
Electrical Works
EUDD 11 KV YEIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SE, EUDC-TECHNICAL, NOIDA
₹35,910
Yes
26 May 2026
26 May 2026
11 Jun 2026
26 May 2026
11 Jun 2026
26 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : - | |||||
| 1.01 | LT XLPE Cable 3.5x150 Sq.mm | 1 | Mtrs. | 100 | ₹100 |
| 1.02 | LT XLPE Cable 1x240 Sq.mm. | 1 | Mtrs. | 100 | ₹100 |
| 2Installation / Erection / Fixing of following material for complete the work of DT & other related work with disconnecting & reconnection of cable for DT Metering etc. as per RESSPO norms by the contractor at his own cost : - | |||||
| 2.01 | LT XLPE Cable 3.5x150 Sq.mm with lug | 1 | Mtrs. | 100 | ₹100 |
| 2.02 | LT XLPE Cable 1x240 Sq.mm. with lug | 1 | Mtrs. | 100 | ₹100 |
| 3WORK OF PROVIDING AND FIXING OF 120 NOS. NEW WIREMESH FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT DIFFERENT PLACES AS PER FOLLOWING (All Material provided by contractor for above work.) :- | |||||
| 3.01 | 1. Frames of size 4x5x2 Meter for each fencing of LT Sub-stations. (All Material provided by contractor for above work.) or as per site requirement.
2. The fencing shall be fabricated out of MS angle iron of size 50x50x6 mm having 2 Nos. legs of 75 Cm. long in each frame duly welded and fixed with wire mesh of size 75mm 25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of duly Welded along with cross bracing of 25x5 mm MS flat on every frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast.
3. Every frame after Fabrication will be painted with one coat of red oxide and two coats of Green synthetic enamel paint of approved make after proper cleaning.
4. The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site.
5. Fabrication and providing of wire mesh fencing frame for gate of size 4’x6’. Fabricated as per above specifications with proper locking arrangement. | 1 | Jobs | 100 | ₹100 |
| 3.02 | Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 18 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work) or as per site requirement. | 1 | Jobs | 100 | ₹100 |
| 4 | Geo-tagging of complete work as per UPPCL order No. 2259 Dated 21.08.2025 (Letter attached with condition). | 1 | Jobs | 100 | ₹100 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.39 MB
DOC.pdf
Tender Documents • 1.68 MB
BOQ_2161413.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid