Improvement works to the park at Hudco colony in Ward no 52, East zone

Amount

Dismantling and removing the existing damaged Glazed tiles on walls and ceramic tiles from floors including all cost etc complete.

Dismantling the old Damaged Brick Work as per the instruction of Dept officers

Dismantling the damaged cement concrete as per the instruction of Dept.Officers including all initial lead and other labour charges

EARTHWORK EXCAVATION for foundation in all soils and to full depth as my be directed except in rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with standard specifications.

Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers

CEMENT CONCRETE 1:4:8 (One Cement, four sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification.

Supplying and erecting centering for side and soffits including necessary supports and strutting upto 3.29m high for plane surfaces such as side slabs of RCC boxing and similar vertical RCC slabs, FACIA, Drop etc., in all floor with all cross bracing using mild steel sheets of size of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25X25X3mm for boardinglaid over country wood joists of size 10cm x 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123B Part-II

Providing centering for sides and so fits of R.C.C. works such as Plinth beams that beams plain surface etc., complete including shuttering upto 3.30 M height using mild steel sheet of size 90 c.m x 60 c.m and 10 gauge stifer with M.S. angles of size 25 mm x 25 mm x 3mm laid over silver w.c.wood joints of size 10 c.m. x 6 c.m. spaced at about 90 c.m. c/c and supported by casurins props of 10 c.m. to 13 c.m. dia spaced 75 c.m. centre to centre includinng cost and conveyence of all meterial at site and labour charges for centering ect., complete complying with standard specification.

Supplying, fabricating and placing in position HSD steel rods for reinforcement including the cost of steel and binding wire etc. complete and as directed by departmental officers

Reinforced cement concrete 1:1.5:3mix(One cement One and Half sand and Three aggregates) mix for all reinfoced cement concrete works using 20 mm ISS gauge hard broken grainte machine crushed metal including cost and conveyance of all materials at site including all labour charges for concrete mixing, laying, watering, curing properly but excluding cost of steel and centering etc., complete complying with standard specifications.

BRICKWORK in cement mortar 1:5 (One cement and five sand) using second class Ground moulded chamber burnt bricks of size 23 x 11 cm x 7 cm for the following including curing etc., complete complying with standard specifications

Plastering with CM 1:5 (One cement and five sand) mix 12mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications

Painting TWO COATS over the the base coat with best and approved quality of EMULSION PAINT over the plaster surface including cost of paint and other materials, brushes,scaffolding charges etc,m, complete complying with standard specifications

Painting with enamel paint two coats for doors,windows, grills, weldmesh etc

Flooring finishing with first quality Anti skid CERAMIC TILES of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 30W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb complete direction as per the departmental officers

Wiring with 2 x 1.5 m2m. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD 24)

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283/1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ+/- 5 %

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and run of 2 of 4 m2. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD57)

Supply of GI, PVC and UPVC pipes and specials etc., completed.

50 mm dia UPVC pipe

65 mm dia UPVC pipe

42mm Brass Isolation Valve

22mm Brass Isolation Valve

Supply of Eletrical items etc., completed.

63 A TP MCB ISOLATORS

32 A FP MCB ISOLATORS

32 A TP MCB ISOLATORS

32 A DP MCB ISOLATORS

10A Single Pole MCB ISOLATORS

Supply of water tank etc., completed.

Supply and Laying of 2 core 6 sq.mm. PVC Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 core 6 sq.mm. PVC Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 656

Supplying and fixing PVC door frames using section 405 (4.5X4cm) including inserting 20X20mm country wood all-round, fixing in masonry with necessary wooden plugs and fixing the frame using stainless steel screws in wooden plug, complete – Matt finish

PVC / Fibre Glass framed 5.5mm thick mirror, shelf type 600mm x 450mm

Cost of brass Chromium Plated Towel Rail 600mm as per the instruction of Dept officers

CP soap tray 150 x 100mm as per the instruction of Dept officers

Supply and Fixing of Water fountain with LED water proofing lights

S RAJU (BID ID -1356855)