Fabrication, Supply and delivery of 4 nos of Dog Catch Vehicle with fixed and Removable type Dog Catch Cages at ACMC

Amount

Fabrication, Supply and delivery of Dog Catch Vehicle Removable Type of overall Length not Less Then 2400 mm Overall Width not Less then 1400 mm. The Structure made of Mild steel Tubes 32x32x1.6 mm thick able to aborsb Fatigue Loads and Vibrations of its service to avoid crack Formation due to Dynamic load capacity, structures should be v-groove weld jointed to make completly constrained structure, Structure Mounting with bolds and Nut should be avoided. The Structure is mounted to chasis using Nut and Bold using Chusion pads and High Toughend Steel Fasterners. Flooring Made out of Chequred Aluminium Sheet of 2 mm thick Supported by Frames in every 2' Lenght in width vise and final output able to widthstand Bending under static and Dynamic Load conditions. Exterior Panneling On Top made of GL sheet 1 mm thick and interior pannel made of 1 mm thick SS304 Grade Sheet . Between Pannels Low Thermal Heat Condutivity Material Like Polyurathene Foam Materials insulate And reduce the Conductive Heat Transfer To the Structure provided. The Sides of the Chamber Should be Adequatly weld mesh For air Circulation . Total of 12 Compartments For Dog Carryiny Should be of dimensions 750 x 750 x 450 mm Provided. Sides With Top and Bottom Top Openable Doors provided separately with Locking and holding at full openable position arrangements. Back Door with Butterfly type with suitable access Facilities . Lamps of 2 nos in interior and 4 nos in Extrior is provided. Proper sealing of Exposed Material to environment using synthetic Enamel paints and drain holes with hose arrangements for water drain facilities provided. The seating arrangements at the Front with cushion seats . A 200 Liter Capacity Water Container For Sanitation Purpose Provided. A First Aid Kit With Essantial Medicines and Consumables provided alone the back side of the vehicle Opposite to Fuel Tank.

Fabrication, Supply and delivery of REMOVABLE TYPE Dog Catch Cages Of 12 nos each made of SS 304 metal 25 x 25 x 3 mm thick SS angle Frame completely covered all sides with SS304 Grade Weld Mesh one side opening with hinges and lock arrangements Bottom 1 mm SS plate Stopper

Fabrication, Supply and delivery of Fixed Type Dog Catch Vehicle of overall Length not Less Then 2400 mm Overall Width not Less then 1400 mm. The Structure made of Mild steel Tubes 32x32x1.6 mm thick able to aborsb Fatigue Loads and Vibrations of its service to avoid crack Formation due to Dynamic load capacity, structures should be v-groove weld jointed to make completly constrained structure, Structure Mounting with bolds and Nut should be avoided. The Structure is mounted to chasis using Nut and Bold using Chusion pads and High Toughend Steel Fasterners. Flooring Made out of Chequred Aluminium Sheet of 2 mm thick Supported by Frames in every 2' Lenght in width vise and final output able to widthstand Bending under static and Dynamic Load conditions. Exterior Panneling On Top made of GL sheet 1 mm thick and interior pannel made of 1 mm thick SS304 Grade Sheet . Between Pannels Low Thermal Heat Condutivity Material Like Polyurathene Foam Materials insulate And reduce the Conductive Heat Transfer To the Structure provided. The Sides of the Chamber Should be Adequatly weld mesh For air Circulation . Total of 6 no of Compartments For Dog Carryiny Should be of dimensions 750 x 750 x 450 mm Provided. Sides With Top and Bottom Top Openable Doors provided separately with Locking and holding at full openable position arrangements. Back Door with Butterfly type with suitable access Facilities . Lamps of 2 nos in interior and 4 nos in Extrior is provided. Proper sealing of Exposed Material to environment using synthetic Enamel paints and drain holes with hose arrangements for water drain facilities provided. The seating arrangements at the inside with cushion seats . A 2oo Liter Capacity Water Container For Sanitation Purpose Provided. A First Aid Kit With Essantial Medicines and Consumables provided alone the back side of the vehicle Opposite to Fuel Tank.

Fabrication, Supply and delivery of Fixed Type Dog Catch Cages Of 8 nos each made of SS 304 metal 25 x 25 x 3 mm thick SS angle Frame completely covered all sides with SS304 Grade Weld Mesh one side opening with hinges and lock arrangements Bottom 1 mm SS plate Stopper

Supply and delivery of Dog Catch net material made up of Mild Steel provided such that net weaved of rope, inner dia not more than 3feet cross sectional dia of Mild steel not less than 6mm and handle made up of wood or any equivalent material comfortable for handling, entire MS Material must be well epi coat painted as per standards

Senthil Murugan Works (BID ID -1562315)