SPECIAL REPAIR TO BLGD NO P-12 AND PROVN OF FIRE FIGHTING POINT AT AGE B/R-II AND AGE E/M UNDER GE BABINA

Amount

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.

M&L brick work(on parapet wall) with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.

Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n exc 4 sqm each etc complete all as specified and as directed.

Taking down shutters of any description nexc 1 sq.m each removal to store complete all as specified and as directed.

Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

M & L for complete removal of existing treament on ceiling and applying two coat of white wash all as specified and as directed.

M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.

M & L for complete removal of existing treament and applying two coat of cement base paint on external surface complete all as specified and as directed.

M&L for 1mm thick JK/Birla wall care putty inccluding prepration of surface complete all as specified and as directed

M&L renderig 15mm thick in cement mortar 1:6 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L renderig 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for preparation of new plastered surface and applying two coats of oil bound distemper on walls complete all as specified and as directed.

M & L for preparation of new plastered surface and applying two coat of cement base paint on external surface etc complete all as specified and as directed.

M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete all as specified and as directed.

M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

S&F 100mm dia cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F 75mm dia cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls and taking down old PVC/CI/Concrete pipes complete all as specified and as directed.

S&F PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm dia cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe in trenches complete all as specified and as directed.

S&F Cast iron bends any radious 100mm bore complete all as specified and as directed.

S&F Cast iron bends any radious 75mm bore complete all as specified and as directed.

S&F 75mm dia cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 100mm dia cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 75mm bore CI floor trap complete all as specified and as directed.

S&F Cast iron cowl 100mm bore complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick in CM(1:6) etc complete all as specified and as directed.

Rounding to edges of stone slabs such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe. Over all size 495mm x 420mm, bowl size 410mm x 330 mm x 160mm and to be fixed with granite with proper gradient for wash out of water complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.

S & F factory made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete.

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.

S & F butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed.

S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed.

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.

S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 19/20 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed.

M&L for 75mm thick cement concrete type 1:3:6 C-2 (using 40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment over and including 50 mm thick sand cussion complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only in item no 68

Supply only integral water proofing compound complete all as specified and as directed.

M&L One coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated complete all as specified and directed.

M&L for APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) laid on primed surfaces by forced application complete all as specified and directed.

M&L for toping layer of precast machine pressed cement concrete tiles of size 25cm x 25cm x 22 mm thick conforming to IS : 1237-1980 shall be laid in neat cement slurry over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with chemical like Tile grout or equilent complete all as specified and directed.

S & F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed.

S&F figured glass ,pin head type 3mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed.

S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including using standard aluminium section including necessery fittings and fixtures complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid seprately.

M&L for applying two coats of OMNIPLAS EP-101 epoxy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd. Bombay or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor and wall of sunken portion complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling & mass concrete in sunken floor complete all as specified and as directed by Engineer -in-charge.

S&F fancy type stainless steel conduit rod 25mm dia with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including bracket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.

S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed.

S&F in repair 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete.

S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed.

S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.

Supply and fixing stainless steel plate rack of size 750x900x250 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.

Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed.

Supplying, laying, jointing and testing 150mm dia salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed

M & L cement concrete bed to 150mm dia drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate.

M&L for burnt Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25cm in hard dense soil complete all as specified and as directed.

Removal of excavated materials n.exc 50m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and as directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed.

S&F for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed.

S&F for mild steel TMT bars 5mm and over upto and including 10mm in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed.

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

M & L for 1.60mm thick mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L renderig 15mm thick in cement mortar 1:4 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M & L preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in CM (1:4) complete all as specified and directed.

M & L for 100mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub base/floor finish even and smooth without using extra cement complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummerslintels,cantilevers, shelves including sup­ ports, overhangs,etc.also splays between floors and beams,etc rough finished surface of concrete complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete complete all as specified and directed.

M & L for RCC M-20 in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for RCC M-20 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base/floor finish even and fair complete all as specified and directed.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .

Description same as per item No 123 above but one fan point controlled by one switch & regulator.

Description same as per item No 123 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description same as per item No 123 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description same as per item No 123 above but but control by two way switch with cable 1.5Sqmm.

Description all as per item No 123 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole two way complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 40mm including 40mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, of size 10 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specifief and as directed.

Supply and install double cylinder heavy duty car washing pump complete with 3HP motor having 1400RPM, single phase electric motor having washer kit belt adjustable nozzle pulley with base frame pressure tank and asses pressure generated in range of 300-325PSI complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB, 25A complete all as specified and as directed.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.

Supply and fixing light fitting energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser including electrically connecting using flexible cord 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm. Make: Havells cat. part. No LHEOAOP7UZ6W010 or equivalent make as mentioned in appendix B to PS..

S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Ltrs, BEE 5 star ratedcomplete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed

S & F regid non-metallic PVC conduit not less than 32 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12,complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.

Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

Supply and fixing exhaust fan AC single phase 230/240V of size 300mm sweep steel body, 1400RPM with louvers complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces, matching with the existing surfaces, necessary fixing arrangement such as fastener bolt, nuts, washers etc of appropriate size complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 X 4 sq. mm complete all as specified and directed.

Supply and laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of pipe/cable including getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, leveling , watering and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.

S&F Ceiling fan copper wound, 1200mm sweep, BEE 5 star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size all as specified and directed

M&L galvanised iron pipe of 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S Kharya Associates

M/s Ravi Traders