Repair/Renovation of Forest Check Post Vailoo Daksum Range. Anantnag Forest Division.

Amount

Engagement of labour for removing of false ceiling and CGI sheetingand refixing the same after repairment of damaged chimney.

Brick work with common burnt clay Modular bricks of class designation 7.5. in superstructure for chimney: cement mortar 1:3 ( 1 cement :3 coarse sand) incl carriage.

Extra for providing and placing in position 2 Nos.6mm dia M.S. bars at every third course of half brick masonry.

15 mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix :1 : 3 ( 1 cement : 3 fine sand)

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

P/applying of 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. Same as calculated in plaster item.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade

Finishing walls with textured paint of required shade on new work (two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm.(interior finishing).

Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work.

Renewing glass panes and re-fixing existing wooden fillets, fixing of new panels where necessary float glass panes of thickness 4.0mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040x bowl depth 178mm

Providing and fixing of mirror of superior quality with all fittings and fixtures complete.

Providing and Fixing PPR pipe lines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/ sockets etc wherever required of following nominal sizes

25mm dia

20mm dia

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Health fucet

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing ball valve (brass) of approved quality, with all fittings and fixtures complete.

25 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing gun metal gate value C.I wheel of approved quality (Screwed end )25mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete.

Providing and fixingof Gyser Venus make ISI 50litre Capacity with all necessary fittings.

Providing and fixing Polyvinyl Chloride (PVC) pipes, incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work

75 mm nominal dia .Pipes. Vent pipe

75 mm nominal inner dia .Pipes.

100mm nominal inner dia .Pipes.

Providing and fixing Polyvinyl Chloride (PVC) fittings for pvc pipes

P-Trap

100mm door tee

100 mm bend with door

100 mm bends

100 mm TEE

100 mm Connector

75mm Flow Trap with jali

75mm Door Tee

75mm bend with door

75mm Bend

75mm Connector

75mm Tee

Reducer 100mm x 75mm

Vent Cap 75mm

Provision for electric fitting in rooms inl service line.

MOHAMMAD YOUSUF GANAIE