TN-08/SE-1/2024-25 Lot No-01

Amount

Uprooting jhunds including backfilling & dressing

Cleaning the campus including removing thick bushes & jungle with proper disposal

Earth work in in foundation in dry ordinary soil (loam clay sand) i/c lift up to 1.50M & lead up to 30 M & i/c fillimg ,watering & ramming of excavated earth into the trenches or into the space betwwen the structure & the sides of foundation trenches or into the plinth with removal & disposal of surplus earth as directed by the Engineer Incharge up to a distance of 30M from the foundation trenches.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :-1:3:6 (1 cement : 2 coarse sand (zone-iii) : 4 derived aggregate 20 mm nominal size derived from natural sources)

Demolishing Cement morter Brick Work Manually/by mechanical means including disposal of material within 50M lead as per Direction of Engineer in Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling Door or window and clerestory window (steel or wood) shutters including chaukhat, holfast etc . complete and stacking with 50 meter lead.

Brick work(1:4) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

12 mm thick Cement Plaster in 1:4 cement mortar single coat on rough side of single or half brick wall for interior plastring in single storey building finish even & smooth including all cost of material labour T& P etc for complete work.

Providing and Laying Vitrified tiles for floor in different sizes, (thickness to be specified by the manufacturer )with water absorption, less than .08 percentage and confirming to ISO 15622 of approved make in all colours and shades laid on 20 mm thick cement motor 1:4 ( 1 cement:3 Coarse Sand) , joining with grey cement slurry at the rate 3.3 kg per square metre, including grouting the joints with white cement and matching pigments, etc size of tile 600 X600 mm.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Supply and laying brick ballast (M-150 or over burnt brick ballast) below interlocking tiles as per directed engineer in charge . Including all T&P complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing sal wood work in frames of doors,window and other frames and fixed in position with holefast including cost of materials all fittings,labour t&p etc.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35mm thick shutters

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:With common burnt clay F.P.S. (non modular) brick tiles of class designation Ist class

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, l/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more cost applied 0.90 Itr/10 sqm over an under coat of primer applied 0.75 ltr/10 sqm of approved brand and manufacture

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications , Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm including all cost of materials T&P.

Finishing walls with water proofing cement paint of required shade on new work (Two or more coats applied @ 3.84 kg/10 sqm)

Centring and shuttering of including sturutting , proping,etc and removal form for mass concrete . required for proper completion of work as per direction of Engineer in -charge.

Reinforced Cement concrete with stone grit in R.C.C. M20 work including cost of material but inclusive of labour charge and T&P and also excluding centering, shuttering and reinforcement in 1:1.5:3 FOR 1 M³

Supply and fixing TMT steel bar with Bending, Binding, cutting and placing in position reinforcement including cost of binding wire etc.

Supplying and fixing curtains of approved mark and design with palmet road etc as per directed by engineer in incharge including all materials labour t&p etc.

Providing and fixing steel work in built up tubler(round,square or rectangular hollow tubes etc.) trusses etc. including cutting,hoisting ,fixing in position and applying a priming coat of approved steel primer,including welding and bolting with special shaped washers etc. completed.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Supplying and fixing Solar pannel system of 3 KW. i/c all fictures labour and T&P etc. Comp.(Off Grid Soller Power Plant)

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer

Providing and installation of 1 H.P. submersible pump make(Crompton or equivalent I.S.I mark) i/c cost of all fittings, labour,boring up to 150ft and lowering as required. i/c all charges, electric cable etc complete for proper complition of work.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Painting or Finishing steel work with Epoxy paint(two or more coats)at all locations prepared and applied coat,preparation of surface,etc complete i/c all material, labour, and T&P etc required for proper completion of work.

Providing cowkidar for watch and ward

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively with automatic flushing cistern with standard flush pipe and C.P bras spreaders with brass unions and G.l clarand complete, including painting of fittings and brackets, cutting and making good the walls and floor wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, Including painting of fittings and brackets, cutting and Making good the walles whereever recuireds . White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walles whwerever required 510x1040 mm bowl depth 250 mm.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing brass stop cock of approved quality 20 mm nominal bore

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing U-PVC pipe 110 mm dia working presure 4kg/cm2

Wiring point for light / fan / exhaust fan/ call bell with 1.5 sq. mm.FRLSH PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch, modular plate, suitable G.I Box , and earthing the point with 1.5 sq mm.FRLS PVC insulated copper conductor single core cable etc. as required.

wiring point for Plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid PVC coduict pipe on surface, Complete with 14 SWG copper earth continuity wire GP box,piano type switch and socket etc. complete in all respect.

Providing & fixing 32 A TP & N disconnector fuse switch unit inside the existing panel boardwith ISI marked HRC fuse including drlling holes in cubicle panel,making connections,etc as required.

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/Gl structure of suitable strength with following components complete as required

SINGHWAL INDUSTRIES (BID ID -4972217)

Rakendra kumar mishra (BID ID -4978957)

NARENDRA CONTRACTORS (BID ID -4977719)