E-Tender No. 47/2024-25, EUDC-II Noida

Amount

ADDITIONAL 250KVA T/F AT Nagar Palika Office S/S Dhoom Manikpur

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 15

ST POLE 11MTR

PCC POLE 8.5MTR

STONE PAD

T/F 250KVA

11KV CROSS ARM

11KV PIN INSULATOR

11KV FUSE SET

DROPPER CHANNEL

EARTHING COMPLETE

TOP CHANNEL

DISTRIBUTION BOX

LT PVC CABLE AL 1X400SQMM

LT AB CABLE 3X120SQMM

Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST POLE 11MTR/PCC POLE 8.5MTR

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

FIXING OF STONE PAD COMPLETE WORK IN ALL RESPECT.

FIXING OF MS TOP CHANNEL COMPLETE WORK IN ALL RESPECT.

FIXING OF CROSS ARM AS PER SITE REQUIREMENT.

FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.

FIXING OF PIN INSULATOR WITH PIN AS PER SITE REQUIREMENT.

FIXING OF DISTRIBUTION BOX AS PER SITE REQUIREMENT.

FIXING OF 11KV FUSE SET AS PER SITE REQUIREMENT.

CONNECTING OF LT PVC CABLE ALU. 1X400SQMM AS PER SITE REQUIREMENT.

Installation and Commissioning of 11/0.4 KV, 250 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Laying, Sagging and Re-Sagging of AB Cable 3x120sqmm at different locations of T/F as per site requirement.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

Providing and Fixing of Clamp with Nut Bolt and Washer with complete work in all respect.

Providing and Fixing of Alu. Lugs 400sqmm as per site requirement.

Providing and Fixing of copper bus bar as per site requirement.

Providing and Fixing of Pearcing Clamps per site requirement.

Fabrication of T/F Chair Structure and Chair for 250KVA T/F as per site requirement.

Fabrication of Wiremes Fencing for 250KVA T/F as per site requirement.

Chemical Earthing of BODY AND NEUTRAL OF DISTRIBUTION T/F : Providing of earth elctrode strip in pipe terminal type chemical earthing proper hot deep galvanization dia 50 mm length 3 mtr down conductor size - 32mm x 6mm terminal connection hole dia 8mm The cavity between the strip & pipes is filled with condutive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be zinc coated the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of Pgs backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested to connect the above chemical earthing with the GI strip of size 32 mm x 6 mm suitable for distribution transformer.

ADDITIONAL 100KVA T/F AT Mewatiyan near Adarsh nagar S/S Chithera

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 40 to 57

T/F 100KVA

ST POLE 11MTR

PCC POLE 8.5MTR

STONE PAD

AB CABLE 3X120

WEASEL CONDUCTOR

T OFF CHANNEL

11KV PIN INSULATOR WITH PIN

11KV TOP CHANNEL

11KV DROPPER CHANNEL

S/S BASE ANGLE

STAY SET COMPLETE

LT XLPE 1X240

LT XLPE 1X35

3PHASE DISTRIBUTION BOX

11KV DISC INSULATOR

EARTHING COMPLETE

11KV FUSE SET

Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST POLE 11MTR/PCC POLE 8.5MTR

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

FIXING OF STONE PAD COMPLETE WORK IN ALL RESPECT.

FIXING OF MS TOP CHANNEL COMPLETE WORK IN ALL RESPECT.

FIXING OF S/S BASE ANGLE AS PER SITE REQUIREMENT.

FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.

FIXING OF T OFF CHANNEL AS PER SITE REQUIREMENT.

FIXING OF PIN INSULATOR WITH PIN AS PER SITE REQUIREMENT.

FIXING OF DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.

FIXING OF DISTRIBUTION BOX AS PER SITE REQUIREMENT.

FIXING OF 11KV FUSE SET AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X240QMM AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X35QMM AS PER SITE REQUIREMENT.

Installation and Commissioning of 11/0.4 KV, 100 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Laying, Sagging and Re-Sagging of AB Cable 3x120sqmm at different locations of T/F as per site requirement.

Laying, Sagging and Re-Sagging of WEASEL CONDUCTOR as per site requirement.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

Providing and Fixing of Clamp with Nut Bolt and Washer with complete work in all respect.

Providing and Fixing of Alu. Lugs 35sqmm as per site requirement.

Providing and Fixing of SUSPENSION CLAMP as per site requirement.

Providing and Fixing of NUT BOLTS AND WASHER as per site requirement.

Providing and Fixing of Dead End Clamp as per site requirement.

Providing and Fixing of PEARCING CLAMP per site requirement.

Fixing, tightening & nozzling of stay set complete with wireand stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps with Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

ADDITIONAL 100KVA T/F AT Mahaveer Wala G Vihar S/S Chithera

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 86 to 103

T/F 100KVA

ST POLE 11MTR

PCC POLE 8.5MTR

STONE PAD

AB CABLE 3X95

WEASEL CONDUCTOR

T OFF CHANNEL

11KV PIN INSULATOR WITH PIN

11KV TOP CHANNEL

11KV DROPPER CHANNEL

S/S BASE ANGLE

STAY SET COMPLETE

LT XLPE 1X240

EARTHING COMPLETE

LT XLPE 1X35

3PHASE DISTRIBUTION BOX

11KV DISC INSULATOR

11KV FUSE SET

Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST POLE 11MTR/PCC POLE 8.5MTR

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

FIXING OF STONE PAD COMPLETE WORK IN ALL RESPECT.

FIXING OF MS TOP CHANNEL COMPLETE WORK IN ALL RESPECT.

FIXING OF S/S BASE ANGLE AS PER SITE REQUIREMENT.

FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.

FIXING OF T OFF CHANNEL AS PER SITE REQUIREMENT.

FIXING OF PIN INSULATOR WITH PIN AS PER SITE REQUIREMENT.

FIXING OF DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.

FIXING OF DISTRIBUTION BOX AS PER SITE REQUIREMENT.

FIXING OF 11KV FUSE SET AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X240QMM AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X35QMM AS PER SITE REQUIREMENT.

Installation and Commissioning of 11/0.4 KV, 100 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Laying, Sagging and Re-Sagging of AB Cable 3x95sqmm at different locations of T/F as per site requirement.

Laying, Sagging and Re-Sagging of WEASEL CONDUCTOR as per site requirement.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

Providing and Fixing of Clamp with Nut Bolt and Washer with complete work in all respect.

Providing and Fixing of Alu. Lugs 35sqmm as per site requirement.

Providing and Fixing of SUSPENSION CLAMP as per site requirement.

Providing and Fixing of NUT BOLTS AND WASHER as per site requirement.

Providing and Fixing of Dead End Clamp as per site requirement.

Providing and Fixing of PEARCING CLAMP per site requirement.

Fixing, tightening & nozzling of stay set complete with wireand stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps with Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

ADDITIONAL 100KVA T/F AT Royal Farnicher GT Road S/S Chithera

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 132 to 148

T/F 100KVA

ST POLE 11MTR

PCC POLE 8.5MTR

STONE PAD

LT XLPE 1X35

T OFF CHANNEL

EARTHING COMPLETE

11KV PIN INSULATOR WITH PIN

11KV TOP CHANNEL

11KV DROPPER CHANNEL

S/S BASE ANGLE

STAY SET COMPLETE

11KV FUSE SET

AB CABLE 3X120sqmm

WEASEL CONDUCTOR

LT XLPE 1X240

3PHASE DISTRIBUTION BOX

Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST POLE 11MTR/PCC POLE 8.5MTR

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST POLE 11MTR/PCC POLE 8.5MTR

FIXING OF STONE PAD COMPLETE WORK IN ALL RESPECT.

FIXING OF MS TOP CHANNEL COMPLETE WORK IN ALL RESPECT.

FIXING OF S/S BASE ANGLE AS PER SITE REQUIREMENT.

FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.

FIXING OF T OFF CHANNEL AS PER SITE REQUIREMENT.

FIXING OF PIN INSULATOR WITH PIN AS PER SITE REQUIREMENT.

FIXING OF DISTRIBUTION BOX AS PER SITE REQUIREMENT.

FIXING OF 11KV FUSE SET AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X240QMM AS PER SITE REQUIREMENT.

CONNECTING OF LT XLPE CABLE 1X35QMM AS PER SITE REQUIREMENT.

Installation and Commissioning of 11/0.4 KV, 100 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Laying, Sagging and Re-Sagging of AB Cable 3x120sqmm at different locations of T/F as per site requirement.

Laying, Sagging and Re-Sagging of WEASEL CONDUCTOR as per site requirement.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

Providing and Fixing of Clamp with Nut Bolt and Washer with complete work in all respect.

Providing and Fixing of Alu. Lugs 35sqmm as per site requirement.

Providing and Fixing of SUSPENSION CLAMP as per site requirement.

Providing and Fixing of NUT BOLTS AND WASHER as per site requirement.

Providing and Fixing of Dead End Clamp as per site requirement.

Providing and Fixing of PEARCING CLAMP per site requirement.

Fixing, tightening & nozzling of stay set complete with wireand stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps with Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

AYAAN ENTERPRISES (BID ID -4747052)