WBPWD/SEHEC/SK/NIQ03/18-19/2nd

Amount

Supply, installation, testing & commissioning of Bed cum Passenger lift (26 persons) ( WITH MACHINE ROOM, Simplex system operation), Stainless steel body, V3F control panel with ARD as per following specifications :- (Make – OTIS / SCHINDLER / KONE)

Load kgs. : 1768 kg. (26 persons) Speed : 1.00 mtr. / sec. Travel- Height : Ground floor to 4th floor (G+4) ( 14.60 Mtr Approx) Stop & Opening : 05 stop / 05 opening, all in same side Power supply : 440 Volt, 3 phase 50Hz, AC Control : V3F Microprocessor based with closed loop control Operation : Simplex Full Collective (With / without attendant) Machine : Gearless machine, Permanent Magnet AC Synchronous Motor Hoistway (WxD) available : 2700 mm wide x 2750 mm depth Pit depth : 2000 mm minimum Head room : 4700 mm Machine room height : 2800 mm up to load hook Car size (WxDxH) : 1600 mm wide x 2300 mm deep x 2200 mm height or as per manufacturer's standard specification conforming to IS. Car panels : SS4 Hairline finish Car flooring : Granite Mat finish Car enclosure/ false ceiling : SS4 Hairline finish Fire Rated Door : 60 Mins Traction Media : Flat Coated steel belt with V groove / steel rope Car Entrance : Fully Automatic steel doors in S.S. Hairline finish with telescopic opening to the left or right / Centre opening power door. Car Entrance size (WxH) mm. : 1200 mm x 2000 mm

Hoistway Entrance : Fully automatic steel doors in S.S. Hairline finish with telescopic opening to the left or right / Centre opening power door. Door operation : Automatic & multi-beam full height infra-red detector system Lighting and ventilation in car : Diffused or LED spot light with enough ventilation inside the car Car operating panel : A best quality car operating panel with floor buttons and digital hall position indicators – Seven(7) segment Landing operating panel : Car position digital indicator and direction indicator Buttons on car & landing encoded with braille. Other features : Anti-nuisance car call protection, independent service, Overload sensor and alarm, Nudging, Emergency Fireman's Service, Battery operated Automatic Rescue Device, Battery operated emergency Car light unit, emergency alarm bell, Digital hall position indicator at all landings & Voice announcement system. Landing door should be minimum 1 hr. fire rated. Other Works : Necessary cutting of wall / floor for fixing the Fire Alarm switch, Hall Button switch and also making provision to entry of rope, electric wire etc as required to complete the job.

Charges for dismantling the existing Bed cum Passenger lift (20 persons) including all accessories and deposited the same to the nearest location as per direction of the EIC. After dismantling of doors of each floor the door openings shall be properly sealed to avoid any falling incident

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)