Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.8 CrAdmitted-Finance | -3.82% | ₹1.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.1 CrAdmitted-Finance | +14.51% | ₹2.1 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.8 CrAdmitted-Finance 11TH FLOOR ECO CENTRE BUSINESS TOWER P NO 4 EM BLOCK SECTOR V KOLKATA 91 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | -0.05% | ₹1.8 Cr | L3 | Admitted-Finance |
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
1 Apr 2026, 6:00 pmClosed
Executive Engineer Medical And Health Chittorgarh
Executive Engineer Medical And Health Chittorgarh
2. SITC of HVAC work in Sub District Hospital Bhim, Distt- Rajsamand
2026_MEDIC_547581_2
NIT No 20/2025-26 EXECUTIVE ENGINEER MEDICAL AND HEALTH CHITTORGARH
Open Tender
Electrical Works
240 days
RAJSAMAND
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
RTGS-NEFT TO CANARA BANK AC 3034101004985
₹4.0 L
10 Apr 2026
20 Mar 2026
2 Apr 2026
20 Mar 2026
1 Apr 2026
20 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1AIR CONDITIONING PART-A | |||||
Supply , Installation, Testing and Comissioning of factory assembeled double skin central evaporative cooling plant having specifications as per A, B, C, D, E | - | - | - | - | |
A. Air washer comprising of 2nos Pre-Filters. First filter shall be 50mm thick Aluminium wiremesh filter & second filter shall be 50 mm thick MERV-8 synthetic media filter with efficiency 90 % down to 10 microns. Both filters to be placed over the common frame. | - | - | - | - | |
B. Humidification section comprising of Wet pads 200 mm thick impregnated cellulose paper media ( Celdec pads ) with 2 bend PVC eliminator. The End plates of Pad & Eliminator shall be in SS 304 construction. Also, the inner blank offs of Wet section shall be in SS304 construction. | - | - | - | - | |
C. Fan Section comprising of belt driven, DIDW Backward curved AMCA certified centrifugal fan with maximum air outlet velocity of 10m/s suitable for required cfm at 50 mm static pressure (Total static of the unit shall be verified by the OEM before the design & supply of the units). Fan & Motor should be mounted over Aluminium channel of suitable thickness and should be isolated from the unit's bottom panel by means of Spring isolators. | - | - | - | - | |
D. TEFC High efficiecny IE-3 class motors as required with pulley, belt , Guard | - | - | - | - | |
E. The unit shall be fabricated with frame work hollow extruded aluminium profile with 0.80 mm preplasticised GSS on outside and 0.80mm 275gsm plain GSS on inside complete with 25 mm thick CFC free PUF insulation of minimum 40 kg/cum density sandwiched in between inner and outer skins. Unit should have MS powder coated legs to give height to unit's base channel from the floor surface. SS-304 ( 18 g ) Sump, UPVC Internal piping, make up, drain & quick fill and drain connection, Butterfly/Gate valves for pumps, make up, drain & quick fill and drain connections of sump, 2 no. Vertical Pumps of suitable capacity to be placed inside the unit's housing (external pumps are not acceptable) ,Y strainers and necessary fittings, Concrete Blocks / M S stand, anti vibration pads etc.as required. All as per pre approved by Engineer in charge. | - | - | - | - | |
10000 CFM | - | Each | - | - | |
15000 CFM | - | Each | - | - | |
20000 CFM | - | Each | - | - | |
stage.html
html • 0.03 MB
techsummary_976289.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
Tendernotice_2.pdf
PDF • 0.10 MB
Tendernotice_3.pdf
PDF • 3.23 MB
Tendernotice_4.pdf
PDF • 4.19 MB
corrigendum.pdf
Other Document • 0.21 MB
BOQ_976289.xls
BOQ • 0.55 MB
Download all tender documents and submit your bid