Guard Room at Gate No. 1 of New Prikalp Vihar Colony at Telibagh, Lucknow.(Lot No.45)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm sqm 60.50

Brick work with common burnt clay ( Non Modular) bricks of class 150 in Foundation and plinth in cement mortar 1:4( 1 Cement : 4 Coarse sand)

Brick ballast (b) class 150 brick ballast 40 mm gauge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm (nominal size)

Providing and Laying 12 mm thick cement Plaster 1:4 with cement and coarse sand mortar complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm

Providing fixing 50 mm Core thickness Puf panel use for wall & Roof

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and Fixing Brass 100 mm mortoice latch and lock with 6 levers without pair of handles ( best make of approved quality) for alluminium doors including necessary cutting and making good etc. complete

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm each