Balance work of IPD Block at Reasi by way of Civil Work/ Water Supply and Sanitary installations.

Amount

Earthwork in excavation by mechanical means over areas (exceeding 30 cm in depth , 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 mtr and lift upto 1.5 mtr,disposed earth to be levelled and neatly dressed. ( All kinds of soil )

Centering and shuttering including strutting , propping etc and removal of form

a) suspended floors , roofs , landings , balconies and access platforms.

b) Edges of slab and breaks in floors and walls under 20 cm

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering . .

a) All work using 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) crushed

b) All work using 1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) crushed

Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering and shuttering and reinforcement. Upto floor level V , in walls ( any thickness) including attached pillasters , buttresses, plinth and string courses , fillets , columns, pillars , piers, abutments , posts and struts in 1 :1.5:3 ( 1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ).

Providing & laying reinforced cement concrete( 1:1.5:3 ) with 20 mm nomial size of agg. In suspended floors balconies landings & staircase havings upto 15" excluding cost of centring 7 shuttering all work uptp floor v level

Reinforcement for RCC work incl. straighteninig cutting bending placing in positin & binding complete

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 75 in foundation and plinthin cement mortar 1:6 ( 1 cement :6 coarse sand )

Extra for brickwork in superstructure above plinth level upto floor level V ( by manual means )

Half brick masonry with bricks of class designation 75 in foundation and plinth in cement mortar 1:4( 1 cement : 4 coarse sand )

Extra for half brick masonry in superstructure above plinth level upto floor level V ( by manual means )

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1: 6( 1 cement : 6 fine sand )

Providing and fixing white vitreous china pedestal tupe water closet (European type W.C pan) with seat and lid, 10l low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures, complete including cutting and making good the walls and floors wherever reqd. WC pan with ISI marked white solid plastic seat and lid of make Hindware / Parryware / Cera / Jaguar.

Providing & fixing White vitreous china pedestal for wash basin completely recessed at the back for receptionof pipes & fittings

Providing & fixing short body bib cock with flange of jaquar or equivalent

Providing and fixing wash basin with C.I / M.S brackets, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever reqd. including 15mm C.P brass pillar taps. While vitreous China wash basin size 630 x 450mm with single 15mm C.P brass pillar taps of make Hindware / Parryware / Cera / Jaguar.

Providing& fixing of angle valve of approved brand jaquar or equal

providing & fixing Stainless steel soap dish holder of jquar or equal

Providing & Fixing mirror of superior classs of approved quality and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing rectangular shape 453x357 mm

Provding & fixing of 600x120x5mm glass shelf with edgse around of supported on anodised aluminium angle frame with cp brasss bracket and guard rail fixed complete fixed with 40mmm long screws plugs

P/Fixing of stainlsss steel cp locking grating 100mm

P/Fixing of stainlsss steel cp locking grating hole 100mm

Providing & fixing of stainless steel tower rail 300mm lomg jaqyuar or equal

P/fixing of PVC connection pipe all complete job

P/Fixing of central hole basin mixer with extended casted spot with 450mmm long braided hoses etc all complete

P/Fixing of wall mixer with 3 in 1 system provision with all complete

providing & fixing of cp Nipple extension

P/Fixing of urinal pot of approved brand & manfacture (ceramic urinal pot)

p/Fixing of urinal boardHPL urinal patition for urinal pots

P/Fixing of urinal coupling

p/ fixing of urinal wastepipe etc

P/Fixing of waste pipe 32mm for urinaletc

P/Fixing 32mmm waste coupling etc all complete

P/ Fixing of cp hexa niple 1/2" all cmplete

p/Fixing of urinal push cock for urinal pots (self cleaning pushcock)

P/Fixing urinal spreader

P/Fixing PVC pipes etc all complete

P/Fixing of sewer line of size 6" inch etc all complete

P/Fixing of check valve of size 50mm

P/fixing of valve of size 32mm etc all complete

P/Fixing of T'of size 32mm dia

P/Fixing of filter ball valve of size 1'inch

P/Fixing of pvc bend of required etc all complete size 4'' inch

P/Fixing of pvc T OF required size etc all comp. size 4'' inch

P/Fixing of flow traps etc all complete.

P/Fixing of clamps of size 4' inch

P/Fixing of 5 HP motor etc all complete job

Providing installation and testing of geysor of approved quality and manufacture venus / bajaj or equivalent including all fittings complete.

a) 50 litres capacity

Providing and fixing G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc. Medium of make JINDAL / Prakash Surya

b) 20mm dia G.I Pipe

c) 32mm dia G.I Pipe

d)50mm dia G.I.Pipe

Providing and fixing ball valve (Brass) of approved quality complete as per ISI mark

b) 25mm nominal bore

Providing and fixing GI union in GI pipes including cutting and threading the pipe and making long screws etc complete (new work) of make UNIK.

a) 32mm nominal bore

b) 50mm nominal bore

c)25mm nomial bore

Providing and placing on terrace (at all floor levels) 3 layer polyethylene water storage tank ISI : 1270 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank, sintex, star having valid ISI license

Constructing masonry chamber 90x90x100cm inside with 75 class designation brick work in cement mortar 1:4 (1cement : 4 coarse sand) for sluice valve with CI surface box 100mm top dia 160 mm bottom dia and 180 mm deep inside with chained lid & RCC top slab with 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size), foundation concrete 1:5:10 (1cement : 5 Coarse sand : 10 graded stone aggregate 20mm nominal size, inside plastering 12mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished smooth with floating coat of neat cement on walls and bed concrete etc complete as per design. With F.P.S bricks nallah

Providing and fixing nipple for water tank pipe, fittings of approved quality, colour. Of size 1" inch

Carraige of materials by mechanical transport

sand 21km

Bricks 46 km

aggregate 10km

Note:- China ware items should be of Hindware/ Cera/ Jaquar and C.P. Fittings items should be of Parko/ Jaquar/ Hindware

Electromechanics Engineers And Contractors

M/S MAGOTRA ENGINEERS and CONTRACTOR

Sumit Gupta