GE/U(N)-26/2024-25 REPAIR TO JOINERY, INTERNAL WATER SUPPLY AND CONNECTED WORK AT PB ENCLAVE AND ADJOINING AREA UNDER AGE BR-I OF GE (N) UDHAMPUR

Amount

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MD land all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floor and paving exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as in sunken floor/ foundation, complete all as specified and as directed by Engr-in-Charge. up to G+3 story bldg.

25 mm thick, Plain cement concrete 1:2:4 type B-1 using 20mmmm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Treatment of sunken floor surfaces with 0.488 kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg /Sqm mixed with acrylic based polymer based modified cementitious composite compound @0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours, including taking down old/existing treatment with wire brushing and clearing the dust and foreign material before new treatment and including one GI light grade 450mm long 32 mm dia Spout to each sunken floor, complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (un reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and as directed by Engr-in-Charge.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm and will be finished and rendered with 10mm thick cement plaster in Cement Mortor 1:3 using water proofing compound and finished even and smooth without using extra cement and the sand used for the same will be clean and free from any silt, organic matter and impurities, RCC and plastered surface will be wet cured for minimum period laid down in IS 456 & then allowed to dry and leakage checked by pointed test at least 72 hrs. After checking of leakages on dry plaster surfaces.

M&L for apply bituminous primer confirming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrane will be 3 kg/Sqm. APP membrane will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrane apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

M&L for 20mm thick precast machine pressed factory made PCC tiles as in 1:2:4, type B-0, 300x300mm size and 20mm thickness with grey cement & No pigment on bedding layer of 15mm thick cement mortor 1:4 mixed with 5% creosote oil, joined & pointed flush in cement mortar 1:3 as specified and directed by Engr-in-Charge.

Removing any kind of debris/Demolished building material outside A-1 Def land including loading in truck and conveying day to day basis to beyond the lead included in the rates, including loading, unloading and stacking at the destination approved dumping point etc. complete. With all lifts and lead outside MD Land 1 to 2 Km distance, complete all as specified and directed by Engr-in-Charge.

Preparation of new or previously untreated surface of any description exc 10cm width or girth and applying two coats of aluminium paint over a coat of primer complete all as specified and directed.

Demolition Stone slabs and tiles laid dry or dry bedded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer in charge

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cells, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down chowkats or frames with shutters(without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n/exc 2 Sqm each complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.

Dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and as directed.

Dismantling water tanks of 500 ltrs and removing to store, complete all as specified and as directed.

Dismantling floor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and as directed.

Brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Rendering 15mm thick in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work or concrete surfaces, in cm 1:4 finished even and smooth w/o using extra cement incl upto a height of (G+3) complete all as specified and directed.

Rendering 10mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement, complete all as specified and as directed.

Rendering 5 mm thick plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

Coloured vitrified (double charged) tiles 10mm thick (square) polished, area of each tiles n.exc 0.36Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screed bed in CM (1:4) complete all as specified and as directed.

All as per srl item above but as in skirting to match over and including10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

Glazed ceramic coloured tiles 450mmx300mmx6 to 7mm thick, sharp edged (joint free), in vertical surfaces such as walls, skirting etc, set to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

All as per Serial Item above here-in-before but in renewing tiles in patches, area n exc 5 sqm. including removing old tiles, preparing new plasted surface as in CM 1:4, jointing, pointing & providing new tiles, complete all as specified and as directed.

M & L for opening existing wall & Floor joints and filling/ Seal with Silicon sealent (at Vertical & Horizontal Joints), complete all as directed by Engr-in-charge.

50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth without using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.

S&F in repair 18mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc, complete all as specified and directed.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electro galvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed.

S&F in repair Stainless steel luddle-craddle hanging stand for cutlery all as specified and directed by Engr-in-charge for modular kitchen, complete all as specified and directed.

Fixing only existing stainless steel multipurpose brackets in wooden/drawer/partitions for storing rations of various type, complete all as specified and directed by the Engr-in-charge.

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed. Make-Rajshree Doors or equivalent as approved by GE.

Factory Made Solid PVC Moulded Door Shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. Make: Rajshree Doors or equivalent as approved by GE.

Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Pressed steel frames 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

35mm thick factory made flush shutters, solid core constructions, with block board, core and plywood face panel, commercial plywood on both sides, complete all as specified and directed.

35mm thick 2nd class hard wood glazed and Skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.24 (a), complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed, complete all as specified and as directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel towel bolts of extruded section and fixed, complete all as specified and as directed.

All as per description of Ser item No. above but 125 mm Size, complete all as specified and as directed.

S&F aluminium alloy sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and as directed.

S&F floor door stopper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and as directed.

S&F in repairs aluminium alloy sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and as dircted.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and as directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding, complete all as specified and as directed.

S&F in repair floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S&F in repairs mild steel powder coated or chromium plated peg sets of six pegs of standard quality as approved by Engr-in-charge and fixed etc, complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gut ties etc, complete all as specified and as dircted. Make:- Prayag or equivalent

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or welded to steel frames with welding/fitted with screws etc, complete all as specified and as directed.

S&F in repairs magic eye to main doors including necessary fixing arrangements etc, complete all as specified and as directed.

S& F in repairs fancy type MS curtain rods powder coated 25 mm dia with end fittings and fixing brackets of required size ( two nos end brackets and two Nos wall brackets fixed with wooden gut ties and screws, complete all as specified and as directed.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and as directed.

Vitreous china wash down water closet (pedestal pattern), suitable for P or S trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

Plastic water closet seat, closet pattern with flat button and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

Vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as per specified. (Fixed in Repair)

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc., fixed in repairs, complete all as specified and directed.

Vitreous china, white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified.

S&F ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm bore (minimum weight 142 gms ) including fixing of socket if required and taking out old UNSV existing ball valves, complete all as specified and as directed.

S&F ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm bore including fixing of socket if required and taking out old UNSV existing ball valves, complete all as specified and as directed.

CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineer-in-Charge.

20mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges Fixed in repair complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Corner Glass self (With CP brackets), as in repairs complete all as specified and as directed.

Single lever wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE.

Hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.

Shower rose, brass, chromium plated, 100 x 100mm Square with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed I repair complete all as specified and as directed.

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed.

CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

Sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with lugs, washers and wastes: including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting upon to pipe overall size 915mm x 460mm bowl size 410mm 330mm x 160mm, fixed in repair complete all as specified and as directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with' long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity (Tripple layer) white in colour including water tank cover (internally /interlocking arrangement for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltrs capacity (Tripple layer) white in colour including water tank cover (internally /interlocking arrangement for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).

Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and making good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.

Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete, all as specified and directed.

Complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

Preparation of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.

Complete removing existing treatment including scraping, removing all mud, cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade weather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

Preparation of old painted steel and iron surfaces exc 10cms width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

S&F false ceiling with fibre cement designer tile ivory painted( high pressure steam cured) of 4mm thickness ( as per IS: 14862) of size 595 x 595 mm and any one of the design (oceanic, lake & hillm casade or Electra) I true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120gms, both side inclusive) consisting of Main T runner with suitable spaced joints to get required length, and 15x32mm made of 0.30mm sheet, and cross 'T' at 600mm c/c to form a grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detector etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlins etc with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T section shall be centra black pre painted with polyester paint, and having a load bearing capacity of 12kg/sqm, and re-fixed all existing electric wiring and fixture all as complete at all heights as per directions of Engr-in-charge.

S&F 5mm thick (HL series) insulated PVC wall lining honeycombed consisting of PVC insulated panedls ( as per approved by GE) with approved design & pattern duly fitted into the wall including PVC angle jointers, u jointers, beading etc as required at the edges including removing and re-fixing electric boards & plated and covered with PVC strips or beading after fixing wall paneling, complete all as specified and directed by Engr-in-charge.

Rolled mild steel section of angle, tee, flats, and plates as in roof trusses, purlines, rails, etc and the like fixed with angle cleats and connecting plates including welding, Gde FE-410-0 or FE-250-0 all as specified and directed .

Preparation of new or previously untreated steel surface of any description exc 10cm with or girth an applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall or with L-type or J-type or cranked hook bolts in lieu of screw, complete all as specified and as directed by Engr-in-charge.

TULSI RAINA AND SONS

anil construction co.

M/S PARDEEP KUMAR