Restoration of rain damages of LWSS to REC

Brick work using common burnt clay building bricks in super structures in foundation, super structure & plinth level upto floor two level in cement mortar 1:4(1cement:46sand) 2nd class brick complete in all respect to the entire satisfaction of Engineer in Charge

15mm thick cement plaster in single coat on the rough side of brick/concrete /stone walls etc. interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3(1cement:3sand) in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Removing white wash or colour wash by steel wire brushing and /or scrapping sand papering and pareparing the wall surface smooth inlcuding necessary repair to scratches complete in all leads and lifts.

Distempering (two coats) apex ultima on exterior wall of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer ofapproved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer

Painting two coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With white enemal paint

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge.

Providing and fixing 25mm thick panelled glazed or panelled glazed shutter for cup board etc 2nd class Kail wood (detail of cost for a shutter for door half panelled and half glazed)complete in all respect.

Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size )laid in one layer finished with a floating coat of neat cement in 40mm thick in all leads and lifts.

Providing horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump of Kirloskar/KSB/ Cormpton/Lubi or equivalent make as per BIS-1520-1980 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting raw water for under mentioned characteristics with Bronze. impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage drip proof induction motor of standard make such as Kirloskar/Crompton/NGEF and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 15% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments Discahrge (Q) : -7.87 LPS Dia of Rising main :- 125 mm Total head : 185.70 Mtr Length of pipe :-1920 Rmt