Loading
Loading…
Loading…
Tender Value
₹2.5 Cr
EMD Value
₹5.0 L
Closing Date
13 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS.2
18 conditions · 6 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N- Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing 1.1.1 not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from 1.1.2 Govt/Semi-Govt Organizations (b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
Note: Separate completed works of minimum required values for each 1.1.3 component can also be considered for fulfilment of technical eligibility criteria.
Defination of Similar Work :- Any P-Way work involving TLE/PQRS/QRS
71 conditions · 27 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender form (First Sheet) as per 'Annexure-I' of Standard Tender Document.
Firm details as per 'Annexure-II' of Standard Tender Document.
Self attested copy of Permanent Account Number (PAN) issued by Income Tax Department.
For Sole Proprietorship firm submit details as per given below :-
Sole Proprietorship firm attached Affidavit as per 'Annexure -X' of Standard Tender Document.
Special power of Attorney as per proforma given in 'Annexure XI' of Standard Tender Document to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself)
(A) i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
(ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Partnership firm submit details as per given below :-
Self/Notary attested copies of Partnership deed.
Special Power of Attorney as per proforma given in 'Annexure- XII' of Standard Tender Document to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
An undertaking that the Partnership firm is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For JV firm submit details as per given below :-
Memorandum of Understanding of JV as per proforma given in 'Annexure-XIV' of Standard Tender Document.
Letter of consent as per proforma given in 'Annexure-XV' of Standard Tender Document to be submitted by a partnership firm participating as a Member of JV firm (wherever applicable).
Notary Certified copy of resolution passed by Board of Directors of the Company,permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per 'Annexure-XVI' of Standard Tender Document.
Special Power of Attorney as per proforma given in 'Annexure- XVII' of Standard Tender Document to be submitted by Limited Companies or Sole Proprietor participating as member of JV firm (wherever applicable).
Registered Society & Registered Trust: The tenderer shall submit
(i) a copy of the Certificate of Registration
(ii) a copy of Deed of Formation
(iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.
An undertaking that the Registered Society & Registered Trust is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender:
(i)A copy of LLP Agreement
(ii)A copy of Certificate of Incorporation
(iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.
(iv)An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
(e)Company registered under Companies Act 2013:
(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company
(ii)A copy of Certificate of Incorporation
(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
(iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per Clause 46A.1., Part II of GCC-2022 and Advance correction slip No.1: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs.2 crore. Provided further that, in a contract where PVC is applicable, following shall be outside the purview of price adjustments (i.e., shall be excluded from the gross value of the work for the Purpose of price variation): a) Materials supplied by Railway to the Contractors, either free or at fixed rate; b) Any extra item(s) included in subsequent variation falling outside the purview of the Bill(s) of Quantities of tender, under clause 39. (I) (b) of these Standard General Conditions, unless applicability of PVC and 'Base Month' has been specially agreed, while fixing the rates of such extra item(s)'
Any Conditional offer will be summarily rejected.
In case of any difficulty, help desk available on the website of IREPS may be approached.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
All the tenderers/Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through ONLINE payment modes available on IREPS portal line net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts,FDR etc. are not allowed.
Payment of Earnest Money deposit (EMD) and Tender Document Cost (TDC), in respect of E-Tendering, should be accepted through net banking or payment gateway only.
Note for Commercial compliance :-
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Due to roll out of GST with effect from 01.07.2017. The following additional terms and special condition are given below :-
For the tenders due to open before roll out of GST- All the bidders/tenderers while quoting the rates should clearly indicate the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under Statutory Variation Clause.
For the tenders opening after roll out of GST- All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Tender will be opened at the specified time and date. In case the specified date is declared a holiday, the tender would be opened at the same time on the next working day.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway,make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tender, the contract shall be terminated, Earnest Money Deposit (EMD), Performance Guarantee (PG) and Security Deposit(SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
In partial modification to Railway Board's letter No. 2007/CE.1/CT/18 dated 05.07.2010 and 14.09.2017, it has been decided to extend the scope of PMC services for all works contracts costing more than Rs. 10 Crore in open line.
New Cooch Behar - New Bongaigaon Jn (DN) - TSR (P) - 13.100 Tkm.
30-AP-II-2026~NFR
30-AP-II-2026
Open
Works - General
12 Months
Alipurduar, West Bengal
₹0
₹5.0 L
21 Sept 2026
21 Sept 2026
29 Sept 2026
46 items across 1 schedule · ₹2,26,01,221.45 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in- charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 87.00 | 58.97 | 5,130.39 |
| 2 | Under Traffic Block Conditions | Set | 10.00 | 8,394.71 | 83,947.1 |
| 3 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 13100.00 | 29.56 | 3,87,236 |
| 4 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded j o i n t , painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. | Each | 175.00 | 1,851.75 | 3,24,056.25 |
| 5 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 26200.00 | 154.78 | 40,55,236 |
| 6 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 13100.00 | 119.06 | 15,59,686 |
| 7 | For rail panel more than 40 metre length | TRM | 13100.00 | 48.74 | 6,38,494 |
| 8 | Without Rail tensor | TRM | 13100.00 | 50.06 | 6,55,786 |
| 9 | For 60 Kg Rails | RM | 26200.00 | 78.99 | 20,69,538 |
| 10 | PQRS: Pre Block activity: Removing of the existing ballast from crib portion of the full length of existing PSC sleeper and further up to the bottom of sleepers to accommodate new sleeper and dumping the ballast so removed on the shoulders/cess with contractor own labour, tools and plants etc, complete with all lead and lift and as directed by the Engineer-in-charge at site including crossing of track wherever necessary. | TRM | 13100.00 | 36.39 | 4,76,709 |
| 11 | PQRS: During line block activity: Dismantling existing track, levelling disturbed and uneven surface of bed up to bottom of sleeper, Loading the released panels in to BFR with Railway's portal cranes, Placing new panels from BFRs on to track with Railway's portal crane, Linking of Track with all fittings, placing ballast as required in crib and shoulders, aligning and surfacing of track, attending track parameters and initial packing to track to allow traffic at restricted speed of 20 kmph with contractor's labour, tools etc, complete and lead & lift as directed by the Engineer-in-charge at site including crossing of track wherever necessary. Note: The PQRS cranes with fuel and operators will be provided by Railway. | TRM | 13100.00 | 46.27 | 6,06,137 |
| 12 | PQRS: Post Block activity, Pulling back the left over ballast from shoulders/cess in to track and dumping in cribs and shoulders, regulating and boxing with available ballast to facilitate surfacing of track during lifting with contractors own labour, tools etc, complete and lead & lift as directed by the Engineer-in-charge at site including crossing of track wherever necessary. | TRM | 13100.00 | 24.43 | 3,20,033 |
| 13 | Providing group of 2 men for doing various miscellaneous works for Railway's PQRS cranes (one set of 2 portals) for proper upkeep of crew rest van / rest room, as directed by the machine in-charge by : (1) Fuelling the machine, duly bringing diesel / hydraulic oil from the stacked drums; (2) Bringing water to the staff rest van or staff rest room, cleaning rest van / rest room, cooking food for Track Machine staff or bringing food from outside (cost of food shall be borne by the staff concerned). | Day | 60.00 | 1,568.06 | 94,083.6 |
| 14 | Guarding and watching the Track machine / group of machines, spare parts, oils, grease etc. of PQRS cranes (one set of 2 portals) during day and night time in a shift of 12 hours each, at all locations wherever necessary, as instructed by the machine in-charge. Note: One shift comprises of 12 hours. | Shift | 60.00 | 884.38 | 53,062.8 |
| 15 | Laying of auxiliary track with all types of rails, already available on cess, fixing rails on wooden blocks / CST-9 pots at 2m interval, true to square, to required alignment & level, fixing with spikes / screws / keys, linking rails with fish plates, bolts & nuts to a gauge of 3400mm (with reference to centre line of existing BG track), levelling both the rails to same plane as that of BG track over stone ballast by way of removing ballast from shoulders of existing track, providing one round of packing. Subsequently, dismantling auxiliary track after completion of PQRS work at site by way of removing wooden blocks / CST-9 pots and carrying same to next stretch / location, if required, where auxiliary track has to be laid and spreading the same at required locations and leaving rails there itself for carrying out TRR work later. | TRM | 13400.00 | 49.4 | 6,61,960 |
| 16 | For rails above 40m length | TRM | 13100.00 | 122.31 | 16,02,261 |
| 17 | Through Rail renewal with free service rails of all types by removing existing running rails, already cut into free rails / rail panels for making auxiliary track, including attending alignment, cross level, gauging, packing; wherever required including crossing of track, as directed. | TRM | 13100.00 | 129.67 | 16,98,677 |
| 18 | For day time block working | TRM | 26200.00 | 21.32 | 5,58,584 |
| 19 | For night time block working | TRM | 13100.00 | 23.9 | 3,13,090 |
| 20 | Level crossing with CC block surface | Sqm | 200.00 | 370.84 | 74,168 |
| 21 | Removing and refixing of guard Rails over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. | TRM | 150.00 | 117.91 | 17,686.5 |
| 22 | Carrying out ancillary works required for UTV working under line block i.e., turning of rails/ Sleepers and keeping in position for fixing of UTV clamps to rail, keeping rails/PSC Sleepers in position while loading into BFR, removal of clamps on BFR for releasing loaded rail/Sleepers, adjusting of rails/Sleepers on BFR etc. by providing minimum of three men in a shift of 8 hours, with all contractor's tools, all lead, lift, crossing of tracks etc., complete and as directed by the engineer - in - charge. Note: In case, contractor provides less no. of Labour, payment will be deducted for each such person @ 2/3 rd of the accepted item rate. | Shift | 60.00 | 2,579.95 | 1,54,797 |
| 23 | CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 W) | Night | 45.00 | 5,431.83 | 2,44,432.35 |
| 24 | 60 Kg - 110/90 UTS - Outside Track | Each | 410.00 | 325.45 | 1,33,434.5 |
| 25 | 52 Kg - 90 UTS - Outside Track | Each | 540.00 | 300.22 | 1,62,118.8 |
| 26 | 60 Kg - 110/90 UTS - On Running Line | Each | 540.00 | 412.7 | 2,22,858 |
| 27 | 52 Kg - 90 UTS- On Running Line | Each | 100.00 | 334.53 | 33,453 |
| 28 | Outside Track | Each | 810.00 | 63.07 | 51,086.7 |
| 29 | On Running Line | Each | 540.00 | 81.15 | 43,821 |
| 30 | In Wagon where mechanical handling is possible a n d traffic block is not required or in Truck / trailer | MT | 2000.00 | 138.1 | 2,76,200 |
| 31 | For lead up to 500 metres | MT | 2000.00 | 335.54 | 6,71,080 |
| 32 | For lead beyond 500 metre and up to 1 Km | MT | 600.00 | 498.05 | 2,98,830 |
| 33 | Lead beyond 10 Km and up to 20 km | MT | 67.09 | 292.73 | 19,639.26 |
| 34 | Lead beyond 20 Km and up to 30 km | MT | 134.18 | 367.37 | 49,293.71 |
| 35 | Lead beyond 10 Km and up to 20 km | MT | 1000.00 | 163.17 | 1,63,170 |
| 36 | Lead beyond 20 Km and up to 30 km | MT | 2000.00 | 237.81 | 4,75,620 |
| 37 | From Truck / Trailer | MT | 7785.05 | 120.97 | 9,41,757.5 |
| 38 | All type of PSC sleepers | MT | 1634.29 | 489.56 | 8,00,083.01 |
| 39 | P.Way fittings of all types and other similar loose items | MT | 120.76 | 435.2 | 52,554.75 |
| 40 | Opening of level crossing up to required width from centre line of track for replacement of sleepers by digging of pucca road surface up to bottom of sleeper, removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris, replacing the required sleeper duly packing the sleeper to make fit for normal traffic and closing of LC surface with screened ballast to original level by proper ramming and consolidation to smooth motarable surface as directed by engineer in-charge. | Sqm | 200.00 | 412.99 | 82,598 |
| 41 | Dismantling existing check rail of Level Crossing, blocks, bolts & nuts and stacking these in a countable manner near LC, free from any infringements as directed by Engineer in-charge. | RM | 72.00 | 203.28 | 14,636.16 |
| 42 | Fixing check rails to running rails on level crossings with MS brackets, MS packing plates, bolts & nuts, spring washers etc. including lubrication as per approved drawing & specifications, as directed. Rails, MS brackets, packing plates, bolts & nuts, spring washers will be supplied by Railways. Note: One set consists two check Rails. | Set | 5.00 | 5,638.07 | 28,190.35 |
| 43 | Painting of running rails and check rails of any rail section of level crossing with anti-corrosive paint on both sides of web, foot etc. including liner contact area (excluding bottom of foot) and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including painting of liners, ERC surface preparation, i.e. cleaning with wire brush / sand paper as a complete job as per Para No 613 (2)(b)(iii) of Indian Railways Permanent Way Manual, as directed by Engineer in-Charge. | RM | 144.00 | 63.38 | 9,126.72 |
| 44 | 120mm thick blocks of M-40 grade for heavy traffic. | Sqm | 500.00 | 1,887.83 | 9,43,915 |
| 45 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 200.00 | 827.84 | 1,65,568 |
| 46 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 200.00 | 1,536.98 | 3,07,396 |
| Schedule total | ₹2,26,01,221.45 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
STD.pdf
ATTACHMENT
NIT30-AP-II-2026.pdf
ATTACHMENT
NewGCC2022_compressed.pdf
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf GCC 2022 correction slip 1 to 11
ATTACHMENT
AdvanceCorrectionSlipNO.12_compressed.pdf GCC 2022 correction slip 12
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
EPFMPAct.pdf
ATTACHMENT
PVC2025.pdf
ATTACHMENT
BG.pdf
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipNO.12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .