PROVN OF INTERLOCKING TILES IN FRONT OF REAR WAREHOUSE AND BARRICADING OPEN WALL AND REPLACEMENT OF TILES TO GRANITE FLOORING IN CGASD GOA AND PROVN OF ALLIED WORKS AT CGAIS GOA

Amount

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each w/o taking of shutters from the frame and removing to store all as directed.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as directed.

Demolition for RCC chajja including shifting out debris all as directed.

Taking down chowkat window or frames n exc 1.5 sqm each (w/o taking of shutters from the frame all as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar.

M&L for sand filling under floor or in foundation including watering and consolidation all as directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges all as directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in copings including formwork all as directed.

M&L for Cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as directed.

Cement concrete (1:3:6) type C2 using 40mm graded aggregate 100mm thick as in sub base all as directed.

M&L for pre cast cement concrete solid block masonary in CM(1:6) using solid blocks of PCC (1:3:6) type C1 using 20mm graded stone aggregate all as directed.

M&L for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as directed.

M&L for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as directed.

S&F butt hinges medium weight stainless steel 100mm size all as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of size 150mm all as directd.

S/F 125 mm Aluminium handles of size 125mm, cast type, anodised all as directed.

S&F Floor door stopper of size 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, all as directed.

S&F Door closer hydraulically regulated, aluminium extruded body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as directed.

M&L for Aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and directed.(Minimum powder coating 50 Micron)

M&L for Aluminium powder coated window and ventilator shutters, sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing. complete shall as specified and directed.(Minimum powder coating 50 Micron) Jindal Section

S&F Anodised aluminium snap grid frame work for false ceiling and hangers 6mm dia G.I. (Up to 1200mm length) SI 10095 adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified

M&L for Non asbestos fibre cement building board of 8mm thick fixed or laid/inserted to timber/GI/Aluminium framework with screws in ceiling flat or sloping

M & L for 12 mm thick both sides prelaminated Particle board,interior grade, fixed with screws to frame work in, partitions, shelves etc all as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size moulded in rubber mould and with glossy finish confirming to IS 15658-2006 of 80mm thick, M-40 Grade with grey cement and pigments.

M/L for rendering 15 mm thick in CM (1:6) on concrete solid block wall internal surface finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 10mm thick in cement plaster in CM (1:3) on stone masonry surface or surfaces other than fair faces of brick work as in backing coat to receive tiles all as specified and directed.

M&L for screed bed or bedding layer of morter 20 mm thick in CM (1:4) for laying floor, finished to receive floor tiles.

M&L for Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity cylindrical vertical with closed top hoisted and fixed in position all as specified and directed.

M&L for Preparing new plastered wall surfaces and applying two coats of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall all as specified and directed.

S&F 15mm dia fancy type Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105 gms)

S&F 5.5mm thick sheetglass ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane all as directed.

S&F Solar control film 50 micron thick reflective type (gareware sun control or equivalent) all as directed

S&F Stop valve of 15mm bore dia of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms)

S&F PVC connections 15mm size with PTMT nuts of length 600 mm.

Fixed and repair Ball valves of dia 40 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and diercted.

M&L for Preparation of new plastered surface and applying two coats of weather proof high glow antifungal paint on external surface with suitable primer all as directed.

M&L for Sub main wiring with single core 1.5 Sqmm (nominal area) with FRLS PVC insulated multistranded copper conductor, unsheathed 1100 volts grade drawing through PVC casing caping ISI marked medium grade including FRLS 1.5 sqm PVC insulated and unsheathed copper conductor cable as earth wire connected to common earth and dolly complete all as specified and directed.

S & F MCB DB 4 ways, double door type, 230 volts single phase, 50Hz and giving all incoming and out going electric connections and testing complete

S & F MCB series SPN 40 Amps 240, Volts AC

S & F Switch socket combination 5 Amps 2 in 1 pin flush type

S & F MCB series SP 32 Amps, 240 Volts,AC

S & F wall mounting fans 230 volts single phase oscillating 450mm sweep, Airboll Hi-Speed Wall Fan, suitable for wall mounting complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls all as specified and directed by Eingineer-in-charge.

M & L for point wiring complete with 1100 volt, grade PVC insulated unsheathed multistranded 1.5 Sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit medium grade of size 25/20mm, etc fixed on wall/ceiling including provision of 1.5 Sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switched sockets etc concealed on wall complete all as specified and directed. (a) One light point controlled by one switch

M & L for switch piano flush type 5 Amps single pole one way

S & F ceiling rose surface bakelite 65 x 50mm two or three terminals

S & F 45 W 2 x 2 CRCA LED deep drawn panel recess mounting luminaire suitable for armstrong / grid/ Pop ceiling complete with separate electronic driver & high brighteness SMD Leds complete all as specified and directed by Engineer-in-Charge.

S & F GI tube 25mm bore size medium grade with all fittings fixed on wall including clamps, nuts and bolts complete all as specified and directed by Engineer-in-Charge.

S & F gun metal gate valve size 25mm with iron head wheel screwed both ends for iron pipe, fixed in repairs with ISI mark complete all as specified and directed by Engineer-in-Charge.

M/S Kartik Enterprises

SLB Enterprises

Suraj Sukhdev More