Repairs to Chajja Facia Plastering Flooring sanitary fittings tilling and related civil works at AF Stn Singarsi Under AGE I AF Singarsi

Amount

Taking down old cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material areacomplete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick surface / stone masonary finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 10mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L Preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc complete all as specified and directed by Engr-in-Charge..

M&L 75mm plain cement concrete type B-1, 1:2:4(using 20 mm graded stone aggregate) as in hard standing etc complete all as specified and directed by Engr-in-Charge.

M&L 25 mm thick cement concrete type B-0 , 1:2:4 ( 12.5 mm graded aggregate ) as in sub floors (leveling course) complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete 40mm thick in 1:2:4 type B-1 (20 mm graded aggregate) as in flooring finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of ceiling complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls complete all as specified and directed by Engineer-in-Charge.

M&L prepration of old painted surface of external projection facia/ Chajjas and Roof surfaces including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes and cracks with birla white putty and brooming to remove all dirt etc applying one coats of wheather proof paint exterior grade including all scaffolding arrangement complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracks and making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge.

M&L Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc complete all as specified and directed by Engineer-in-Charge.

M&L preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water complete all as specified and directed..

M&L preparing old decorated plastered or un-plastered surfaces of celling, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water complete all as specified and directed.

M&L for two coat of destempering 1st quality acrylic distemper (Ready mixed) having VOC content less than 50 gms/liter of approved manufacturer of required shade and colour complete all as per manufacturerer instruction over a coat Birla White Wall Care Putty ( thickness as required at site to make the surface even and smooth) on prepared wall/celling over prepared surface of wall/celling complete all as specified and as per manufacturer’s instruction complete all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed.

S&F Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

S&F Aluminium powder coated decorative type 25mm dia curtain rod fixing with brackets complete all as specified and directed by Engr-in-Charge.

S&F Aluminium powder coated decorative curtain rod bracket and holder for fixing curtain rod complete all as specified and directed by Engr-in-Charge.

S&F in repair towel rail 18 inches Make ESSCO ( Make ESSCO cat.part no. AEC 1111B) or equivalent as approved by engr in charge .

Material and labour for 7 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. and Fixed with L-type or J-type or cranked hook bolts including dismantling of existing sheet complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge

M&L Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic coloured designer seamless tiles 350x250x7mm/450X350X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for cutting chases for concealed water tubing in stone wall or concrete block wall or concrete slab or wall etc and making good cutting to facing where required and pointing in cement mortar 1:3 ,cutting exc. 10cm in width but not exc 20cm girth complete all as specified and directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store of 25 mm dia complete all as specified and directed.

Ditto as per srl item No 37 above but 20 mm dia complete all as specified and directed.

Ditto as per srl item No 37 above but 15 mm dia complete all as specified and directed.

S/F water tubing, medium grade, galvanized, with all fittings fixed to wall of 25 mm dia complete all as specified and directed.

Ditto as per srl item No 40 above but 20 mm dia complete all as specified and directed.

Ditto as per srl item No 40 above but 15 mm dia complete all as specified and directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing (against Item No 39) complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long, fancy type chromium plated angle valve of 15mm bore dia complete all as specified and directed by Engineer-in-Charge. (Make: Parryware /Slimline / Hindware )

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous china wash hand basin white ,flat back of size 550x400mm with pedestal including PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore, and taking down unserviceable wash hand basin complete all as specified and directed by Engr-in-charge.

S&F Pillar tap fancy type chromium plated with capstan head,screwed down high pressure with long screwed shanks and fly nuts,screwed for iron pipes 15 mm bore dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china urinals,half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal of PTMT any colour for fixing with 15mm dia pipe spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower rose 125mm size and 9" long with or without swivel joints any size, including fixing to steel pipe or union fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed by Engineer-in-Charge..

S&F in repair Angle valve cast copper chromium plated alloy15mm dia, screwed down, high pressure capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup complete all as specified and directed by Engineer-in-Charge.

S&F Tubular towel rail, 20mm dia, D type , 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge.

S&F Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed by Engineer-in-Charge.

PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

Taking down PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors or fixed on wall all as specified and directed by Engr-in-Charge.

Taking down PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors or fixed on wall all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, fixed to walls all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, fixed to walls all as specified and directed.

S&F PVC (SWR) 110mm dia bend any raius all as specified and directed.

S&F PVC (SWR) 75mm dia bend any raius all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore of pipes

S&F 110mm PVC (SWR) WC connector with lip ring all as specified and directed.

Demolition of brick/stone/boulder masonry, built in cement mortar including all quoins,arches,pillars,etc,but exceeding ashlar facings,dressed stone work and precast concrete complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M/S SINGH ENTERPRISE

M/S ASHA ENTERPRISE

P .BANERJEE AND CO

DANATION CONSTRUCTIONS

M/S KUMAR AVINASH

M/S New Builders Corporation

LALAN SHARMA