Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹36.0 L+₹84,320.95 (2.40%)Rejected-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹36.3 L+₹1.1 L (3.24%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹36.6 L+₹1.5 L (4.25%)Rejected-AOC H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹37.4 L+₹2.2 L (6.37%)Rejected-AOC 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L5 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
REPAIRS TO ROOF PLASTERING AND PLINTH PROTECTION IN CERTAIN BUILDINGS IN ZONE D AREA UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD
2023_MES_604677_1
8683
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹80,000
Yes
21 Sept 2023
21 Jun 2023
22 Jul 2023
21 Jun 2023
20 Jul 2023
6 Jul 2023
Amount
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc., complete all as specified and as directed.
Dismantling of wrought iron or MS works of any description such as chajja etc., including necessary straightening of bends complete all as specified and directed.
M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A and complete all as specified and directed.
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc., complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping (SD) screws complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed.
M&L for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed.
Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar complete all as specified and as directed.
Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc., complete all as specified and as directed.
Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.
Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc., under 40 Sqcm in section complete all as specified and as directed.
Dismantling timber Scantling framed work 40 Sqcm and over in section, in any position complete all as specified and as directed.
M&L for Second class hard-wood Clean sawn in scantlings in timber framed for rafter and purlin in roof etc., complete all as specified and directed.
All as per item No 14 here-in-before, but except wood complete all as specified and directed.
S&F CGI sheeting 0.63 mm thick with two corrugation side lap fixed with L or J type bolts in roof walls etc., with grade of zinc coating 275 gm/sqm complete all as specified and as directed.
All as per item No. 16 here-in-before, but except sheets complete all as specified and directed.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with L or J type bolt, grade of zinc coating 275 gm/sqm complete all as specified and as directed.
M&L for second class hard wood (Salwood) clean sawn battens sectional area exc 5 Sqcm and n exc 15 Sqcm at 30cm spacing complete all as specified and as directed.
M&L for 2nd class hard wood scantlings square or rectangular in section exc 13 Sqcm & n.exc 25 Sqcm clean sawn of size 50mmx50 mm used as rafter and purlin and fixed to CGI Sheet with self tapping screws complete all as specified and as directed.
All as per item 20 above, but fixing only scantlings obtained from dismantling complete all as specified and as directed.
M&L for mangalore pattern roof tiles inter locking at side and joints laid dry complete all as specified and as directed.
All as per item No. 22 here-in-before, but except tile complete all as specified and directed.
M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.
All as per item No. 24 here-in-before but except Ridge or hip tile complete all as specified and directed.
M&L for Filleting in any position and any shape in cement mortar 1:4 sectional area exc 25 Sqcm but n. exc 50 Sqcm complete all as specified and as directed.
M&L for Preparing surfaces of new wooden battens of any description or girth and applying two coats of creosote oil complete all as specified and directed.
Dismantling of AC Corrugated or semi corrugated in sheets/plain sheet fibre sheet in roof covering complete all as specified and as directed.
M & L for 6 mm thick asbestos cement corrugated sheet fixed with L/J type or cranked hook bolts complete all as specified and as directed.
All as per item No. 29 above, but except sheets complete all as specified and as directed.
M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts etc., complete all as specified and as directed.
Fixing only asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts etc., complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed.
Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed.
M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 Sqm each patch complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on ceilings complete all as specified and as directed
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc., complete all as specified and as directed.
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ cement plaster of concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc., complete all as specified and as directed
Demolition of RCC water tank, chajja of any description and in any position not otherwise specifically provided reinforced (reinforcement of cut as required to facilasite demolition etc) complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc., complete including removal of demolished material to a distance as specified.
M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc., complete all as specified and as directed.
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
Supply only water proofing compound complete all as specified and as directed.
M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 Kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric (weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per sqm (OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced (torch) application with 10cm overlaps. A coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed.
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square meter after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square meter and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres APP, membrane grit finish on roof slab all as per manufacturer's instructions and zonal specification etc complete all as specified and as directed.
M&L for 20mm thick screed bed in CM 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement or as per manufacturer's instructions surface etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
M&L for laying 300 mm x 300 mm x 20 mm thick PCC tiles (Hydraulically pressed) with grey cement, set, jointed, cut and polished. The joints shall be grouted and immediately after grouting, the joints shall be pointed flush in in CM 1:3 mixed with 150ml per kg of cement of polymeric based liquid water proofing additive by weight of cement or as per manufacturers instructions etc all as specified and directed. Note : Supply of polymeric based liquid water proofing compound will be measured and paid separately.
Supply only polymer based liquid water proofing compound complete all as specified and as directed.
M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc., complete all as specified and directed.
M & L for wire brush and cleaning any type over roof and chajjas top surface etc, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per Sqm, blinded with grit or pea size gravel @ 0.006 Cum per Sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.
Disconnecting existing tanks of capacity exc 250 & not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note: Cleaning, repairing etc., shall be measured separately.
Disconnecting existing tanks of capacity exc 500 & not exc 1000 liters, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note: Cleaning, repairing etc., shall be measured separately.
Supply and fixed in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR complete all as specified and as directed
Supply and fixed in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.
Supply and fixing in repairs false ceiling of Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUETTE EXPOSED GRID SYSTEM. The tiles should have humidity Resistance (RH of 99%, NRC 0.55 Light reflectance 85% thermal conductivity K=0.052-0.057 w/m k. colour white, fire performance class O class 1 (BS476 Part 6 & 7) in module size of 600 x 600 x 16 mm thick with Bio black coating on the face of the tile, suitable for Green building application, with the re cycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kg per Squaremetre. Silhouette main rummers & cross Tees to have mitred ends and "birds mouth" notches to provide mitred Cruciform junctions. The Tee sections should have a galvanizing of 120 grams per squaremetre & passed through 500 hours of salt test complete all as specified and as directed. Note : The quoted rate is deemed to be inclusive of cost of necessary scaffolding work required at site. Make: Armstrong or equivalent as approved by GE
S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc., complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc., complete all as specified and as directed
M&L for preparing of old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
R G NAIDU CIVIL CONTRACTOR AND BUILDERS
M/S M.N.Reddy
G SATISH REDDY AND CO
ATUL ENTERPRISES
Himagiri Constructions
M/s GM Constructions
M Shyam Sunder
S.R.M.K Enterprises
harshraj and co
SAI RUPA CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .