REPAIR TO FOOTPATH, DRAIN, CHAIN LINK FENCING, HARD STANDING, BOUNDARY WALL, CULVERT AND OTHER MISC ITEMS UNDER AGE B/R I OF GE(NORTH) BIKANER

Amount

Dismantling posts or struts (wood, steel or RCC), any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brick work, masonry, etc complete.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

Dismantling fencing wire mesh any type in any position.

Dismantling timer scantling over 40 sqcm in section in any position.

Ditto as per item No 4 above but under 40 sqcm in section.

Dismatling structural steel work including doors , gates but excluding trusses etc.

Dismantling Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately and old wooden gates)

Demolition of cement concrete nexc 15cm in thickness below or above grond level

Dismantling AC pipes fixed to walls or laid in trenches in any position up to 150 mm dia.

Demucking (Removing of oil/mud) of filled soil in drains of any size depth or section in any condition as per site requirement and as directed by Eng-in-charge

Removal of excavated soil /demolished material to adistance nexc 50m and spreading along road side berms as spfd and directed by Eng-in-charge

Dismantling of reinforced concrete drain pipes , jointed in cement mortar and taking out of trenches if reqd incl excavation of overlain earth work of any dia above 300mm

Demolition of reinforced cement concrete work of any description not specifically provided incl cutting down reinforcement.

Demolition of brick or stone masonary including all arches, pillars, quions etc built in cement mortar.

Excavation in post holes(or similar holes) in loose/ soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exeeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete.

Plain cement concrete type D-2 ( 1:4:8) using 40 mm graded crushed stone agg as in mass concrete and foundation filling

Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete.

Mild steel round bars 10 mm dia or over, cut to length, bend to shape required, fixed independently to support chain link fencing complete all as specified. Fe 410-0 or Fe 310-0

Supply and Fixing mild steel work as in flats , ties, straps etc.

Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 75mm long and dia of shank 11 to 15mm complete.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts, etc including provision of binding wire complete.

Supply only chain link mild steel galvanized fencing, any type or size complete wt 2.00 Kg/Sqm

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Fixing only old barbed wire obtained from dismantling .

Precasted RCC jallies 50mm thick (measured solid ) including all mouldings but excluding frames conforming to type B-0 using 12.5mm graded crushed stone aggregate

Pre cast RCC jali 35mm thick in PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate set and jointed in CM 1:6 incl dismentling of old jali all as specified.

Providing reinforced cement concrete type B1 , 1:2:4 (20mm graded aggregate) in precast post , fencing post straining or terminal post struts etc for fencing average sectional area not exc 100 sq. cm, length n.exc 1.0 mtr with or without chamfered angles and flat splyed, rounded or mitred tops as directed and fixed.

PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,bands , benching and the like incl form work

PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregates as in kbands, plinth course, parapets and raillings kneelrs apex stone bed plates, kerbs stones, kerbs and the like including weathering slightly rounded or chamferd angls and throating as directed by Engr-in-charge.

PCC 1:2:4 type B1 using 20mm crushed stone graded aggregates for precast cement conc slabs as in drain covers / manhole covers set in cement mortar1:4

Reinforced cement concrete 1:2:4 type B1 , using 20 mm graded crushed stone agg as in slab supported on walls, beams and columns, in floors,roofs, and shelves and the like

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work nexc 200mm thick finished rough

Form work to edges of concrete flats, breaks ,conc railing nexc 200mm wide finished rough .

M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire annealed not less than 0.9mm dia

Ditto all as per item No 34 above but 6mm to 8mm dia

100mm thick PCC type B2 1:2:4 using 40mm graded crushed stone aggregate as in floors laid in alternate pannels finished even and smooth without using extra cement and surface vibrators.(Note : Rate include form form work to pannels and contractor shall have no claim for expenditure incurred in this regard)

50mm thick PCC type B-1 using 20mm graded aggregate as in sub base for receiving floor finishes.

25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes.

15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes.

75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base in floors and paving ,laid in panels and finished even & fair compete.

M & L for colour chequerd cement concrete tiles 300x 300x 25mm with set and jointed in near slarry and pointed in white coloured cement to match the existing surface

M&L for heavy duty exterior grade vitrified tiles 300 x 300 x 10mm with set and jointed in neat cement slarry and pointed with white or coloured cement to match the existing surface. (Note: Colour, size & pattern as approved bt Engineer-in-charge. Contractor shall have no claim on which so ever expenditure in the account)

M&L 15mm thick for heavy duty vitrified (GVT/Durga grease) tile of size 0.18 not exceeding 0.38 Sqm each set and jointed in neat cement slarry and pointed in white or coloured cement to match the surface . (Note : Colour, size & pattern as approved by Engineer-in-charge. Contractor shall have no claim on which soever expenditure in theaccount)

60mm thick factory made coloured glazed precast concrete interlocking paver block of grade M-25 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.

80mm thick factory made colored glazed precast concrete interlocking paver block of grade M-25 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.

M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

Rich coloured / light colour cement concrete chequered tiles machine pressed with imported pigment finish (mirror/rough cast) of size 300mmx300mmx(20 to 25 mm ) tcick set and jointed with neat cement slurry

S&F for (dura/endura) stone heavy duty tiles of 10mm thick (area of each tile nexc 0.36sqm ) asin floors jointed in cement slurry and pointed in white or colored cement to match the existing surfacessurfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour/design of tile)

110mm bore PVC (SWR) pipe single socketed cut to size reqd icluding cutting of PCC / brick work etc.

Framed work as in grills/ gratings/ladders/gate(incl MS Sheet) etc ends of bars shouldered or forged in to spikes etc conforming to Fe 290.Gde 165

Expanded metal welded mesh(weight per sqm n exc 4.0 kg) as approved dia cut to length required and tying with and incl mild steel wire or fixing with galvanised steel wires with wood or steel members incl spot welding and shop coat primer complete all as specified

PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in surface channels and drain beds.

Add extra for forming fair finished drain or channel exc. 30cm inner girth in cement concrte using extra cement including forms ,moulds , mitred /stopped ends etc complete for each 25mm girth or part therof over 30cm .

Reinforced cocrete pipe 300mm dia,class NP-2 laid and jointed complete with collars.

Concrete bed to drain pipes 300mm dia type 1:3:6 C-2 including paking under,and haunching against the sides of pipes after they are laid and tested.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius to half brick thick in cement mortar 1:6, all as specified .

Ditto all as per item No 56 above but except bricks

Brick work with fly ash bricks (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:6 but except Bricks complete all as specified and directed.

Fly ash brick work with sub class B bricks st or curved on plan exceeding 6mt mean radius built in CM(1:6))

15 mm thick rendering on fair faces of brick ,finished even and smooth w/o using extra cement in CM 1:4

15mm thck rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar.

Grubbing out tree trunk nexc 30 cm girth of tree including cutting of of trunk portion protruding over ground ,incl cutting out walls of building , plinth protection / walls / slabs etc (any type of trees peeple or any other ) stacking servicable material and removing of unservicable material to a distance nexc 50 and clearing site. (Note : Holes cut out to remove roots shall be repaired and matching the same )

Labour only for prooning off tree roots form walls , roofs etc irrespective of any heights and repairing the same after removal of vegitation

Shingle filling as in floors and pavings / road side nexc 15 cm thick spread in layers nexc 15 cm thick spread levelled and blinded with earth and rammed including watering.

Preparation of surfaces and applying two coats cement base paint on newly plastered surfaces including preparation of surfaces.

Diito all as per item No 65 above but one coat on old decorated surfaces.

Preparation of surfaces and applying two coats of synthetic enamel paint on new steel surfaces or previously untrested steel including preparation over a coat of red oxide Zinc chrome primer.

M&L for pothole ready mix (Patch mate)road repair patching compound Premix of standered grade of 50kg each bag incl laying, ramming rolling etcall as specified and directed by Engineer In charge

Preparation of new concrete surface , wall including cornices, pilasters etc of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat primer complete all as specified and as directed by Engr-in-Charge.

Thermo plastic road marking 2mm thick (lines, dashes, arrows, letters etc on wall, pavements and the like) with road safety spikeries glass beads 8% (As per MORTH specifiation)incl preparation of new or previously treated road surface by using special applicator machine with heating arrangement upto 160 Degree centigrade complete all as specified.

GS BUILDERS AND ENGINEERS

Beenu Co. Company

Satish kumar and company

SHREE GURU NANAK CONSTRUCTION COMPANY

VIJAY KUMAR SHARMA

MAHAVIR CONSTRUCTION CO

M/S ASHRAFI CONSTRUCTION CO

durga construction company

NARAYAN SINGH NARENDRA SINGH AND COMPANY