WORK

ITEM NO. 1 Ramoving cement tles, or marble or Niles, polished shahabad foor or dado without bed concrete including stacking the mabas as rected with all inade, lifts elc, complate (No40-10 PyNa 207) (STATE SSR) Item Spec: (As directed by Engineer in charge)

ITEM NO. 2 Providing and fabricating structural steel work in rolled sections lee joists, channels, angles, tees etc. us per detailed design and drawings or as directed including cutting, fabricating. holating, erecting, faing in position making riveted/boted/welded connections without connecting plates, braces etc. and induding one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete (No23-01, PgNo 173) (STATE SSR) Ram Spec: (Bd C.2 Page No. 275) RA NO.: 1

ITEM NO.: 3 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete (Weight of 5.5 Agsqm)(No38-04, PgNo 233) (STATE SSR) Rem Spec (Ud.R.5, Page No. 453)

ITEM NO 4 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 BWG) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and boll galvanised iron screws and boits, lead and bitumen washers etc. complete (Weight of kg/sqm) (No30-05, PgNo 233) (STATE SSR) Item Spec: (Bd.R.5. Page No 453)

ITEM NO: 5 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq/mt. Total on each side) proflied sheets for roofing. The feed material is manufactured red out of nominal 0.45 min Base Metal Thickness (DMT) (0.5 mm TCT), H-strength steel with min. 500 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (50% aluminium 43.41% zinc 1.01% sillicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 050-1050 mm effective cover width and nominal 26-30 mm deep ribs with subtle square fluting in the five pen at nominal 180-250 mm center-lo-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval, Including fasteners with min. Fastened with min. 25 um Zino-Tin alloy coated, Hex head, self-drilling screw etc Complete.

ITEM NO.: 6 Providing and fixing steel frame door of angle 40 x 40 x5 mm with 16 mm dia, mild steel bars horizontally at 10cm c/c for ventilator portion including iron hold fast for the fixing fixing s shutters including weiding, painting, finishing etc complete

TEM NO 7 Providing second class Burnt Brick masonry with conventional IS. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete

ITEM NO.: 8 Providing and laying Cast in situ/Ready Mix cemerit concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering. formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)(No24-01 NS, PgNo 175) (STATE SSR

TEM NO.: 9 Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 min of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete.

ITEM NO.: 10 Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 min of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete