ADDITION/ALTERATION TO TOILETS AT DRILL SHED FOR WOMEN TRAINEES AT INS CHILKA UNDER GE CHILKA

Amount

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Excavating in trenches not exceeding 1.50 M wide and not exceeding 1.50 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F in repair 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repair 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs including necessary use and waste of form work complete all as specified and as directed.

M&L for 200mm spread thickness soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L sand filling under floors or in foundations or as in sand cushioning of cable including watering and consolidation complete all as specified and as directed.

M&L for broken stone hardcore of guage not exceeding 63 mm , deposited , spread, leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as path, surface finished even and fair complete all as specified and as directed.

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F in repair 15 mm bore dia angle valve chromium plated ,fancy type, screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make :- Parryware cat No G5307A1 or equivalent as approved.

S&F in repair 15 mm bore dia 2 way bib cock double handle with flange, chromium plated fancy type screwed down for iron pipe complete all as specified and as directed. Make:- Prayag Cat No 6612 or equivalent as approved.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in subbase of floor complete all as specified and directed.

M&L 100 mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in subbase of floor complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

S&F 50 mm dia stainless steel hand rail ball of grade 304 as in top of stainless steel tube with necessary fixing arrangements complete all as specified and as directed.

S&F 6 mm dia stainless steel hand rail chain of grade 304 fixed with the hook of stainless steel tube with necessary fixing arrangements complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as requieed, surface finished even and fair complete all as specified and as directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavating surplus soil, exceeding 200 M but not exceeing 250 M and depositing where directed at a level not exceeding 1.50 M above the starting point complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specfically provided for and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and other similar work vertical or to batter rough finished surface of concrete complete all as specified and as directedd.

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair 32 mm dia bore, 800 mm long corrugated PVC waste pipe with cup head for wash hand basin complete all as specified and as directed Make :- Prayag Cat Part No 327 or equivalent as approved.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L Mild steel TMT bar 5mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F in epair PVC soap tray fixed to the wall with screw complete all as specified and as directed. Make : Prayag Cat No 195 or as approved

S&F 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

M&L structrual steel work as in tubular trussess, purlins, rafters etc including special shaped washers, plates, clamps, cleats etc complete joining the pipes with ERW or induction butt welds conforming to IS 1161-1970 grade St-240 complete all as specified and as directed.

S&F 11 to 15 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L 10 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on newly plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.

M&L for applying one coat of weather proof acrylic emulsion, anti dust paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on old decorated external surfaces of walls of any description over 10 cm width/girth etc on columns/pillars , RCC chajja and facia of approved colour complete all as specified and as directed.

M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

S&F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet, overflow and wash out connections including dismantling existing unserviceable water tank and removal from site complete all as specified and as directed.

S&F in repair chromium plated fancy type health faucet with hose & hook for EWC including all necessary fitting complete all as specified and as directed. Make :- Prayag Cat No 452 or equivalent as approved.

S&F Vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair plastic water closet seat (EWC), white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F stainless steel tube grade 304, railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F Vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets, complete including 15 mm bore chromium plated pillar tap complete all as specified and as directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets, complete including 15 mm bore chromium plated pillar tap complete all as specified and as directed.

S&F in repair 15 mm bore dia chromium plated pillar tap of cast copper alloy, fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 102 mm dia chromium plated round shaped doom type grating for floor trap complete all as specified and as directed. Make:- Prayag Cat No FT-03 M or equivalent as approved

Supply only water proofing compound complete all as specified and as directed.

S&F 40mm dia pipe Low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 as in waste pipe to wash basin /kitchen sink/urinal all as specified and as directed.

S&F in repair 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-60 gms) suitable for urinals complete all as specified and as directed.

S&F in repair 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-60 gms) suitable for wash hand basin complete all as specified and as directed.

Cutting into existing manholes for connecting new 150mm internal dia of drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specifed and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet overed with 3mm thick laminated sheets for mounting for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No 90 above but one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 90 above but with 2.5 Sqmm PVC FRLS insulated multistranded copper cable with 2.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity for power power point on independent board complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 Volt, complete all as specified and as directed.

S&F switch socket combination , 2 in 1,3 pin 5/16 Amp, 230 Volt, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F 1X18 Watt tube light fittings with lamp Endura linear LED wall mounted LED batten, extruded aluminium heat shrink provided for efficient heat dissipation and intergrated electronic driver complete with LED retrofit T8 polycarbonate tube of capacity 18 Watt with decorative holder including connection with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Philips Cat Part No.BN021CLED22S PSU CW GR or Wipro Cat Part No W10921208(batten/channel) and LL-13-18-65SE(LED Lamp) or Havells Cat Part No REGALBATTEN8UPTO 1X22 SSBSWH(Fixture) and PHOTONUNTRA E2.01213T8SSTL18WLED 865 SPC(T-8 LED tube) as approved.

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 8 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F Exhaust fan 300 mm sweep, 1400 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plate by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , funnel etc complete all as specified and testing on completion.

M&L cutting opening through brick/stone wall built in cement mortar for fixing exhaust fan of 300 mm sweep and making good the disturbed surface in cement mortar 1:4 and applying two coats of white wash to match with the existing complete all as specified and as directed.

Cutting and screwing existing steel tubing 20 mm bore for insertion of new tee of 20 mm dia for branch connection complete all as specified and directed.

S&F LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 and 32 mm dia galvanised iron pipe light grade bracket having 1.5 m length with suitable clamp with nuts and bolts for fixing complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25 W or Havells Cat Part No : VILUMINASL25WLED757SASYB as approved.

S&F 9 Watt tube light fitting with lamp, Endura linear LED, wall mounted batten with polycarbonate housing and intigrated driver for efficient heat dissipation having THD<20% with complete including connection with two core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS9WLED865SPCWH or Bajaj Cat part No BCLSB 10WH as approved.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces of any description exceeding 10 cm width or girth complete all as specified and as directed.

S&F 25 mm bore dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (mininimum weight -455 gms) complete all as specified and as directed.

RCB CONSTRUCTION

HARI PALAI

PRADIPTA KUMAR PANI