Additional works of construction of Transit Night Shelter for Registered Construction works under the Assam Building and other construction workers welfare Board at Gopinathnagar Guwahati 16 Assam

Amount

A: Civil Works

FLOORING AND FLOOR FINISHES

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop 1:3 incl cutting where necessary finished with flush pointing with Fix-A-Tile with white cement slurry mixed with approved pigment to match the shades of granite slab, complete at all levels as specified and directed. (Cement plastering to measyred paid separately)

(iii) Deluxe Quality

With FIX-A-TILE ( Choksey/Sika/Pedellite/Rouf)

GRILL WORKS

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.

I . Plain grill

(c) Fixed to Brickwork/P.C.C/R.C.C.

STEEL RAILING

Providing and fixing Stainless Steel (Grade 304 ) railing made of Hollow tubes ,channels, plates etc.,including welding ,grinding ,buffing ,polishing and making curvature (wherever required)and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Enginner incharge .(For payment ,only weight of stainless steel members is to be considered .No extra payment for fixing accessories such as nuts, bolts, fasteners etc.will be considered)

Providing and fixing M.S. Tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete as specified and directed by department

PVC DOORS AND DOOR FRAME

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Make: Standard Brand

30 mm thick FRP flush door shutter in different palin and wood finish made with fire retardent grade unsaturated polyester resin, moulded to 3 mm thick FRP laminates all around, with suitable wooden blocks inside at required places for fitting and PUF/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminates conforming to table 3 of IS: 14856, complete. Make: Standard Brand

IRON ROLL SHUTTERING

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Main Entrance Step and Curved Step

Main Entrance Step

Brick work in cement mortar with 1st Class brick including racking out joints and curing complete as directed:

i) In Sub Structure upto plinth level including de watering if necessary in proportion 1:3

Curved Step

Brick work in cement mortar with 1st Class brick including racking out joints and curing complete as directed:

ii) In Super Structure above plinth level including de watering if necessary in proportion 1:1:9

FRP FLUSH DOOR

Providing and fitting of FRP Pannelled Door made of 30 mm thick of required colour with fire retardent grade polyster resin moulded to 3 mm thick FRP laminates for forming hollow rails and styles with wooden frame and suitable blocks for fixing to the door frame.

PARTITION WORK

Providing and fitting and fixing in position plywood/Hard Board partition walls with 6 mm ply/ hard board with vertical and horizontal Aluminium battens of suitable spaced at not more than 1.2 m apart with necessary rails, screws, bolts etc. complete.

A. Electrical Works:

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.

3 module type Metal

4 module type Metal

6 module type Metal

8 module type Metal

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.

3 module

4 module

6 module

8 module

Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /KEI / Polycab/Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Richa/Presto Plast/ MW or equivalent make as approved by the Deptt.) wiring system.

With 2 x 1.5 sq. mm. cable in 25 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /KEI/Polycab / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.

With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /KEI/Polycab/ Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 25 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

B Series (Schneider MG, legrand, Hager make)

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

B Series (Schneider MG, legrand, Hager make)

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)

Ceiling Fan 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

Domestic

Phillips/Bajaj/Magik LED Batten 12 Watt 3000/6500K or equivalent as approved by the deptt.

Supplying with fitting and fixing 100 watt electronic modular fan speed controller including making necessary connection as per direction of department.

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)

25.00 Sq.mm 3 Core U.G. cable in 40mm dia medium duty G.I. pipe

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

Payment of Load Security, Meter Security etc to ASEB

Supplying with fitting and fixing of PVC Junction Box for conduit laying with proper saddle, Gutka etc

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying with fitting fixing of surface & wall mounted 18 Watt LED luminaries complete with all accessories including 1.5 sq.mm PVC insulate S.C. copper conductor as required and as directed by the deptt.

Supplying with fitting fixing of surface & wall mounted 12 Watt LED luminaries complete with all accessories including 1.5 sq.mm PVC insulate S.C. copper conductor as required and as directed by the deptt.

Supplying with fitting fixing of surface & wall mounted 6 Watt LED luminaries complete with all accessories including 1.5 sq.mm PVC insulate S.C. copper conductor as required and as directed by the deptt.

Supplying with fitting fixing of surface & wall mounted 2 Watt LED luminaries (Spot Light) complete with all accessories including 1.5 sq.mm PVC insulate S.C. copper conductor as required and as directed by the deptt.

Supplying with fitting fixing of surface & wall mounted LED strip light complete with all accessories (HAVELOCK).

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 2 Module (75mmX75mm)

12 Module (200mmX150mm)

18 module type Metal Box

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

2 Module

12 Module

18 module Front Plate

7.5 HP Three phase borewell sub mersible pump set (Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma make) 3200 rpm A class insulation with DOL Starter(Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma / Siemens make)

D.O.L Starter (Crompton Greaves / Control & Switch Gear / BCH / L&T / Siemens make) 0.5 HP to 10 HP, 0.72 HP to 20 HP

Supply and Installation of Electric Driven Hydrant pump of 3 HP, 12 LPS, 14 Mtr Head with all accessories. Make Kirloskar or Equivalent

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated)

2 HP Single phase Centrifugal monoblock pump set (Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma make) 2900 rpm A class insulation with DOL Starter(Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma / Siemens make)

D.O.L Starter (Crompton Greaves / Control & Switch Gear / BCH / L&T / Siemens make) 0.5 HP to 10 HP, 0.72 HP to 20 HP

3 HP Three phase fire hydrant pump set (Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma make) 2900 rpm A class insulation with DOL Starter(Cropmton Greaves / Aquatic / CRI/ V- Guard / Calma / Siemens make)

SITC of vermin proof and dust proof totally enclosed phosphatised powder painted cubicle indoor type floor/ wall mounting compartmentalised panel board…comprising of the following electrical items.

Supply and Fixing of Fire Hydrant Control panel for 3 phase 3 HP Fire Hydrant Pump

IN PANEL

Supplying and Fixing panel mounted open execution 415 V 50 Hz 4p MCCB 125 A

Supplying and Fixing panel mounted open execution 415 V 50 Hz 4p MCCB 63 A

Supplying and Fixing panel mounted open execution 415 V 50 Hz 4p MCB 32 A "C" Curve

Supplying and fixing 4 P 415 V front Handle open execution On Load Change over switch 250 A

FOR AC

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

B Series (Schneider MG, legrand, Hager make)

A. Sanitary Works

IRON REMOVAL FILTER

Taurus make FRP composite structural vessal iron removal filters of 100% rustproof vessels complete with top & bottom strainers , Multiporty valves, Quality filter media eg-treated sand MnO2 , Barakar sand Gravels & pabbles, IsQ, Nsf certified

5000 Liter capacity

CPVC PIPE

Supply and Fitting of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia

Supply and Fitting of Chlorinated Polyvinyl - chloride (CPVC) pipe 80 mm nominal dia

CPVC NIPPLE

Supply and Fitting of CPVC Nipple of 50 MM Dia

SHOWER

Supply and Fitting of Telescopic Shower to the existing CPVC Pipe with appropriate Bend/Socket/Clamp/Union etc for easy usage

MANHOLE COVER

Supply and Placing of Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 2.5

WATER COOLING

Supply Installation and Testing of Water Cooler 40/80 (USHA Cat No. 6211220004NU)

Supply Installation and Testing of Water Cooler 60/120 (USHA Cat No. 621038001NU)

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Ptton make over the stagging with manhole cover with locking and cleaning arrangment including providing pads of size as required for inlet and outlet pipes

i) 5000 lt capacity

(a)Polycon make

Indian Pan

Supply and Fixing of China Clay made Indian Toiet Pan to the Floor and Fitted with proper outlet system for easy Flushing after use.

Bathroom Door

Providing and fixing in position 6.5'x2.5' aluminium door with anodised color fimished coating comprising of 1.5" x 1.5" Vertical & Horizontal member with 3 mm ACP sheet, Heavy duty Hinges, Bolt Fittings to the frame made of Aluminium Bar.

Ladies Urinal

Fitting and Fixing China Clay made ladies Urinal Pan fitted to the Floor with appropriate flushing system amg necessary bend/union etc for easy flushing

A: Septic Tank

RCC Septic Tank

A: RCC Water Tank

Earthwork

Earth work in excavation for foundation trenches of wall, retaining walls, footing of column, steps, septic tank, etc including refiling (return filling) the quantity as necessary after completion of work, breaking of clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified (A) Upto a depth of 2.00 m below the existing GL

(a) In ordinary soil

Concrete work

Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, wall, brick works etc as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately)

(b) In proportion 1:3:6 (1 cement:3 coarse sand:6 coarse agg. By volume (using mixture machine)

Providing and laying 25 mm thick damp proof course with cement concrete in proportion 1:1.5:3 with graded stone aggregate of 10 mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer icluding curing etc complete as directed

Reinforced Concrete Cement

Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of formwork and reinforcement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A) In substructure upto plinth level : in foundation footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick upto plinth level N) Without using admixture, plasticiser

M20 or Prop. 1:1.5:3

Formwork

TIMBER SHUTTERING (FORMWORK) Providing formwork of ordinary timber planking so as it to give it a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling notexceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc

(b) Using 25 mm thick plank, Footing/ Pile Cap

Side of tie beams, grade beams etc at or below ground level

Sides of tie beams, grade beams etc at or below ground level

PLYBOARD SHUTTERING

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like upto second floor level

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the lik first floor level

a) Floors etc. upto 200 mm in thickness

Steel Reinforcement

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work/RB walling including straightening, cleaning , cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st level floor level)

From Primary Producer: TATA/SAIL/ Esser Steel/Jindal steel/Shyam Steel/ RNL

(i)TMT Corrosion resistant steel (CRS) reinforcement bar

Masonry Work

230 mm thick brick wall in cement mortar with 1st class brick including racking out joints and curing complete as directed in structure

(I)In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protrouding M.S road/Tor steel of column to be embedded in cement mortar and will be measured and paid separately

(A)112 mm thick brick wall

(a) In cement mortar in proportion 1:4. (1 cement :4 sand ) at ground floor

Finishing

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering including arises , internal rounded angles, not exceeding 80 mm girth and finished even and smooth including curing completed as directed

(A) In rough side

a) In cement mortar 1:4

Ground Floor

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed

A) On Fair side

a) In cement mortar 1:4

A: Boundary Wall

EARTHWORK

Earth work in excavation for foundation trenches of wall, retaining walls, footing of column, steps, septic tank, etc including refiling (return filling) the quantity as necessary after completion of work, breaking of clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified (A) Upto a depth of 2.00 m below the existing GL

(a) In ordinary soil

Concrete work

Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, wall, brick works etc as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately)

(b) In proportion 1:3:6 (1 cement:3 coarse sand:6 coarse agg. By volume (using mixture machine)

Reinforced Concrete Cement

Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of formwork and reinforcement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A) In substructure upto plinth level : in foundation footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick upto plinth level N) Without using admixture, plasticiser

M20 or Prop. 1:1.5:3

Formwork

Providing formwork of ordinary timber planking so as it to give it a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling notexceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc

(b) Using 25 mm thick plank, Footing/ Pile Cap

Side of tie beams, grade beams etc at or below ground level

Sides of tie beams, grade beams etc at or below ground level

Steel Reinforcement

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work/RB walling including straightening, cleaning , cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st level floor level)

From Primary Producer: TATA/SAIL/ Esser Steel/Jindal steel/Shyam Steel/ RNL

(i)TMT Corrosion resistant steel (CRS) reinforcement bar

Masonry Work

Providing soling under floor for ground floor only with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete

a)Brick on flat soling

230 mm thick brick wall in cement mortar with 1st class brick including racking out joints and curing complete as directed in structure

(I)In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protrouding M.S road/Tor steel of column to be embedded in cement mortar and will be measured and paid separately

(A)112 mm thick brick wall

(a) In cement mortar in proportion 1:4. (1 cement :4 sand ) at ground floor

Sub-Head : Finishing

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering including arises , internal rounded angles, not exceeding 80 mm girth and finished even and smooth including curing completed as directed

(A) In rough side

a) In cement mortar 1:4

Ground Floor

PAINTING

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surfaces over 100 mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

BASIC RATES (GI WORK)

Iron work of GI in sections, fixed with or without connecting plates, including cutting, hoisting, fixing in position and applying a priming coat of standard primer on channels, sections, Joints etc.

A: False Ceiling

False Ceiling

Supply and Fitting False Ceiling with 12.5 mm Gypsum Board and Al channel fitted to the ceiling with required accessories. (ii)12.5 mm thick

Approved Brand

A: IRON GATE and GRILLS (GI Works)

Iron Gate

Fitting and Fixing of Iron Gate of Size 18x6 Ft as Entrance Gate

Fitting and Fixing of Iron Gate of Size 5x6 Ft as Wicket Gate

Fitting and Fixing of Iron Grill of Size 32x5 Ft at Office Area

Iron Grills

Fitting and Fixing of Iron collapsible gate in Women Block

B: MODULAR KITCHEN

Modular Kitchen

Supply & Installation of I.S.I approved brand Modular Kitchen with exhaust, cooking facilities and storage etc.

Brand: Renbow/KLE or Equivalent

6 seater Dining Table

Supply Installation of 6 seater dining table

Brand: Supreme/ Neelkamal or equivalent

Dining Chair

Supply Installation of I.S.I approved brand 6 seater dining table (supreme, Neelkamal Etc.) Brand: Supreme/ Neelkamal or equivalent

B: Conference Interior

INTERIOR WORK

Providing and fixing entire Room wall panelling for supporting Acoustic fitting 6mm thick water proof plywood over the support frame of alumunium tube section of size 50mm x 25 mm of 18G thickness for the plain surface etc complete.

Providing and installing Acoutic Wall panelling using 8' x 4' NOWOFILL IB Series (IB-2000) or equivalent Acoustic Insulation material 9 mm thick and minimum 200 kg/cu.mtr density Fire Proof Class A, Humidity and Fungal Resistant and easily cleanable. NRC Max 0.85 and Excellent Tensile quality and material of approved colour

Doors : Providing and fixing Alluminium Composite Panel (ACP) on flush door, with 3mm dia & 12’’ long S.S. handle, hinges, tower bolts and other hardwares, lipping, polishing etc. complete over The existing door.

Providing and Fixing in False ceiling hanging Vinyl Ply with GI Frame work of standard gauge and as per the specifications of India Gypsum Co. The rate to include painting with lustre paint and making necessary design, pattern & Cut outs for light fittings, Cove Light etc complete as per directed and specified

Providing and fixing of 2 mm Carpet Flooring of make supreme, rugs or equivalent complete.

Providing and fixing Roller blinds of approved shade for covering Window & Ventilator etc., design and texture Vista Levelor/Mac/Eqvt. complete as directed and specified.

Magnetic White Board: Supplying and fixing in position Magnetic white board of size 900x1200 mm with movable stand with fabrication of GI Stand, wheels for movement in site and all accessories like magnetic duster, Markers etc of white mark or equivalent make all complete flush door Stoppers.

Fabricating and Fixing in position U shaped senate conference table for sitting 31 (15+3+15) persons. All parts of the table to be fabricated with 19 mm BWP ply boards of approved quality with matt lamination of 1.0 mm thick on all exposed faces. Colours/ Shades of French Sprit polish and veneers to be approved by the Engineer-in-charge complete in all respects.

Providing and placing high back revolving Chair of standard size.

Providing and placing mild back revolving Chair of standard size.

Providing and placing Low Height Chair of standard size.

Conference Electrical

Supply Installation and testing of Robust design with Aluminium die cast body Round Panel GARNET WIPRO or Equivalent Panel LED light, Good heat dissipation ensures longer life, Anti Glare LGP Technology, safe for Eyes, LM 890 tested SMD LED technology, High Voltage Protection upto 3800 VAC, surge protection up to 2.5 KV, CAT No D821665, Wattage 12 W, CCT (K) 6500 Lumens(Lm) 1140.

Wiring in PVC conduit of IS specification of Proper size with core PVC insulated stranded copper wire 11KV grade (Finolex/Havells/Polycab/ RR Kabel/ Richa or equivalent) and with all materials supply ,installation connection complete with 4 + 1 nos 6 sq.mm for AC System.

Supply Installation, testing and commissioning of distribution box manufactured of sheet steel enclosure with the following MCBs (DBs and MCBs- Legrands/ Havells/ Siemens/ Hager or Equivalent) and connecting the same to the system

UPS DB/ RAW Power DB, SPN Double Door with 40 A (30 mA) DP RCCB as incomer and 3 nos 10 A SP MCB as out going

DB with 63 A TP MCB

DB with 40 A DP MCB

AVO DB, SPN double Door with 40 A (30mA) DP RCCB as incomer & 3 nos 10 A SP MCB as out going

Modular AC Starter 25 A

VTPN Distribution Board with 125A 4 Pole MCCB ( 36kA) as incomer and 2 nos. 63 A TP MCB, 4 Nos of 40 A SP MCB, 2 No 32 A TPN MCB, 8 Nos of 16 A SP MCB & 10 Nos of 32 A SP MCB as Out going.

Supply and laying of PVC Armoured cable complete with cable glands and 2 nos of 8 SWG GI Wire. (Make: Havells/ RR Kable/ Richa or Equivalent)

3.5 Core x 25 Sq MM

Wiring for light points using 3x1.5 mm 1.1 KV grade PVC insulated stranded copper conductor wire (Finolex/Havells/ RR Kable or Equivalent) for Phase, Neutral and Earth in 25 mm dia heavy duty MS/PVC conduit alonhg with associated accessories like MS/PVC junction Box, bends, saddles, screws etc concealed in wall, floor, under flooring, below false ceiling or on surfaces as well as suspended from ceiling with 25 x 3 mm MS Flat suspenders duly painted above false ceiling from individual light/ fan/Exhaust fan outlet etc. to individual modular type switch boards, 10 A modular plate type switches etc ( MK/Legrand/ Havells/Hager or equivalent) as required complete incuding circuit wiring with 3x2.5 sq mm 1.1 KV grade PVC insulated stranded copper conductor wire as per site requirement ans as instructed by the Engineer

One light controlled by one switch

6 A socket and switch at same board

Supply, Installing and Commissioning of earth station including digging and refilling back the pit with chemical material and with 3.15 mm x300 mm size copper plate duly tinned throuh out the surface of the plate palced at least 1.5 mtr below the ground level with 2 nos 2.5 sq mm PVC insulated stranded cop[per conductor in 10 mm GI PIPE fixed to the plate and providing 40 mm 2 mtr long GI pipe with reducer and funnel at top for watering with supplying and laying earth continuity wire of 2x10 sq mm copper stranded PVC Green color in heavy duty MS conduit on the wall from earth plate to starting point of the line earth conductor.

Supply Laying and Fixing of 2 core 25 Sq MM Al armoured conductor from main panel to the VTPN at the 3 rd floor with all necessary clippings, terminals etc. (Make: Richa, KEI, Polycab or equivalent)

AVO point wiring in PVC conduit of IS specification of proper size with 3nos 2.5sq.mm single core PVC insulated stranded copper wire 1.1KV grade and with all material supply installation and commissioning complete from CDB/PDB(Raw) .The wiring shall be carried out on surface above false ceiling by chiseling the existing surface and plastering the same with cement etc. after fixing the MS conduit with all accessories like saddles screws, bends T-joint etc. 2 coats of painting Matching to the surface including supply installing, testing, commissioning of modular plate type switch and socket (Legrands / MK/Scheinder/Hager or equivalent) for computer terminal on sheet steel enclosure (cadmium plated),duly fitted with screw to the steel conduit and fixed to the wall partition furniture with all interconnection and proper earthling .All the opening shall be covered with blank plate and be sealed to make the box vermin proof.B48(maximum three points in single circuit)

With 3 nos 6A socket with single 16A switch

With 2 nos 16A socket with individual switch

With 1 nos 16A socket with individual switch

Providing and Fixing Wall Fan for Heat Dissipitation

Conference AC

S.I.T.C. of 3 Star 2.0 Ton capacity high wall splitt AC comprising Indoor & Out-door units. Make: Godrej/Voltas/ Carrier.

S.I.T.C. of 5.0 KVA voltage stabilizers for above capacity Air-Conditioners ( Standard Out Put/ Input). Make: Voltas/V Guard/ Microtek/ Skyland.

Supplying and Laying of Copper Pipes, Drain pipes, Copper Wiring, Insulation Etc in GI Conduit

S.I.T.C. of L shape / suitable shape M.S. Frame stand for mounting Outdoor Units on wall / On floor with all fixing hardwares for split A.c.’s.

Conference Audio and Video

65" Full HD LED TV

Logitech 4 K Camera for Video Conferencing

Dongle for Wireless Screen Sharing

Bluetooth Speaker Cum Microphone

Panel Stand

Table Connectivity Box with 1x Universal Power 1x RJ45 Network 1x VGA 1x 3.5mm Audio 1x HDMI

40 Watts, wall speakers 1)Nominal impedance-6ohms 2)Power handling capacity: Average: 40 W Programme: 80 W.

Amplifier: 1)Number of amplifier channels: 4 2)Max total output all channels driven: 240W.

Cable & Connectors (VGA/Audio/HDMI/Patch Cords)

Installation/ Commissioning Charges

JIO Fibre Broadband Connection

B: DG SET 62.5 KvA

DG SET

Supply Installation Testing and Commissioning of 62.5 KvA DG set on suitable PCC Bed. The DG Set should be CPCB II Approved for emmission and Fitted with 3 Phase Standard Control panel For 50 Hz 1500 RPM Engine and AC Generator. First filled Lube oil and Day running Fuel Tank.

Brand: (KOEL, Mahindra, Ashok Leyland Etc.)

B: CC TV

Supply Installation Testing and Commissioning of CC TV of Approved make with 32 Channel NVR, Storage System, and wiring for round the clock monitoring of the campus.

Brand: HikVision, CP Plus Etc.

B: ROOF TREATMENT

RCC ROOF TREATMENT

Providing and Laying of leak proof SMARTCARE APP MODIFIED POLYESTER SHEET REINFORCED BITUMINOUS MEMBRANE (3 MM) on top of SMARTCARE BITUMEN PRIMER for durability and Damp proof.

Brand: Asian Paints

B: SOLAR STREET LIGHT

SOLAR STREET LIGHT

Supplying, Fitting and Fixing of 12 V 16 W Solar Street Light with 6.5 Mtr GI Pole at designated places either on PCC base or Fixed to Boundary Wall Pillars with appropriate GI Clamps.

Approved Brand

B: GLASS GLAZING AND PORTICO WORKS WORKS

Front Glass Glazing

Supply and Installation of 5 mm ST-767 reflective Toughened Glass structural glazing with AC-2 (2x2) section and with support of 19 mm x 19 mm sub frame with sealant

Portico Canopy With Glass

Supply and Installation of 10 mm clear toughened glass canopy system with Aluminium section support at bottom

B: TOUGHENED GLASS MAIN ENTRANCE GATE

Toughen Glass Main Entrance Gate

MAIN GATE: Providing and fixing glazed door made of 12 mm thick Toughen glass (Make: saintgobin, modigurd) with frosted film fixed in between top & bottom rail and side stile teak wood framework of size 125 mm x 50 mm. The framework to be finished with 1.0 mm thick laminate on both side. Glass to have acid etched design pattern with logo as directed. Doors to be mounted on heavy duty floor spring. Rate shall inclueds all hardwears such as: Two nos S.S. finish handle, lock, door stoper, hinge, tower bolt etc. of approved make.

B: WOODEN PATTERN ON BOTH SIDES OF LIFTS

Designing of Lift Exterior Panel

Providing and fixing entire front both LIft wall panelling with supporting chanel and framing with Ramco Hicem Fibre Plank with melamine polish burnishing and clean the surface etc complete as directed and specified. Size: