PROVISION OF WEATHER SHELTER AT OFFICER MESS AND CERTAIN SANCTION WORK AT AFS AMLA

Amount

Excavation in trenches n exc. 1.5m wide & n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed. (17+16)

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. (2+12)

M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4, (20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete Complete all as specified and directed.

M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4, (20mm graded aggregate) Columns, pillars, piers, posts and struts Complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter) flat surfaces and fair finished complete all as specified and directed.

M & L for Providing formwork to sides of pillars, posts, struts, piers, columns and stanchions square/rectangular surfaces and fair finished complete all as specified and directed.

M & L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking,bending spirally for hooping ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. (300+700)

All as per item No 07 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment .Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S&F 20mm dia Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 30cm long Complete all as specified and directed.

S&F rolled mild steel work in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S & F for steel work ,Fe-410-W (Gde-E-250) quality-A, in roof trusses(framed) /purlins /crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats ,gusset plates etc complete all as specified and directed.

S & F mild steel screw bolts (machine made) 11mm to 15 mm dia with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutters fixed with self tapping screws complete all as specified and directed.

M&L for preparation of untreated new surfaces of steel and iron work exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 Type B-I (using 20mm graded aggregate ) , as in top layer , finished fair and even complete all as specified and directed.

M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for brickwork with fly ash ,subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster , (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surfaces complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. (6+16)

M&L for providing precast reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in boundary pillars posts, fencing posts, straining or terminal posts, struts etc., for fencing, average sectional area n exc 600 sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops with imposed words as directed and fixed complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia over cut to length bent to shape required inlcuding cranking, bending spirally for hooping ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified and directed with hangers 6 mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G. I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

S & F 6 mm thick non asbestos fiber cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S&F in position aluminium composite panel (ACP) panelling any colour with frame of min 20 gauge 35mm x 25mm aluminium section in 600 c/c both ways minimum 3mm thick ACP to be fixed over the framework with 3 m & equivalent adhesive and mirror screw in 600mm width panels or distributed equally, joints to be finished with sillicone based sealant complete all as specified and directed.

S&F Bands straps, supports or stays for rainwater ventilating pipes, including bolts, of required: hooks (stay), heavy, for lage gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to woos trusses or rafters; knee piece inserts' twi way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

VIJ ASSOCIATES (BID ID -3164590)

Vee kay construction (BID ID -3158115)

Captainkomalchaharconstructions (BID ID -3164528)