Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹64.4 L
EMD Value
₹1.3 L
Closing Date
20 Mar 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works.
21 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
Hyderabad Division: A) Extension of Pit line towards SC End in Power car shop in CWS/LGD under SSE/W/WS/LGD, B) Reflooring in CWS Lallaguda with Epoxy Reflooring System under SSE/W/WS/LGD
21_DRM_W_HYB_26
21_DRM_W_HYB_26
Open
Works - General
9 Months
Hyderabad, Telangana
₹0
₹1.3 L
20 Mar 2026
24 Feb 2026
6 Mar 2026
79 items across 5 schedules · ₹70,63,403.22 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 34.05 | 261.35 | 8,898.97 |
| 2 | Beyond 5 km upto 10 km per km | cum- km | 170.25 | 18.53 | 3,154.73 |
| 3 | Beyond 10 km upto 20 km per km | cum- km | 340.5 | 15.08 | 5,134.74 |
| 4 | Beyond 20 km per addl. km | cum- km | 170.25 | 12.14 | 2,066.84 |
| 5 | 1km | cum | 54.38 | 217.55 | 11,830.37 |
| 6 | 5km | cum | 252.13 | 326.68 | 82,365.83 |
| 7 | Beyond 5 km upto 10 km per km | cum- km | 271.9 | 23.16 | 6,297.2 |
| 8 | Beyond 10 km upto 20 km per km | cum- km | 543.8 | 18.85 | 10,250.63 |
| 9 | Beyond 20 km per addl. km | cum- km | 271.9 | 15.17 | 4,124.72 |
| 10 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 10 | 494.1 | 4,941 |
| 11 | All kinds of soil | cum | 180.47 | 177.5 | 32,033.43 |
| 12 | All kinds of soil. | cum | 100 | 260.3 | 26,030 |
| 13 | Ordinary rock | cum | 4 | 632.95 | 2,531.8 |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 54.38 | 196 | 10,658.48 |
| 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 38.48 | 2,123.75 | 81,721.9 |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 28.4 | 392.15 | 11,137.06 |
| 17 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 170 | 842.5 | 1,43,225 |
| 18 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 5.63 | 20,355.8 | 1,14,603.15 |
| 19 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 15 | 8,752.55 | 1,31,288.25 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 5 | 7,311.25 | 36,556.25 |
| 21 | Acid and alkali resistant tile | Sqm | 300 | 1,884.9 | 5,65,470 |
| 22 | 1:4 (1 cement: 4 fine sand) | Sqm | 288.8 | 399.45 | 1,15,361.16 |
| 23 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 200 | 193.7 | 38,740 |
| 24 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 200 | 170.7 | 34,140 |
| 25 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 44.05 | 2,434.25 | 1,07,228.71 |
| 26 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm | 108 | 747.8 | 80,762.4 |
| 27 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer- in-charge. (The panel shuttering work shall be paid for separately). | cum | 10.38 | 9,823.8 | 1,01,971.04 |
| 28 | Providing and placing in position 100 mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads and lift, handling at site etc. all complete as per direction of Engineer-in- Charge. | Sqm | 5 | 3,081.95 | 15,409.75 |
| 29 | 200 mm diameter | Metre | 35 | 970.35 | 33,962.25 |
| 30 | 200 mm diameter S.W. pipe | Metre | 35 | 1,375.45 | 48,140.75 |
| — | 5101.44 | 107.85 | 5,50,190.3 | ||
| — | 2827.59 | 133.7 | 3,78,048.78 | ||
| Kg | 300 | 206.35 | 61,905 | ||
| Kg | 500 | 172.6 | 86,300 | ||
| Schedule total | ₹18,70,036.41 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditions.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
RevisedBrandsandmakesapprovedlist2025.pdf Approved brand
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
RevisedBrandsandmakesapprovedlist2025.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .