Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹47.2 L+₹23,710 (0.50%)Rejected-Finance MATHOSHREE PLOT NO 55 SR NO 787 A BEHIND ASHWANI HOSPITAL GOVIND NAGAR NASIK 422 009 | NASIK | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹48.7 L+₹1.7 L (3.72%)Rejected-Finance FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹49.1 L+₹2.1 L (4.49%)Rejected-Finance 1101 A WING SACHDEV COMPLEX JANGAL MANGAL RAOD BHANDUP W MUMBAI 400078 | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹49.3 L+₹2.3 L (4.93%)Rejected-Finance FLAT NO 20 AMBEDKAR ROAD DEHU ROAD PUNE 412101 D 101 CESC INDEX NO D 101 HQ CESC PUNE | NA | NA | 412101 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
23 Jan 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_571348_1
83612/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
NASIK
AS PER NIT
7 documents required · 7 mandatory
₹1,000
Yes
GE NASIK ROAD CAMP
₹1.1 L
Yes
14 Feb 2023
26 Dec 2022
25 Jan 2023
26 Dec 2022
23 Jan 2023
17 Jan 2023
27 Dec 2022 - 7 Jan 2023
Amount
Supply , install, Design testing and commissioning of CPRI approved factory made and tested outdoor type floor mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved aluminium bus bar of rating 300 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.00 mm CRCA MS sheet with projected globe roof for rain water protection Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and 50 X 50 X 6 mm thick MS angle iron frame 60 cm above and 60 cm below normal ground level work front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs cable gland and PCC foundation in cement concrete 1:3:6 (20 mm graded stone aggregate, testing after installation including complete all as specified & directed and comprising of followings:-
(A) Incoming:- (a) Aluminium bus bar TPN 450 Amps - 01 Set (i) Danger notice plate/ sticker of suitable size on front panel board -01 No (ii) MCCB 4 pole 250 A 36 kA- 01 No (B) Outgoing:- (i) MCCB TPN 100 Amps 05 No (ii) MCCB TP 63 Amps 02 No (iii) MCB SPN 63 Amps 01 Nos (iv) Digital timer with contactor (v) Each outgoing Feeder Name Radium Sticker Inside Panel. (vi) voltmeter, Ammeter and selecor switch (vii) Phase indication lamp R, Y, B LED type
Taking down unservisable U/G cable from trenches, wall, floor etc upto 35 sqmm
Taking down unservisable U/G cable from trenches, wall, floor etc from 50 upto 95 sqmm
S& F XLPE insulated armoured and PVC sheated heavy duty electric cable of following sizes aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete
2 core 10 sqmm
4 core 16 sqmm
3.5 core 35 sqmm
3.5 core 50 sqmm
3.5 core 70 sqmm
3.5 core 95 sqmm
Material and labour for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.
Material and labour for Double Walled Corrugated DWC HDPE Pipe of outer dia 90mm and innter dia 75mm including 90 degree bends with coupler and rubber ring laid in trenches of size 90 mm suitable for cable protection of size 70 sqmm to 95 sqmm cable complete all as specified and directed.
Dismantling of existing U/S HT/ LT pole of any size & type from its position carefully and removing from the site and necessary excavation and earth work in any soil/strata, demoltion of concrete, disconnection of conductor fom pole etc. complete all as directed.
Supply, install erect in trench vertical position steel tubular seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm finial taper plug pole cap, bolts, nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 9 mtr long 410 SP-31 including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, with inbuilt junction box for 3 phase 4 wire AC supply and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge.
EXCAVATION BY TENCHLESS TECH - Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia. Suitable for 0.4 mpa working pressure.
M&L for cable jointing kit for 11 KV ( Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed by Engr-in-Charge
M&L for cable jointing kit for 11 KV ( Earthed) grade cable for outdoor termination Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed by Engr-in-Charge
M&L for cable jointing kit for 11 KV ( Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed by Engr-in-Charge
Supply and joint cable jointing kit straight through joint epoxy type of size 10 sqmm 4 core to 16 sqmm 4 core all as specified and directed. Make : Denson, Raycom
Supply and joint cable jointing kit straight through joint epoxy type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core all as specified and directed. Make : Denson, Raycom
Supply and joint cable jointing kit straight through joint epoxy type of size 70/95 sqmm 3.5 all as specified and directed. Make : Denson, Raycom
Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.
S&F in repairs metal box MS enclosure made out of CRCA sheet 3.00mm thick of size 450mm x 450mm x 250mm depth with three phase aluminium bus bar and fixing 3P 100A MCCB mounted on epoxy insulators, fixing arrangement with suitable MS Clamps all as specified and directed.
Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc. 25cm all as specified and directed by Engr-in-Charge.
Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point all as specified and directed.
Plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for coaping of pole as specified by Engr-in-charge.
Plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation of poles etc all as specified.
M&L Earthing with 600X600X6 mm thick , galvanised steel earth plate electrode buried vertically in ground (Earth pit not less than 2.25 meter deep below normal ground level ) with top edge of plate vertically at a depth ,not less than 1.5 m below ground level in any type of soil connected to and including GI strip of size 32X6 mm by means of bolts,nuts,check nuts, And washer of galvanised steel, Gi shrip to be provide upto the extent of 7.5 m GI strip to be duly connected to metalic bodies of HT/LT equipment with provision of mixture of charcoal dust & common salt packed all ground the earth plate upto MS funnel with wire mesh provided inside concrete earth pit for watering arrangement,complete all as shown on electrical plate no.3 of SSR Part I (2020) and testing on completion.
M&L Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth in any type of soil work complete all as shown in electrical plate No-5 of SSR-1991 (part-I)
SUPPLY & FIX PVC junction box of size inside dimenssion 250x200x105 mm complete with industrial connector and suitable size of MCB , including clamp made out of MS flat iron 30x5 mm , connection from junction box to street light fitting as specified & directed
Taking down of street light bracket including clamps of any type/any size from pole/wall including necessary nuts & bolts as directed complete all as specified and directed.
M&L for fabrication and installation of GI pipe bracket made of medium frade tubing of size 40mm dia duly bended by hot forging after filling of sand, length 1.20 mtr including two pairs of MS flat strip clamps 30 x 5mm with GI bolts, nuts and washers complete all as specified and directed.
M&L for scrapping the existing deterioted old alumininum paint by iron brushing and painting of steel tubular poles of 9 mtr length with one coat of metal primer and two coat of aluminium paint over exposed portion of pole above PCC coping including cross arms, angles, nut, bolts, clamps and S&F new radium sticker Radium paint / sticker of different colour 80 cm above coping of pole, i.e. alernatively with sky blue / red & white radium sticker (10 cm - 04 sky blue / red strip and 10 cm - 04 white strip) complete circumference of any type any shape pole and cement base paint on coping portion, marking of pole nos with radium yello / black paint /steekar in round shape 15 cm dia with letter writing 5 cm height 5 mm width etc. complete all as specified and directed at site.complete all as specified and directed at site by Engineer-in-Charge
Taking down old burnt /unserviceable MCCB and S&F MCCB 100 Amps TP, 415 V with thermal magnetic setting 16 KA capacity , fixing to suit in repair with fixing arrangement in the existing LT panel board complete
Taking down old burnt /unserviceable MCCB and S&F MCCB 160 Amps TP, 415 V with thermal magnetic setting 16 KA capacity , fixing to suit in repair with fixing arrangement in the existing LT panel board complete
Taking down old burnt /unserviceable MCCB and S&F MCCB 200 Amps TP, 415 V with thermal magnetic setting 16 KA capacity , fixing to suit in repair with fixing arrangement in the existing LT panel board complete
Taking down old burnt /unserviceable MCCB and S&F MCCB 250 Amps TP, 415 V with thermal magnetic setting 16 KA capacity , fixing to suit in repair with fixing arrangement in the existing LT panel board complete
Supply & fix in replacement PVC insulated 2 core 1.5 sqmm multistranded Copper conductor on pole for security light from junction box to street light fititng including making necessaey hole on surface of pole for insertion of 3 core pvc cable inside the pole upto street light fitting as specified & directed. etc complete all as specified and directed.
Supply and fix in repairs 45 watt Invertor LED Street light with PDC housing, IP 66 and inbuilt battery backup with auto ON/OFF and dimming option all as specified and directed by Engr-in-Charge.Make : Halonix cat part No LED SL HLSLD-ML04-45CWL-INV-DIMM-RTC-R or equivalant to Crompton/Havells
Taking down of faulty LT underground cable of size upto 3.5 x 25 sqmm from trenches/pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete : Note : Excavation/Earth work and cable jointing & jointing kit shall be measured and paid for separately under relevant item of schedule .
Taking down of faulty LT underground cable of size above 3.5 x 25 sqmm upto 150 sqmm from trenches/pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete : Note : Excavation/Earth work and cable jointing & jointing kit shall be measured and paid for separately under relevant item of schedule .
Material and labour for painting /Repairing with welding including change of hinges of LT pannel board/ LT feeder piller box, indoor/out door type any size/capacitywith smoke gray colour synthetic enamel paint one coat over the existing paint after cleaning and removing the dust and durt and cleaning with sand paper complete including writting letters 100 mm height with white synthetic enamelled paint complete with PCC work all as specified and directed at site.
DURGAI ELECTRICALS
UNITED ENTERPRISES
sapana enterprises
Santhi Enterprises
SHRI SWAPNAYOG ENTERPRISES
Auto Traders
M/s Prem Associates
NARMARAJ ELECTRICALS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .