SPECIAL REPAIR TO ROOF AND EXTERNAL PLASTER TO BLDG NO P-82 AT 12 BRD, AF AND CERTAIN MINOR WORKS UNDER GE (AF) TUGHLAKABAD

Amount

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in patches in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. (100+20)

M&L for Rendering 5mm thick in pathes in cement mortar (1:3) on ceiling even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of Oil bound distemper on new surfaces of wall over 3 mm thick wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparation of new undecorated surfaces and apply three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge. (50+4.50)

M&L for cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1) by weight complete all as specified and directed by Engr-in-charge.

Roughening the concrete surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc. including removal of old treatment of any description and removing the debris to a distance of not exceeding 50 cm away from plinth protection complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:4) using water proofing compound @ 3 % by weight of cement over concrete surface complete all as specified and directed by Engr-in-charge. Note:- Water Proofing Compound shall be measured separately.

M&L for APP based polymeric membrane minimum weighing @ 3 Kg/Sqm & minimum thickness 3mm, reinforced with plysester non woven fabric (Wt not less than 150 Gms/Sqm) laid on primed surface by forced application complete all as specified and as per manufacture instructions. (700+9)

Supply only water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in roof, kerbs or mud stops rounded or chamfered on edges complete all as specified and directed by Engr-in-charge at site.

M&L for washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster 1:4 (1 cement:4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 white cement:1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the white marble stone chippings complete all as specified and directed by Engr-in-charge. Note: Payment for providing grooves shall be measured and paid separately under relevant item.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as per specifications and direction of the Engr-in-charge.

Disconnecting existing tanks exceeding 250 ltr and not exceeding 500 ltr setting aside (or lowering if required) for repairs, cleaning etc. an hoisting if required reconnecting and refixing in position complete all as specified and directed by Engr-in-charge.

S&F anodized aluminium snap grid frame work for false ceiling complete all as specified and directed by Engr-in-charge.

S&F perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid complete all as specified and directed by Engr-in-charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-charge.

S&F lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of Oil bound distemper on new surfaces complete all as specified and directed by Engr-in-charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed by Engr-in-charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out complete all as specified and directed by Engr-in-charge. (4+16.2)

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-charge. (4+5)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engr-in-charge. (1.50+11)

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mess cement concrete sub base floor complete all as specified and directed by Engr-in-charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engr-in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and directed by Engr-in-charge.

M&L for RCC (1:2:4) (Nominal mix) type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

M&L for RCC (1:2:4) (Nominal mix) type B-1 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.

M&L for Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

All as per Sl item No 31.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in cement mortar (1:4) on fair face of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:4) of cement over concrete surface on ceiling complete all as specified and directed by Engr-in-charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

All as per Sl item No 34.00 but Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

M&L for preparation of new surfaces of wall plastered or un-plastered and apply three coats of white wash on wall complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of cement base paint on new surfaces of wall over a coat of primer complete all as specified and directed by Engr-in-charge.

M&L for Sand filling under floors or in foundations including watering and consolidation, spreading and levelling in layers not exceeding 25 cm thick well ramming complete all as specified and directed by Engr-in-charge. (1+4.86)

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection/path etc finished the surface even and smooth fair complete all as specified and directed by Engr-in-charge.

M&L for broken bricks Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base floor etc complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:6) with a mixture of water proofing compound @ 3 % by weight of cement on dried concrete surface finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge. Note:- Water Proofing Compound shall be measured separately.

M&L for point wiring complete for followings with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed 1100 Volts grade conforming to IS-694 drawn in and including concealed PVC rigid conduit with all fittings medium grade ISI certified IS-9537 Part-3 and terminated into pressed steel metal flush boxes suitable for modular accessories and modular cover plates with frame for mounting switches, socket regulator, bracked and PVC insulated FRLS copper conductor cable of size 1.5 Sq mm as earth wire, connected to common earth dolly complete all as specified and as directed by Engr-in-charge. Notes: The works includes cutting of chases and making good disturbed surfaces and rate deemed to included in quoted rate.

One Light point controlled by one way switch. (4+1)

One fan point controlled by one way switch and fan regulator.

One 3 pin socket outlet point 5 Amp on independent board. (2+1)

One bell/buzzer point controlled by one bell push button on the same board.

One 3 pin socket out let 15 Amps on independent board, with cables size 4.0 Sq mm and earth wire 4.0 Sq mm complete all as specified and as directed by Engr-in-charge. (2+1+2)

M&L for modular switch 1 way 6 Amps 1 module, suitable for 230 Volts AC supply complete all as specified and as directed by Engr-in-charge. (8+1)

M&L for modular switch 1 way 16 Amps 1 module, suitable for 230 Volts AC supply complete all as specified and as directed by Engr-in-charge. (2+1)

M&L for Modular Bell push 6 Amp one module suitable for 230 Volts AC supply complete all as specified and as directed by Engr-in-charge.

M&L for modular socket outlet 2 in 1, 5 pin, 6 Amps, 2 module complete all as specified and as directed by Engr-in-charge. (2+1)

M&L for modular socket outlet 2 in 1, 6 pin, 6/16 Amps, 2 module complete all as specified and as directed by Engr-in-charge. (2+1)

M&L for modular fan regulator step type 120 Watt, Two module type complete all as specified and as directed by Engr-in-charge.

M&L for ceiling rose surface bakelite 3 terminal complete all as specified and as directed by Engr-in-charge. (2+1)

M&L for multi msical door bell, AC 230 Volt SP fancy colour complete all as specified and as directed by Engr-in-charge.

M&L for sub main wiring with single core multistranded FRLS copper conductor flexible insulated (unsheathed) cable size 2x2.5 Sqmm and 1x1.5 Sqmm as in continuous earth wire and connected to earth dolly drawn in and including PVC conduit of 20 mm dia ISI marked with fittings and fixing accessoried laid concealed including necessary making good the disturbed surfaces in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. Note: The work includes cutting of Chassis not exeeding 4 cm girth and 4 cm width and making good the disturbed surfaces and rates shall be included in quoted rates.

S&F LED down lighter 2'x2' of 35 Watt complete all as specified and as directed by Engr-in-charge.

M&L for MCB single pole, 240 Volt, 'C' curve of 10 kA capacity of 10 Amps complete all as specified and as directed by Engr-in-charge. (5+2)

M&L for MCB single pole and Neutral, 240 Volt, 'C' curve of 10 kA capacity of 40-63 Amps complete all as specified and as directed by Engr-in-charge. (2+1)

Supply, laying and testing of XPLE cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, Heavy duty 1100 Volt grade with stranded aluminium conductor of size 10 Sqmm 4 Core complete all as specified and as directed by Engr-in-charge.

M&L for sub main wiring with single core multistranded FRLS copper conductor flexible insulated (unsheathed) cable size 2x6 Sqmm and 1x6 Sqmm as in continuous earth wire and connected to earth dolly drawn in and including casing, caping, PVC conduit of 25 mm dia ISI marked with fittings and fixing accessoried laid concealed including necessary making good the disturbed surfaces in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. Note: The work includes cutting of Chassis not exeeding 4 cm girth and 4 cm width and making good the disturbed surfaces and rates shall be included in quoted rates.

S&F LED tube light along with fixture of 20 Watt capacity complete all as specified and as directed by Engr-in-charge.

M&L for MCB distributiohn board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar and din rail conforming to IS-13032/IS-8623 SPN, 4 way, double door type complete all as specified and as directed by Engr-in-charge. (1+1)

Supply, laying and testing of XPLE cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, Heavy duty 1100 Volt grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core complete all as specified and as directed by Engr-in-charge.

Supply and laying in trenches well burnt subclass 'B' bricks locally available of size 23cmx11.5cmx7.5cm (+ tolerance) for cable protection of underground cable complete all as specified and directed by Engr-in-charge.

M&L for drilling hole under hard standing/road for laying of pipe for protection of cable etc by means of manual bookle and without distrubing the top surface and making good the distrubed surfaces if any complete all as specified and as directed by Engr-in-charge.

Supply and laying GI pipe light grade of 80 mm bore complete all as specified and as directed by Engr-in-charge.

S&F MCCB of 63 Amp 3 Pole, 50 Hz, 415 Volt, fixed type with breaking capacity 16 kA complete all as specified and as directed by Engr-in-charge.

S&F in replacement for sheet metal enclosure with two pin socket, chain plug cover with on MCB SP of 20 Amps capacity with alignment 10 kA 'C' series including electric connection complete all as specified and as directed by Engr-in-charge.

S&F MCB TP of 63 Amps rating 415 Volt, 10 kA, 'B' curve miniature circuit breaker (MCB) and 63 Amp current carrying capacity in DB complete all as specified and as directed by Engr-in-charge.

M/S PRADEEP ENTERPRISES

M/S RK Builders

M/s R P Enterprises

M/S AKASH CONSTRUCTION COMPANY

SK Engineers

J.P. Enterprises