Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹23.0 CrAdmitted-Finance AT PO PS PANIKOILI DIST JAJPUR ODISHA PIN 755043 | PANIKOILI | JAJPUR | ODISHA | 755043 | L1 | Admitted-Finance | ||
| 2 | Rejected-Technical FLAT NO 104 1ST FLOOR MALATI MANSION NILADRI VIHAR CHANDRASEKHARPUR BHUBANESWAR ODISHA PIN 751021 | KHORDHA | ODISHA | 751021 | - | Rejected-Technical Non-responsive | ||
| 3 | Rejected-Technical | - | Rejected-Technical Non-responsive |
Tender Value
₹23.0 Cr
Closing Date
19 Sept 2022, 5:30 pmClosed
Chief Engineer, DPI and Roads, Odisha
Office of the E.I.C. Civil, Odisha, Nirman Soudha, New Building, Unit-V, Bhubaneswar
Construction of RCC Retaining wall alongwith sand filling on the road from NH-5 to Ardalua from 10/250 to 11/535 km in the district of Jajpur under State Plan
2022_EICCL_80594_1
CE-DPI AND R-13/2022-23
Open Tender
Civil Works - Roads
Percentage
270 days
In Jajpur Dist
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
Exempted
14 Nov 2022
19 Aug 2022
20 Sept 2022
19 Aug 2022
19 Sept 2022
19 Aug 2022
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in all kinds of soil for road works with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers as per drawing and technical specification, including setting out, dressing of section to correct line, level, grade & camber for road work or dressing of sides and bottom for foundation of structures and loading into tippers, transporting to embankment site within all lifts and lead upto 1000mtr. and utilising the surplus earth locally for road work wherever required, backfilling the excavation earth to the extent required etc complete in all respect as per clause 301 & 304 of Specification for road & bridge work of MORT&H (5th Revision) & Direction of Engineer in charge. | - | Cum | 42.46 | - |
| 2 | Providing, filling clean sand of approved quality in road work for construction of drainage layer and foundation trenches of structures in uniform layers, watered and rammed/ compacted as per approved drawing and technical specifications complete in all respect as per Section 900, 2100 and Clause 401 & 304 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | 0.29 | Cum | 276.61 | ₹80.22 |
| 3 | Providing and laying P.C.C M-15 grade in foundation as per approved drawing and technical specifications complete in all respect as per Section 900, 1000, 1500, 1700, 2100 & 2900 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | - | Cum | 4,270.5 | - |
| 4Providing and laying R.C.C M-30 grade with crushed stone aggregates to 20mm nominal size mechanically mixed placed in foundation and compacted by vibration including curing with dewatering & form work as per approved drawing and technical specifications complete in all respect as per Section 900, 1000, 1500,1600, 1700 & 2700 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | |||||
| 4.01 | In foundation | - | Cum | 5,344.4 | - |
| 4.02 | In Sub-structure | - | Cum | 7,283.39 | - |
| 5 | Providing weep holes in abutment, wing wall, retaining wall, toe wall and RCC drain etc with 100mm dia A.C. pipe as per approved drawing and technical specifications complete in all respect as per Section 2200 & Clause 2706 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | - | RM | 92.25 | - |
| 6 | Supplying, cutting, bending, binding, straightening, placing HYSD bars confirming to grade IS:1786-(Fe-500) for steel reinforcement works for finished item of work as per approved drawing and technical specifications complete in all respect as per section 900,1000 & 1600 of MoRT&H specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | - | Qntl. | 8,684.15 | - |
| 7 | Providing and laying of filter media/metal spall backing using 45mm size crushed hard granite stone aggregates to the required thickness with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall and return wall of CD works to the full height compacted to a firm condition as per drawing and technical specifications complete in all respect satisfying the requirements laid down in Clause 2504.2.2 and Section 900 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | - | Cum | 1,656.64 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.18 MB
DTCN_RCC_Retainingwall.pdf
Tender Documents • 0.62 MB
BOQ_408027.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .