PROVN OF TOILET WITH URINALS AND CONNECTED WORKS NEAR BLDG NO P03 AND P22, ADDN / ALT OF ENTRANCE GATE OF BLDG NO P57, PROVN OF INTERLOCKING TILES AT VARIOUS PLACES AT MILITARY STATION NOWGONG, PROVN OF 10 X EXHAUST FANS FOR TOILET BLOCK AT OTM ACCN,

Amount

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation, etc or for the shafts, well, cesspits, manholes, pier holes, etc not exc 10 Sq m on plan and not exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Excavation over areas not exc 1.50 m in depth for foundation etc & getting out in any type of soil complete all as specified and directed.

Removing excavated mtrl and not exc 50m and depositing where directed at a level not exc 1.5m above starting point as in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Spreading and leveling of soft/loose soil in floor in layers not exc. 25 cm thick including well ramming and watering as required complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base etc complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

cutting into existing manholes for connecting new drains pipe of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finish complete all as specified and directed.

M & L for Cement concrete in foundations, filling and mass-concrete type D2 1:4:8 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for Brick work with flyash bricks (Old size), straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6 complete all as specified and directed.

M&L for Brick work with Flyash bricks (Old size), straight or curved on plan to any radius in half brick thick wall built in cement Mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick cement concrete type D2 1:4:8 (40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile, laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles invertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tile with and including 10 mm thick rendering in CM (1:4) for receiving the tiles complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 in plinth protection finished even and smooth without using extra cement including forming joints and filling with bituminous filler material at 1.5m interval complete all as specified and directed.

M & L for Formwork to sides of Flat & Rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L for Formwork to sides and soffits of Flat & Rough finished surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L for Formwork to sides of Square or rectangular & Rough finished surfaces of concrete pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

M & L for Formwork to soffits of Flat & Rough finished surfaces of concrete suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 24 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for Rendering 10 mm thick on fair faces of brick or concrete surfaces (for top surface of RCC roof slab) in cement mortar 1:6 mixed with liquid WPC 200ml per bag of cement for finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC will be measured and paid separately).

M & L for Rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 for finished fair and even complete all as specified and specified.

M&L for rendering in 15mm thick in two layers 10 mm thick rendering in cement mortar 1:6 and 5mm thick in CM 1:4 mixed with liquid WPC @ 200 ml per bag of cement on fair faces of brick work or concrete surfaces of walls finished surface even and smooth without using extra cement complete all as specified and directed. (Note:- WPC will be measured and paid separately).)

M & L for Rendering 5 mm thick on fair faces of brick or concrete surfaces (for ceilling surfaces ) in cement mortar 1:4 mixed with for finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound ISI marked complete all as specified and directed.

M & L Preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surface and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered surfaces complete all as specified and directed .

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 15 mm bore concealed type stop cock fancy type,chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F for 15 mm bore angle cock CP fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm bore Brass CP Splash Health Faucet with 1 mtr SS tube & hook screwed down for iron pipe and fixed, complete all as directed.

S&F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F 15 mm bore Brass CP kitchen wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F 15mm bore long body bib tap CP fancy type cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm dia pillar taps cast copper alloy chromium plated complete all as specified and directed.

S&F towel rail 20mm dia 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all as specified and directed.

S&F 125 mm aluminium alloy handles, cast type anodised complete all as specified and directed.

S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, handle and steel peg stay complete all as specified and directed.

S&F 3.00mm thick figured glass, pin head type and glazing with oil putty in square n exec 0.5 sqm in each pane complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.

S&F for 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed.

S&F Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and CP waste coupling complete all as specified and directed .

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling, complete all as specified and directed .

S&F Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests incl PVC (SWR) P trap 110 mm dia complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (including bolts, PVC (SWR) P trap 110 mm dia, Jet spray and all other connected items)complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including bolts, PVC (SWR) P trap 110 mm dia, Jet spray and all other connected items)complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F PVC flexible waste pipe suitable for wash hand basin /kitchen sink/ urinal complete all as specified and directed.

Supply and fix urinal spreader of stainless steel for fixing with 15 mm dia pipe (Min weight 60 gms) complete all as specified and directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and directed.

S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 32 mm bore waste coupling of (half of full thread) (Min weight 45 gms each) complete all as specified and directed.

S/F 75 mm PVC SWR pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S/F 110 mm PVC SWR pipe single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S/F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S/F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

Cutting into existing manholes for connecting new drains pipe of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for 150 mm dia salt glazed stoneware drain pipe laid in trenches and jointed ( including hunching , benching, and pcc bed 1:4:8) complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm internal dia of pipes complete all as specified and directed.

M&L for 150x100 mm dia salt glazed stoneware gully trap, square or round mounted, type "P" complete all as specified and directed.

S&F in of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.

S&F SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part- I.

Demolition of brick work or stone boulders masonry but built in cement mortar including at quoins pillar etc complete all as specified and directed.

M&L 20mm th granite ( for any type ) work in steps jambs, pillar window cill, kitchen platform and like incl CM (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe-410-S complete all as specified and as directed by the Engineer-in-Charge

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-

One light point / exhaust fan point controlled by one switch

One 6A socket point controlled by one switch on same board

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

S&F exhaust fan of 300 mm sweep size, heavy duty type, double ball bearing complete with and incl self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 volts single phase, 50 Hz, AC supply and fixed by using 4 Nos 50 mm long MS fasteners, nuts & washers and making all electric connection with three core PVC insulated, PVC sheathed copper conductor flexible cable 24/0.2 mm complete all as specified and directed. Note : 1. The cost of making hole in the existing wall and making good the disturbed surface of wall/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required is deemed to be included in the quoted rate.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 1.5 sqmm + 1 run x 1.5 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge.

Notes for Item No 96.00 & 97.00 (i) Three runs of copper cable and one run of PVC conduit shall be measured as one unit length (ii) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (iii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure.

Supply, installation & testing of Electric Water Heater storage type, vertical, 25 Liters capacity, minimum 3 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temparature setting and mild steel inner tank and outer body suitable for operating on 230V, 50 Hz, single phase AC supply including hot & cold water PVC connections and mounting on wall with suitable size & No. of anchor bolts complete all as specified and directed.

Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.

S&F MCB SP 06 to 32 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.

Material & Labour for Power Cables, Aluminum Stranded Conductor XLPE Insulated Of size 10 Sqmm 2 core, Cores laid up, PVC Inner sheathed, Armoured with galvanized wire or galvanized steel strip, overall PVC Sheathed, 1100V Grade as per IS 7098(Part 1) 1988 complete laid in trenches / floors / fixed to poles / walls / drawn through pipes etc including provn of lugs, glands, nuts, bolts & washers etc for connecting in LT feeder pillar box / transformer bushings / connecting overhead lines with suitable binding wire and testing on completion complete all as specified and directed by Engineer-in-Charge. (Note: Excavation, earth work and protection pipe etc shall be measured and paid separately under relevant items of schedule.)

Supply and connect PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts grade, conforming to IS 694, three core, 1.5 sqmm for connecting from junction box to Post top lantern light fitting including PVC conduit pipe through RCC column upto light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED Post top light fitting 40 Watt made in die-cast aluminum housing with decorative clear opal acrylic diffuser, IP 65 protection, spun aluminum powder coated canopy, low power Warm White (WW) LEDs connected in series and parallel combination with better heat dissipation arrangement with LED color temperature- 3000K ±300K, Highly efficient constant current electronic driver having operating voltage range from 140-280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 5KV complete suitable for up to 60mm OD pipe entry with fixing bolts and GI pipe fixed in RCC structure for mounting fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix thermoplastic cable junction boxes of size 130 x 180 x 77, IP 65/66 with metric knockouts for cable entry including cable terminal connector and fixing on posts / poles with suitable clamps, nuts & bolts etc complete all as specified and directed by Engineer-in-Charge.

S&F of 9 W White LED retrofit lamp B-22 holder base with polycarbonate diffuser and heat sink, complete all as specified and directed.

Supply and fix LED batten with CRCA sheet steel body box type pre-wired suitable for and including provision of 1x20 Watt (4 feet) retrofit LED tube with PC body, full white and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia light grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

Supply,laying, testing and commissioning of under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 16 Sq mm 2 core, with aluminium conductor, ISI marked as per IS : 7098( Part-1) along with suitable size aluminium cable lugs and jointed in any description complete all as specified. (Note : Exc, earth work will be measured and paid separately under respective items)

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing alongwith fittings and connections of 100mm bore from trenches complete all as specified and directed. (Note : Exc, earth work will be measured and paid separately under respective items)

M & L for Ductile iron pipe with grade K-9 of 100mm dia size Socket and spigot ends ISI marked, with and including rubber gasket joint material for socket and spigot ends and for fittings and laid in trenches, complete all as specified and directed . Note : 1 The excavation & earthwork shall be measured & paid for separately.

M/L for fixing DI specials such as Ductile iron bends (any type, radius and angle), tapers (any type i.e straight, bend, increasing or decreasing or double socket etc) Tee pieces single barnch , 'Y' junction, double branch, cross, collar, caps, connecting pieces upto 100mm dia complete all as specified.

Soni Traders

M/s JS Constructions

HIMANSHU TRADERS

RAJ CONSTRUCTION