ESD/L-193/2021

Amount

Dismantling mild steel/ aluminium/ Gypsum partitions, doors, windows, fixed glazing, mild steel grills/mesh, false ceiling etc, including disposal of unserviceable material and stacking of serviceable material out side of IICT, Campus with in approved municipal grounds including loading and unloading for all leads&lifts involved as directed by Engineer-in-charge.

Demolishing plain cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. .

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos cement sheet

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.Note: Payment shall be measured as per the actual quantities executed vide items 2,3,&4

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622,of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including ceat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel crews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):Powder coated aluminium(minimum thickness of powder coating 50 micron) For Fixed portion

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including ceat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel crews, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,window,ventilator shutterrs and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the Architectural drawings and the directions of Engineer-in-charge cost of aluminium snap beading shall be paid in basic item With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing mineral fibre false ceiling tiles at all heights ofsize 595X595mm of approved texture, design and pattern. The tiles have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Steel work in built up tubular (round, square or rectangular hollow tubes,angles etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Purlins:M.S Box sections(80mmx40mmx3.2mm) Note: Use Tata Make (@5.50kg/m)

Electrical Items Point wiring in PVC conduit, with indicator modular type switch . Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed pvc conduit, with modular switch, modular plate, suitable G.I box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group - C

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required. Make:Finolex/Havells (i)3 x 2.5 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required. Make:Finolex/Havells 3 x 4 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required. Make:Finolex/Havells 5 x 6 sq.mm

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) 25mm

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required . 5/6A One way Switch, Indicator Type

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required 15/16A One way Switch,Indicator Type

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required 2pin & 3pin 5/6A socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required 6pin 15A/16A power socket outlet

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required. 12 module

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Single pole

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required Triple pole

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required Triple pole & Neutral

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of 20A, 240V, SPN Industrial type socket outlet with 2pole and earth, metal enclosed plug top alongwith 20A. C curve ,SPMCB ins heet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc., as required by the site Engineer.

Supply of 28watts ,1200mm BLDC ceiling fan sweep: 1200mm (48"), Rated Voltage:230V, Frequency:48-52 Hz, BEE Rating:5 Star Operating Voltage:140-285v single phase AC, Power factor:0.99, Air Delivery:235 CMM Rated power :28-30watts, Motor Speed :340 RPM with speed control , Bearing:Double Ball Bearing, Down rod size with rubber bushes:- 300mm , Operating temperaturewith in 2 degree of ambient ,warranty:-3 yrs on site, Speed control :- Regulator /Remote operation ,Report: The firm has to submit type test report from government accredited test labs like CPRI. Model:EFFICIO Sweep:1200mm (48") colour:White Make: Atomberg/Crompton / Usha/Orient

ITC Ceiling fan: Installation, testing & commissioning of ceiling fan including wiring the down rods of 1feet - 2feet length with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc., as required

Removing of existing Tubelight fixtures of all types /celing fans/ICTPN /Power boards/ MCBDBs and all electrical fixtures as directed by Engineer incharge.

Removing & Refixing of MCBDB: Removing of existing 12 way MCB Distribution board ,GI cable trays,including all cables wires connected to it , the existing MCBDB and all the cables are to be concealed by chipping and making good the same with sand and cement etc; The cables and wires are to be reconnected as directed by Engineer incharge.

Supplying & fixing of Ceiling rose,jumbo type on existing junction box as required. Make: Anchor

Supply of false ceiling recess mounted 600mmx600mm LED panel luminaire complete set including driver etc as directed by Engineer incharge. Specifications:Operating voltage 140v-270v AC input 50Hz, 26-30watts , 3000-3500 lumens,5700K-6500K,UGR<19,2x2 Panel, recess mounted suitable for Armstrong/Grid ceiling/POP, CRCA powder coated white after phosphochromate treatment, 595x595x70mm , opal polystyrene diffuser sheet with special glare cut film for UGR<19,UGR values below 19 at 4H*8H across and along the line of sight , Compliance to EN-12464-1 : Luminaire luminance <3000cd/m2 between 65-90 deg elevation angle, High efficiency long life LED package in integral module with System lumen efficacy of >110 lm/W, Powered by an independent Isolated, SELV Output electronics LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test, Supports 0-10V, DALI and POE,3400Lm,CRI>80,5700K-6500K, THD<10%,PF>0.95, IP20,IK03,Life class of 50,000 hrs @ L70,Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ, Internal Surge Protection:2.5 KV; Protection : Reverse Polarity, Open & Short Circuit, EMI/EMC compliance, driver safety requirement standards :is 15885-2-13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source, driver and fixture to be BIS certified. make:philips/Havells/Crompton/Trilux Warranty:5yrs from manufacturer

Installation,Testing & Commissioning of recess mounted LED luminaires with necessary chain supports in the existing false ceiling ,connections etc; as directed by Engineer incharge.

Supply of following XLPE aluminum armoured cable 1.1kV grade of size. Make:Glostar / Havells/Finolex 3.5C x 25sq.mm

Laying of following XLPE aluminum armoured cable in existing trench or on surface / recess including cutting the wall / floor , and making good the same with sand,cement etc; as required. 3.5C x 25sq.mm to 3.5C x120 sq.mm

Termination of the following sizes of PVC insulated Aluminium conductor armoured cable using glands, copper sockets, bolts & nuts etc., the gland to be earthed by 12 SWG copper wire to the nearest earth bus. i)3.5C x 25sq.mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

P/F 4mm copper earth wire with conduit/cable : Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

S/F 'C' series MCB: Supplying and fixing of 63A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.i)4 Pole 63A 10KA MCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Make:Legrand/L&T/ABB 8 way (4 + 24), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator) Make:Legrand/L&T/ABB 4 way (4 + 12), Double door

Labelling and Lettering of PDB / LDB of required font to suit the equipment with required coloured paint with elegant finishing as required by the Engineer incharge.

Labelling and Lettering of Switchboard/Power board of required font to suit the equipment with required coloured paint with elegant finishing as required by the Engineer incharge.

Y RAJA SHARMA

Tadem Reliable Services LLP

RAMI REDDY KAKU