GE I R AND D/CHD-23/2025-26 WELCOME MAINTENANCE AND PETTY REPAIRS IN MD AND OTM ACCN IN SECTOR- 24, 37, 38, 42 AT CHANDIGARH

Amount

Material and labour for preparing old treated wall surfaces by scraping, washing, rubbing down and stopping of distempered/ painted surfaces and applying one coat of oil emulsion distemper (OBD) on wall surfaces with roller and brushes complete all as specified and directed.

Material and labour for preparing old treated wall surfaces by scraping, washing, rubbing down and stopping of distempered /painted surfaces and applying two coats of oil emulsion distemper (OBD) on wall surfaces with roller and brushes complete all as specified and directed.

Material and labour for preparing old treated wall surfaces by scraping, washing, rubbing down and stopping of distempered / painted surface of any description over 10cm girth or width, applying wall care putty 2 mm thick (average thickness) of approved quality as specified in clause 15.19 of SSR Part-I and one coat of primer, finally applying two coats of oil emulsion distemper (OBD) with roller and brushes complete all as specified and directed.

Material and labour for preparing old treated ceiling surfaces by washing, rubbing down and stopping of distempered / painted surfaces and applying one coat of oil emulsion distemper (OBD) on ceiling surfaces complete all as specified and directed.

Material and labour for preparing old treated wall surfaces by washing, rubbing down and stopping of distempered and painted surface of any description over 10cm girth or width, not otherwise described and applying one coat of plastic interior emulsion paint with roller and brushes all as specified and directed complete all as specified and directed.

Material and labour for preparing old treated wall surfaces by washing, rubbing down and stopping of distempered and painted surface of any description over 10cm girth or width, not otherwise described and applying two coats of plastic interior emulsion paint with roller and brushes complete all as specified and directed.

Material and labour for preparing old treated wall surfaces by washing, rubbing down and stopping of distempered and painted surface of any description over 10cm girth or width, applying wall care putty 2 mm thick (average thickness) of approved quality as specified in clause 15.19 of SSR Part-I and one coat of primer, finally applying two coats of plastic interior emulsion paint with roller and brushes complete all as specified and directed.

Material and labour for preparing old treated ceiling surfaces by washing, rubbing down and stopping of distempered and painted surface of any description over 10cm girth or width, not otherwise described and applying one coat of plastic interior emulsion paint on ceiling complete all as specified and directed.

Taking down cement plaster/ loose tiles in small patches as per site requirement in any situation / location on brick or stone walls, RCC surfaces such as walls, ceiling, chajjas, beams, columns etc, (internally or externally) including raking out joints, hacking for key, scrubbing down with water, etc. and rendering 15 mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and treating the surfaces with existing finishes to match with existing up to G+5 floor buildings complete all as specified and directed. cost of scaffolding and all safety measures is deemed to be included in the rate

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Material and labour for reparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint. complete all as specified and directed.

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer in stair case railings and similar items complete all as specified and directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not otherwise specially provided for and removing all demolished material/debris up to 1.5 Km form the site and depositing where directed complete all as specified and directed.

Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded crushed stone aggregate as in sunken floor filling and mass concrete complete all as specified and directed.

Material and labour for water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen. WC, bath & toilet, etc. : 15 mm plaster in cement mortar (1:3) after roughening and cleaning the surface mixed with WPC as per manufacturer’s instructions shall be provided on sunken portion while the concrete is green (a) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membrane with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of approved complete all as specified and directed

Supply and fixing in repair vitreous china squatting pan ''Orissa pattern'' size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) with and including/CI floor trap necessary demolition and provision of cement concrete bedding complete all as specified and directed.

Material and labour for coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) of area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300MM X 300MM), in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:4 pointed in white or coloured cement to match the shade of the tile complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white with P or S trap with and including floor trap and pipe 100mm dia and provision of plastic seat cover complete all as specified and directed.

Supply and fixing wash hand basin, vitreous China, flat back, white of size 550X400mm, with and including PVC connection, CP pillar tap, CP waste coupling, PVC waste pipe, fixed to wall with suitable fasteners of adequate size and strength, fixed as in repair complete all as specified and directed

Material and labour for cleaning and removing all scale and dirt etc, from tanks exceeding 500 & n.exc 1000 ltr capacity of tank from mouths of circulating pipes with & including disconnecting & refixing in all respects including fittings such as tank nipple, elbow, socket etc along with provision of new float valve PVC 20mm dia complete all as specified and directed.

Supply and fixing for stainless steel fancy type curtain rods of 20mm dia. with suitable Number of stainless steel brackets & stainless steel knob as per site requirement Fixed in repair on complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.

Material and labour for 4mm thick ordinary quality cut to size glass panes (size of each pane ranging from 0.50 sqm to 1.50 sqm as ordered) with silicon of approved quality fixed including removing loose putty in any floor ie upto vth floor with and including requisite ladder or scaffolding and safety measures complete all as specified and directed

Supply only oil putty of approved quality complete all as specified and directed

Supply only 4mm thick ordinary quality cut to size glass panes (size of each pane ranging from 0.50 sqm to 1.50 Sqm as ordered) complete all as specified and directed

Material and labour in repair for 18mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape as in shutters for C.B., cabinets, drawers, shelves any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. Note :- Design and colour shall be approved by GE Make:- Bhutan Tuff India, Green Ply, Archid

Supply and fixing in repair 2nd class hard wood plain fillets sectional area exc. 6 sqcm n.exc. 13 sqcm clean sawn wrought, secured with nails and painting the surfaces with primer and synthetic enamelled paint complete all as specified and directed

Supply and fixing for 30mm width of flap continuous (piano) hinges MS bright finish or electrogalvanized complete all as specified and directed

Supply and fixing for stainless steel handle 100mm complete all as specified and directed

Supply and fixing for aluminium magnetic door catcher of suitable size for each shutter of cupboard complete all as specified and directed.

GOODWILL ENGINEERS (BID ID -3346844)