Road safety work of black spot on Najibabad Nagina via Nankar Bundki road.

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous cleaned with air compressor. Complete as per MORTH Vth Revision Specification Clause 503 For BC. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.50% by weight of total mix and filler, transporting the hot mix to work site, laying with a Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specfication Clause 505 complete in all respects. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH Vth Revision specification clause No. 507 (As per MORTH IVth Revision Specfication Clause 509) complete in all respects. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M-25. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. From the site of work and including watering, dressing etc. Rate to include cost of all materials labour T&P etc. required for proper completion work. (SOR Ch. no. 4 S.no. 255). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Road marking with hot applied thermo plastic compound with reflectorising glass beads on bituminous surface. Providing and laying of Hot applied thermoplastic compound 2.5 mm thick including reflactorising glass beads @ 500 gm per Sqm area. Thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. As per S.I. No. MoRTH-803 (8.13). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

(Reflective raised pavement markers(Cat eye/Road stud) Supply & Fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrite) or HIPS(Hi-inpact Polystyrene) of acrylonitirile buladiens styrene (ABS). The marker shall supported a load of 13635 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containging single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35+- 5 degree to base and area of each retro reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer dimensions of road studs should not be less than 100 mm x 100 mm x10 mm. @ 6 M interval. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Road Marking with Hot Applied Termoplastic Compound with Reftectorising Glass Beads in Bituminous Surface (Repeated Bar) Providing and Laying of hot applied Termoplastic compound 5 mm thick including reftectorsing glass beads @ 500 gma per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Direction and place Identiification Signe up to 0.90 Sqm size Board Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting the retro reflective sheeting type-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC-67:2012 & proof of the same in from of government report shall be uploaded while quoting tender, vide clause. 801.3 fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm. Supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm, below ground level as per approved drawing complete. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (i). 90 cm equilateral tringle with diffinitation plate size (20cm X 60cm). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (iii). 60 cm Circular with diffinitation plate size (20cm X 60cm). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (iv). 80mm x 60mm rectangular with diffinitation plate size (20cm X 60cm). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (vii). 90 cm high octagon. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (x). 30X90 cm Left/Right object Hazard. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting TYPE-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x 6 mm firmly fixed to the ground by means of properly dsignded foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & Proof of the same on form of Government report shall be uploaded while quoting tender. (xi). 45X90 cm two way object Hazard. Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Finishing Wall with one coat of water proof cement paint Weather coat of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour , Tools & plant etc required for proper completion of the work. Including cost of All material, labour cess, T&P, all taxes but excluding cost of GST.

Chequerred Precast Cement Concrete Tile 22 mm Thick in Footpath & Courtyard, Jointed with neat Cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc complete on 20 mm thick bed of Cement motar 1:4, Light shade pigment using white cement. (DSR. 11.20.1). Including cost of All material, labour cess, Royalty, T&P, all taxes but excluding cost of GST.

Please Enable Macros to View BoQ information