REPAIR TO OTM ACCN FOR CERTAIN UNITS UNDER AGE BR II AT AMRITSAR CANTT

Amount

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 2 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 1 shall be reused after necessary cleaning of mortar).

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 finishing fair and even without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:4 finishing even and smooth without using extra cement complete all as specified and directed

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar 1:3 finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered surfaces complete all as specified and directed.

Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered surfaces complete all as specified and directed.

Material and Labour for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 12 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 sqm complete all as specified and directed.

Taking down Shutter of any description of size not exc 1sqm each complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

Taking down Shutters of any description of size exceeding 2 sqm each complete all as specified.

Material and labour in repair for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty (i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf Note :- Hold fast PCC 1:2:4 type B0 (four No’s for Each window) as required and directed including finishing in cement mortar 1:3 as per existing shall be included in quoted rate. Painting shall be measured and paidfor separately.

Material and labour in repair for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-1019/08 dt 01.05.08 incuding cutting holes complete all as specified and directed as follows. (a) 3mm thick pin headed type glass sheet glazing with oil putty and Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesof appropriate size. Note:- Hold fast PCC 1:2:4 type B0 (four No’s for Each window) as required and directed including finishing in cement mortar 1:3 as per existing shall be included in quoted rate. Painting shall be measured and paidfor separately.

Supply and Fixing pressed steel frames 1.25 mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including filling chowkhats in PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in bed blocks for hold fast & similar work etc. incl necessary form work complete all as specified and directed

Supply and Fixing factory made IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Supply and Fixing in repairs Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed.

Supply and Fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels.

Material and Labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of surfaces complete all as specified and directed.

Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

Supply and Fixing 150mm long Aluminium handles, cast type anodised complete all as specified and directed.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets complete all as specified and directed.

Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty complete all as specified and directed.

Supply and Fixing Solid PVC Door Frame factory made of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and drawing complete all as specified and directed.

Supply and Fixing 28 to 30 mm thick factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and Fixing in repair powder coated aluminium frame for doors ,windows, ventilators, partition with one or more rebates including joining cleats, rubber neoprene packing for fixing ( Min. thickness of powder coating 50 micron) complete all as specified and directed.

Supply and Fixing in repair powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) complete all as specified and directed.

Supply and Fixing in repair Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. (Min. thickness of powder coating 50 micron) complete all as specified and directed.

Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified and directed.

Taking down aluminium door shutters of area n exc 1 sqm each in window and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified and directed.

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm complete all as specified and directed.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.

Supply and Fixing Brass mortice lock, 2 levers, verticle type, size 100 mm, complete all as specified and directed.

Dismantling structural steel work including doors, gates, framed truss, etc. complete all as specified and directed.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof/wall coverings complete all as specified and directed.

Supply and Fixing 2mm thick Fibre glass reinforced translucent corrugated/plain sheeting with side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete all as specified and directed.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of new surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing, including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply and Fixing glazed ceramic coloured designer tiles 450x300mmx6/7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in cement mortar 1:4 on brick surface complete all as specified and directed. Note: Colour and design of tiles as per approval of Engineer-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed.

Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and Labour for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with shade of marble including grinding, rounding to edges and polishing complete all as specified.

Supply and Fixing in repairs vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed.

Supply and Fixing in repair Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed.

Supply and Fixing in repair 10 Litre capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.

Supply and Fixing in repair Plastic water closet seat cover,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) complete all as specified and directed.

Supply and Fixing in repairs PTMT Jet spray suitable for EWC complete all as specified and directed.

Supply and fixing Chromium plated Health faucet in repairs with 1.5 metre long chain for 15mm bore pipe complete all as specified and directed.

Supply and Fixing in repairs vitreous China wash basin white,flat back size 550x400mm including PTMT waste coupling 32mm bore, waste PVC pipe, CP brass Pillar Tap 15mm bore of fancy type complete all as specified and directed.

Supply and Fixing in repairs glass shelve assembly 60cm long in oval shape consisting of 5.5mm thick glass including CP guard railing with double rails complete all as specified and directed.

Supply and Fixing in repair Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing complete all as specified and directed.

Supply and Fixing in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply & Fixing in repair vitreous china urinal half stall type with CP spreader white including CP waste coupling with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply and Fixing in repair Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor complete al as specified and directed.

Supply and Fixing in repairs 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and Fixing in repairs 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and Fixing in repairs of brass cromium brass plated fancy type bib tap 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed.

Supply and Fixing in repairs Pillar tap 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fixing in repairs PVC waste pipe 32mm dia fixed to WHB/Urinals complete all as specified and directed.

Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.

Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

Supply and Fixing CP (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down, necessary cutting chases and making good in cement mortar 1:3 complete all as specified and directed.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down, necessary cutting chases and making good in cement mortar 1:3 complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs, including cleaning for reuse and removal ; Complete all as specified and as directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including priming coat, cleaning surfaces etc ; Complete all as specified and as directed.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:4 and joints grouted and pointed flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement as the work proceed ; Complete all as specified and as directed.

All as per Srl Item No. 86 here-in-before but except brick tiles (using old serviceable brick tiles obtained from dismantling).

Disconnecting existing tank 1000 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tank 500 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Supply & Fixing in repair rotational moulded polythene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) tripled layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valve high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore and removal old material complete all as specified and directed.

Supply & Fixing in repairs rotational moulded polythene water storage tank of 500 litre capacity (cylindrical vertical with closed top) tripled layered, hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including removal old complete all as specified and directed.

Dismantling boarding including frame , any description , fixed in any position with screws complete all as specified and directed.

Supply and fixing 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to providing seam less finish including applying a two coats of distemper over a primer coat and prepration on surface complete all as specified and directed. (Frame work for ceiling shall be measured and paid for separately).

Material and Labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc.complete all as specified and directed.

Supply and Fixing in repairs PVC (SWR) pipe 75mm dia fixed in wall/floor complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed.

Supply and Fixing in repairs 75mm PVC (SWR) bends any radius complete all as specified and directed.

Supply and Fixing in repairs 110mm PVC (SWR) bends any radius complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) complete all as specified and directed

Material and Labour for Modular concealed existing point wiring for following point ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar 1:3 complete all as specified and as directed. Note : 1. Switches/sockets/regulators/lamp holders, ceiiling roses, regulators shall be measured and paid separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way.

b). For one three pin socket outlet 5 Amps independent board.

c) For one three pin 5 Amps socket outlet on the same board with other switches.

d) For one light point controlled by two way switch.

All a per item No 101 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.

Material and Labour for Modular surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar 1:3 complete all as specified and as directed for the following point (Switch/socket/regulator/lamp holder/ceiling rose/regulator shall be measured and paid for separately) :- a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way.

b). For one three pin socket outlet 5 Amps independent board.

c) For one three pin 5 Amps socket outlet on the same board with other switches.

d) For one light point controlled by two way switches.

All a per item No 106 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete all as specified and directed.

Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed.

Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified and directed.

Supply and fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed.

Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.

Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed .

Supply and fixing in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed comprising of following :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement MCB single pole 6 to 32 Amps complete all as specified and directed.

Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed.

Supply and fixing in replacement 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.

Supply and fixing in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps complete all as specified and directed (for AC and geyser).

Supply and fix,in repair Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan all as specified and directed. Notes: (i) Provisio for Making suitable opening for fixing exhaust fan if required shall be deemed included in the quoted rate of item. (ii) Old unserviceable material shall be deposited in store yard of MES.

Supply and fix in repair , Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Notes: (i) Provisio for Making suitable opening for fixing exhaust fan if required shall be deemed included in the quoted rate of item. (ii) Old unserviceable material shall be deposited in store yard of MES.

Supply and fixing in repair LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and fixing in repair LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.

Supply and fixing Iin replacement LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and fix in repairs SMD/PLUTO NEO LED luminare 36/40 watt 600 x 600 mm 220 V AC LED ceiling light recessed/surface type with high efficiency PMMA diffuser soft glass free light complete with driver ,holders and LED lamps stable for roof/ceiling including fixing arrangements and connecting with copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to light fitting complete all as specified and as directed.

Supply and fixing in repalacement decorative Ceiling light 12 watt light fitting LED type with accessories including any type complete all as specified and as directed.

Supply and fixing in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable allas specified and directed.cted and specified

Supply and fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit / one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including making good disturbed surfaces as required, complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit / one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including making good disturbed surfaces as required , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including making good disturbed surfaces as required , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Material and labour in repair for earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in electrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqmcomplete all as specified and directed.

Munish Kalia (BID ID -3378688)

S S CONSTRUCTION COMPANY (BID ID -3378729)

m/s. gopal krishan (BID ID -3369483)

RAJ KAMAL BUILDERS (BID ID -3378042)