REPAIR REPLACEMENT OF JOINERY AND WINDOWS OF CERTAIN BUILDINGS AND POST ATT AT NO 2 AND 3 DOMESTIC AREA UNDER AOR OF AGE B R I AT AIR FORCE STATION

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Note:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed by Engineer-in-Charge. Note :- All screws shall be self tapping chrome plated

Supply and fixing 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid PVC door frame single rebated of size 50X47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube in opening as per spd & drg complete all as specified and directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. Note:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement.

Taking down existing Cupboard shutter of any description and supply & fixing factory made 20mm thick solid WPC( wood particle composite) sheet one side UV printed( of pattern as approved by GE) and other side wood nature colour for cupboard/cabinet shutter of density 600 Kg/Cbm bent 90 degree including 100% termite/ water proof, fire redardent, eco friendly and finish at all edges at level etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair factory made 20mm mm thick solid WPC(wood composite) without prelam sheet having both side wood nature color for cupboard partition/slabs of density 600Kg/Cbm bent 90 degree including 100% termite/ waterproof, fire redardent, eco friendly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for heavy duty 20'' long telescopic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Continuous (piano) hinges,mild steel, bright finish Width of flapsequal to shutter thickness complete all as specified and directed by Engineer-in-Charge.

Material and labour for 0.80mm thick PVC edge binding tape around the 18 to 20mm thick PVC shutter, edge color as directed complete all as specified and directed by Engineer-in-Charge.

Material and labour high quality magnet catcher for cupboard shuttter, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 50mm dia polished hardwood knobs fixed with screws, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel multipurpose universal furniture drawer cupboard cabinet lock with two keys ccomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm long (12Gauge) butt hinges stainless steel anodised and fixed complete all as specified and directed by Engineer-in-Charge. Note :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fixing 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair with screws or welding, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate and complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Handel of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Drapery curtain rod of stainless steel 20mm dia complete with bracket heavy duty and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw and disturbed area to be made good with existing finishes complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Stainless steel rod for cupboard shutter for hanging cloth including two nos braket of approved quality complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium door seal up to 1200mm long best quality complete all as specified and directed by Engineer-in-Charge.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge.

Material and labour for Easing of steel window shutters area not exc 2 Sqm each , including adjusting greasing/oiling to easy opening and closing complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge.

Material and labour for Re securing or easing and adjusting without taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples, in steel or wooden windows/doors with wooden beads or at any place and situation complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 3mm thick sheet glass ordinery quality and glazing with oil putty with pin in square n exc. 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Material and labour preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge including taking down aluminium door shutter and refixing.

Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated design No2 universal type suitable for door shutter complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing and injecting chemicals emulsion for post constructional Antitermite Treatement Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre complete all as specified and directed by Engineer-in-Charge.

JAGDISH SINGH ASSOCIATES (BID ID -3324669)

Vijay Kumar Contractor and Engineers (BID ID -3324004)