RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Automatic Optical Level ( 30 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) PERFORMANCE Parallel Plate Micrometer Without Without Accuracy (Standard Deviation per 1 km 1.5 0.7
Required1
Required1.2
Required1.5 Or lower 1/12 double - run levelling)
Requiredwithout Micrometer Accuracy (Standard Deviation per 1 km double - run levelling)
Requiredwith Micrometer (May indicate '0' for without micrometer) 0.5 mm 0.5 mm
Required0.4 mm
Required0.3 mm Or higher Circular Vial (Bubble) Accuracy (per 2 mm) 8 8.0 Multiplication Constant 100 * Additive Constant 0 * Reticle Illumination No No Graduation on Horizontal Scale Circle 360 degree 360 degree "Graduation Interval (Better Than or Equal to)" 1 degree 1 degree OPTICS Magnification (in X) 30 30
Required32
Required36
Required40
Required34 Or higher Telescope Image Erect * Gas - filled Telescope No * Objective Lens Aperture 30 30.0 Field of View 1˚20' 1˚20' Minimum Focus Distance from the center of the Instrument 0.3 0.3 Or lower COMPENSATION Compensator Magnetic - damped Compensator with Automatic compensation Magnetic - damped Compensator with Automatic compensation Compensator Range (±) 15 15
Required16
Required30 Or higher Compensator Setting Accuracy 0.3 0.3 Or lower SALIENT FEATURES Salient Features With Peep Sight
RequiredWith Gun Sight
RequiredWith 2-Speed Focusing Knob
RequiredWith Cross-line Reticle pattern
RequiredWith Wedge type Reticle pattern
RequiredNot Applicable With Peep Sight
RequiredWith Gun Sight
RequiredWith 2-Speed Focusing Knob
RequiredWith Cross-line Reticle pattern
RequiredWith Wedge type Reticle pattern
RequiredNot Applicable 2/12 ACCESSORIES Accessories inclusive in the scope of supply Lens Cap
RequiredPlumb Bob
RequiredVinyl Rain Cover
RequiredS unshade
RequiredCleaning Cloth
RequiredAllen keys
RequiredAdjustment Pin
RequiredUser Manual
RequiredCarrying Case Lens Cap
RequiredPlumb Bob
RequiredVinyl Rain Cover
RequiredSunshade
RequiredCleaning Cloth
RequiredAllen keys
RequiredAdjustment Pin
RequiredUser Manual
RequiredCarrying Case GENERIC Weight - * Dimensions (Size) (mm X mm X mm) - * ENVIRONMENTAL CONDITIONS Minimum Operating Temperature -20 -20 Or lower Maximum Operating Temperature 50 50.0 Ingress Protection IP 55 IP 55
RequiredIP 56
RequiredIP 57 Or higher WARRANTY WARRANTY 1 1
Required2
Required3
Required4
Required5 Or higher CERTIFICATIONS Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove conformity to the specification No No If Yes
RequiredTest Report to be furnished to the Buyer on demand NA * Test Report No and Date - * Name of the Lab and Address - * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.