Loading
Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹5.8 L
Closing Date
22 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' Whichever is less; where. V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per ANNEXURE-XXXIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Trenching,Cable laying,Location and /or signal foundation/erection/termination/wiring in connection with any signalling work
8 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender document, Scope of work & GCC 2022 are attached with the tender.
Signaling work in connection with Fencing work in KALYAN - KARJAT - LONAVALA and KARJAT - KHOPOLI section in Mumbai division.
CR-BB-SNT-NORTH-2026-50
CR-BB-SNT-NORTH-2026-50
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹5.8 L
22 Jun 2026
21 May 2026
8 Jun 2026
52 items across 1 schedule · ₹1,38,60,036.03 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of polyolefin cable channel 2434 with following dimensions, height (internal/external) 155/230mm x width 240mm/340 mm x length 1000mm with suitable detachable cover having fire protection class K1 in accordance with DIN 53438 part 2 and electrical characteristic Dielectric strength 48KV/cm in accordance with DIN VDE 0303-21 (As per annexure)for laying of all types of S&T cables.(Inspection Agency RITES) | Metre | 200.00 | 2,501.18 | 5,00,236 |
| 2 | Wheel sensor with protection tube of Frauscher make MSDAC type Rsr 180 (with BBIK- M 12 GS05 fixing along with cable length of 5 mtr (GS05). (Inspection Agency RDSO) | Numbers | 3.00 | 1,80,693.26 | 5,42,079.78 |
| 3 | Wheel sensor with protection tube of Frauscher make MSDAC type Rsr 180 (with BBIK- M 12 GS05 fixing along with cable length of 10 mtr (GS05).(Inspection Agency RDSO) | Numbers | 1.00 | 1,87,140.19 | 1,87,140.19 |
| 4 | SIC CARD FOR FRAUSCHER MSDAC ACS 2000. FRAUSCHER Make.(Inspection Agency RDSO) | Numbers | 3.00 | 57,761 | 1,73,283 |
| 5 | "Supply of Axle counting Board ACB 120/ACB 130 type suitable for Frauscher MSDAC system as per RDSO Specification No. RDSO/SPN/176/2013(Version 3) or latest(Inspection Agency RDSO)" | Numbers | 2.00 | 1,77,344.56 | 3,54,689.12 |
| 6 | "Power Supply Board PSC101 RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC(Frauscher make)(Inspection Agency RDSO)" | Numbers | 2.00 | 90,270 | 1,80,540 |
| 7 | "Input/Output Board IO-EXB, Part No. 20864 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC (Frauscher make) (Inspection Agency RDSO)" | Numbers | 2.00 | 1,30,390 | 2,60,780 |
| 8 | IMC CARD FOR FRAUSCHER MSDAC ACS 2000. FRAUSCHER Make.(Inspection Agency RDSO) | Numbers | 2.00 | 1,95,774 | 3,91,548 |
| 9 | Supply of Serial I/O card for Eldyne make MSDAC (Thales make) as per RDSO specification RDSO/SPN/176/2013 ver 3 & manufacturer specification (Part no 3 CR 01881RAA)2(Inspection Agency RDSO) | Numbers | 2.00 | 89,467.92 | 1,78,935.84 |
| 10 | PARALLEL Card for Eldyne make MSDAC (Thales make) as per RDSO Specification No. RDSO/SPN/176/2005 or latest(Inspection Agency RDSO) | Numbers | 2.00 | 78,422.2 | 1,56,844.4 |
| 11 | PDCU for Multi section digital axle counter (MSDAC) as per RDSO/SPN/176/2005 Make Eldyne electro System Pvt. Ltd. (Inspection Agency RDSO) | Numbers | 4.00 | 25,788.16 | 1,03,152.64 |
| 12 | Supply of Analog card (AzLM) for Eldyne make Multi section digital Axle counter (MSDAC) as per RDSO/SPN/176/2013 or latest (Inspection Agency RDSO) | Numbers | 2.00 | 1,62,103.71 | 3,24,207.42 |
| 13 | Motherboard for MSDAC part no. 3CRo1838AAAA make Eldyne(Inspection Agency RDSO) | Numbers | 5.00 | 50,265.01 | 2,51,325.05 |
| 14 | Track side Electronic Unit (EAK) for MSDAC as perRDSO Spec No.:RDSO/SPN/176/2013 Ver.- 3Make:ELDYNE only.(Inspection Agency RDSO) | Numbers | 3.00 | 3,53,564.43 | 10,60,693.29 |
| 15 | Supply of STEU card suitable for MSDAC Siemens make. FIRMS OFFER MAKE / BRAND- SIEMENS(Inspection Agency RDSO) | Numbers | 2.00 | 89,008.73 | 1,78,017.46 |
| 16 | "Block Input Output card (BLEA Card) for Siemens make MSDAC as per RDSO specification no.(Inspection Agency RDSO) RDSO/SPN/176/2013 Ver. 3.(Inspection Agency RDSO)" | Numbers | 2.00 | 1,85,947.55 | 3,71,895.1 |
| 17 | SIRIUS CARD for Multi Section Digital Axle Counter Siemens make RDSO specification No.RDSO/SPN/176/2013 Ver.3 or latest Make/Brand: SIEMENS(Inspection Agency RDSO) | Numbers | 1.00 | 1,74,336.53 | 1,74,336.53 |
| 18 | Processing and monitoring board (VAU CARD) for Siemens make Multi Section Digital Axle Counter as per RDSO specification No. RDSO/SPN/176/2013 ver.3.(Inspection Agency RDSO) | Numbers | 2.00 | 1,66,477.25 | 3,32,954.5 |
| 19 | Supply of counting head ZP 43 V complete with sensor for Siemens make MSDAC(Inspection Agency RDSO) | Numbers | 2.00 | 3,74,469.93 | 7,48,939.86 |
| 20 | Set of SK 30H double rail contact with 5.5 meter Cable for Multisection Digital Axle Counter, ( MSDAC) as per RDSO Spec. No. RDSO/SPN/176/2013 Make/ Eldyne Electro- systems Pvt Ltd. Version 3(Inspection Agency RDSO) | Numbers | 2.00 | 2,31,055.8 | 4,62,111.6 |
| 21 | SK 30H double rail contact with 8 meter cable for Eldyne make Multi/Single section Digital axle counter as per RDSO specification no.RDSO/SPN/176/2013 ver.3 or latest and manufacturer specification. Make Eldyne electro systems Pvt.Ltd. (One no.packet contains the 02 no.TX and 02 nos RX Coils for rail connection sufficient for 1 DP including all accessories)(Inspection Agency RDSO) | Numbers | 1.00 | 1,91,752.12 | 1,91,752.12 |
| 22 | Supply of AC & DC low current clampmeter with range 1 mA to 100 A or higher make FLUKE, RISHABH, or KOICO(Inspection Agency Consignee) | Numbers | 10.00 | 34,567.09 | 3,45,670.9 |
| 23 | Supply of Smoke detector (Optical) Apollo,Agni,Series65 make or similar for fire alarm system.(Inspection Agency Consignee) | Numbers | 20.00 | 4,395.88 | 87,917.6 |
| 24 | "Supply of octagonal booms 32 feet long suitable to HEIDZ make EOLB without hand generator as per RDSO SPEN no: RDSO/SPN/208/2012 with latest amendments. One boom have four pieces of 8 ft long(Inspection Agency Consignee)" | Numbers | 10.00 | 8,406 | 84,060 |
| 25 | "Metravi 4 digit LCD display Auto ranging Digital Earth Resistance Meter Brand: Metravi (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687740175436 dt.01/10/2025)(Inspection Agency Consignee)" | Numbers | 5.00 | 19,825 | 99,125 |
| 26 | "Sanwa Model No. HG561H 7 range Low Voltage Insulation Tester with preset voltages of 15/25/50/100/125/250/500V. Auto AC/DC V selection and Continuity measurement function,. LED Level Meter for MOhms. IP30.OR SIMILAR (Inspection Agency Consignee)" | Numbers | 5.00 | 29,382 | 1,46,910 |
| 27 | Casting of cement concrete to protectS&T equipments and laid cables, abovepipes etc by concrete mixture ofcement, sand, stone in the ratio of1:2:4 using 25 mm graded stoneaggregate as per instruction of site incharge of railways. Concrete is to becasted with the help of suitable sizeshuttering form as per siterequirement. Concrete is to be cured forsufficient time as per standard practiceson railways(Inspection Agency Consignee) | cum | 50.00 | 4,423.45 | 2,21,172.5 |
| 28 | Industrial locker (Pigeon hold box) 12 Compartments. Made out of 18/19 gauge CR sheet with individual locking arrangement (1) size of locker 36 in Width) x 19 in (depth) x 6 foot (Height) (2) with 2 legs of each size 5 inch (H) x 3 inch (W) x 19 inch (D) (3) Size of each compartment 10.74 in (H) x 16.25 in (W) x 19 in (D) 2 in rows and 6 in columns with Siemens gray colour make.(Inspection Agency Consignee) | Numbers | 5.00 | 27,376 | 1,36,880 |
| 29 | "Rechargeable LED head light with hand sensor, 500 Lumen power integrated with 3W COD flood light with 3.7V, 1000MAH lithium battery, Impact proof ABS, Black woven head band. Make: Groz , Model : LED/225 or Equivalent in Make : Fenix or Ledlenser or Olight or Petzl only Make/Brand:GROZ Firm's accepted offer-Accepted Make: Head Lamp Dual Mode and Hand Sensor, Model No.- LED- 225. Warranty: For Light warranty will be 12 Months from the date of delivery, and for Battery warranty will be 06 Months from the date of delivery. ,make/model-Groz, (Warranty Period : Upto 30 months from the date of delivery.)(Inspection Agency Consignee)" | Numbers | 25.00 | 2,730.7 | 68,267.5 |
| 30 | Provision of covering of open areawith PPGI sheet (and sometransparent sheet also for betterlighting) of thickness 0.5 mm at theheight of 15 feet above the groundlevel with proper drain directingoutside the campus. Requiredsupporting steel structures & fixuresmust be provided by the contractor. (Inspection Agency-Consignee) (UNITNUMBER SHOULD BE READ AS PERSQ FEET(Inspection Agency Consignee) | Numbers | 2000.00 | 235.53 | 4,71,060 |
| 31 | Supply of in-built GNSS basedcable route tracer with 10W, 500mA, 85V transmitter suitable fordetecting & mapping undergroundcables with accuracy which canup to 3-5 cm or better, withcurrent direction up/down arrows,Remote calibration check feature.Supply shall include inbuilt RTKenabled receiver, transmitter,compatible dual Bluetoothandroid phone with RTK mobileapplication pre-installed inandroid device along withminimum 5 years subscription,compatible with NTRIP andRTCMv3.X messaging standardsand holder & standardaccessories. Make/Model: Radiodetection RD8200GS or similar." (Inspection Agency RITES) | Numbers | 1.00 | 11,75,844.67 | 11,75,844.67 |
| 32 | Rechargeable Handheld Telecom TDR Cable Fault Locator ST-25 STANLEY OR SIMILAR (Inspection Agency Consignee) | Numbers | 1.00 | 93,322.9 | 93,322.9 |
| 33 | " External DP Band Pass Filter Card suitable for MSDAC Siemens make.Make: SIEMENS(Inspection Agency RDSO)" | Numbers | 2.00 | 1,18,942.79 | 2,37,885.58 |
| 34 | Broad Band Transformer suitable for MSDAC Siemens Make.(Inspection Agency RDSO) | Numbers | 2.00 | 1,05,797.31 | 2,11,594.62 |
| 35 | Supply of Station master room cards (SMR) suitable for MSDAC Siemens.(Inspection Agency RDSO) | Numbers | 5.00 | 12,236.6 | 61,183 |
| 36 | Supply of Station master key (SMK) suitable for MSDAC Siemens .(Inspection Agency RDSO) | Numbers | 5.00 | 7,681.8 | 38,409 |
| 37 | ACR card for Siemens make MSDAC. (Inspection Agency RDSO) | Numbers | 5.00 | 7,150.8 | 35,754 |
| 38 | Digital Axle Counter spares Supply of MSDAC Spares - Siemens Make Scalance Switch(Inspection Agency RDSO) | Numbers | 2.00 | 36,532.8 | 73,065.6 |
| 39 | Supply of MSDAC Spares- Siemens Make Process Connector.(Inspection Agency RDSO) | Numbers | 2.00 | 15,900.5 | 31,801 |
| 40 | Supply of counting head ZP D 43 complete with sensor for Siemens make MSDAC(Inspection Agency RDSO) | Numbers | 2.00 | 4,02,794.65 | 8,05,589.3 |
| 41 | Wheel detection sensor with 10 meter cable for Siemens MSDAC(Inspection Agency RDSO) | Numbers | 3.00 | 1,98,348.78 | 5,95,046.34 |
| 42 | 40V Cordless impact Wrench 3/4 (19mm) with eight types of sockets(Inspection Agency RDSO) | Numbers | 1.00 | 1,42,296.2 | 1,42,296.2 |
| 43 | 40 V Cordless Dust Blower(Inspection Agency RDSO) | Numbers | 2.00 | 4,65,047.44 | 9,30,094.88 |
| 44 | Twist Adaptor 19mm weldon for 13 mm (part no. 210245FS(Inspection Agency Consignee) | Numbers | 16.00 | 873.81 | 13,981.02 |
| 45 | Twist adaptor 19 mm Weldon for 7.2 mm (Part No: 210253FS)(Inspection Agency Consignee) | Numbers | 20.00 | 613.6 | 12,272 |
| 46 | Twisted Drill size 13 x 19 mm (Part no. 5223118)(Inspection Agency Consignee) | Numbers | 20.00 | 2,570.04 | 51,400.8 |
| 47 | Battrey oprated drill m/c cutter 22.5 mm Rail TCT Cutter 22.5x 55 mm (Part No: 240289) (Inspection Agency Consignee) | Numbers | 20.00 | 3,983.56 | 79,671.24 |
| 48 | Hiring of JCB/Hitachifor levelling anddressingground/dismantlingstructures ,Removalof jungle, clearing ofearth, lowering highcess etc., along sidethe track between upand down linesobstructing drainagesof rain water, clearingof bushes obstructingvisibility at curvesand Level Crossingswith all lead and liftetc. complete and asdirected by theEngineer-in-charge.All labour, tools andplants consumablesstores includingsupply of JCB/Hitachiwith crew to beprovided by thecontractor at his owncost. The contractorshall arrange roadpermit for vehicle forall the States ofoperation, as perinstructions ofengineer in-chargeand vehicle shall notbe more than threeyears old. Paymentshall be made foractual working hoursat site.(Inspection Agency Consignee) | Hour | 50.00 | 1,113.64 | 55,682 |
| 49 | Battery operated High performance LED area with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Max light output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220-240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost mak Eibenstock/Milwaukee or equivalent. (Inspection Agency Consignee) | Numbers | 2.00 | 60,279.74 | 1,20,559.48 |
| 50 | "Printing & Supply of various Signal maintenance register paper size A-4, Thickness 70 GSM Minimum, 'A' Grade white paper 9 X 11"" size Both size printing Black colour with hard bound with top cover color printing having label, name, number of register etc.. Register would be contained total 200 Nos of pages on average. Register names, Format details are attached as annexure-A IN NIT (UNITNUMBER SHOULD BE READAS PER REGSITER) (Inspection Agency Consignee)" | Numbers | 480.00 | 142.38 | 68,342.4 |
| 51 | High speed steel twist drill bit dia 7mm/13 mm suitable for battery operated drill machine make Eibenstok. Drill bit make: MAKITA/BOSCH/FEIN or Other reputed brand(Inspection Agency Consignee) | Numbers | 100.00 | 378.96 | 37,896 |
| 52 | MODEM SUITABLE FOR SIEMENS MAKE MSDAC SYSTEM TO WORK ON E1 & QUAD WITH AUTOMATIC BUMPLESS CHANGEOVER) Make- Efftronics,Siemens(Inspection Agency Consignee) | Numbers | 2.00 | 1,00,909.3 | 2,01,818.6 |
| Schedule total | ₹1,38,60,036.03 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf GCC CORRECTION SLIP NO 1 TO 11
ATTACHMENT
PRINTINGANNEXURE3filesmerged1.pdf
ATTACHMENT
FINALNEWTENDERDOC202650_1.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .