GE/863/EWS-T-43 OF 2021-22

Amount

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded ,1100 volts grade, copper conductor cable, unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc, all as speified for one light point / fan/ Bell point controlled by one switch complete all as specified and directed.

All as per Srl item No 2 here-in-before but controlled with one 3 pin socket outlet 5 Amp on independent board with other switches with cable 1.5 Sqmm.

All as per Srl item No 2 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm.

All as per Srl item No 2 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cables 2.5 Sqmm .

Supply and fixing switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed .

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing in replacement of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing in replacement of switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

S&F in replacement of LED integrated batten tube light fittings 20W with polycarbonate housing and integrated electronic driver complete with twin core twisted flexible copper conductor cable complete all as specfied and directed.

Supply and fixing in replacement of LED light fitting mirror type 2ft of 10W 6500 K , with high grade diffuser for better optical control complete all as specified and directed. Make : Crompton Model : Light Linea or equivalent of makes as per Appx 'B' as approved.

Supply and fixing in replacement of Bajaj LED Bulk head light fittings, 10 Watt, cool white, color temperature 5700K wall mounting complete all as specified and directed.

Supply and fixing in replacement of slim LED Panel lightdown light of capacity 18W of size 225 x 225 mm square type complete all as specifed and directed.

Supply and fixing in replacement of slim LED Panel light down light of capacity 6W of size dia 120mm, round type WH (6500K) complete all as specifed and directed.

S & F in replacement of LED Polycarbonate T8 ,20 watt, LED tube with in built driver with metal heat sink double side connection complete all as specified and directed. Make: Crompton , Model -ULTRON, Model No - LT8-20-865-(2) or equivalent of makes as per Appx 'B' as approved.

S&F Bell push flush type 5/6 Amps complete all as specified and directed.

S&F Bell AC 230 volt single pole complete all as specified and directed.

S &F Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

S & F lamp holder, PVC/ Polycarbonte type with back plate suitable for batten/pendant fittings complete all as specified and directed.

S&F in replacement of Bell push flush type 5/6 Amps complete all as specified and directed.

S&F in replacement of Bell AC 230 volt single pole complete all as specified and directed.

S &F in replacement of Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

S & F in replacement of lamp holder, PVC/ Polycarbonte type with back plate suitable for batten/pendant fittings complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door for DBs, single pole and neutral , 8 way, 240 volt complete all as specified and directed .

All as per item No. 28 here-in-before but 4 way.

All as per item No. 28 here-in-before but 2 way.

S&F in replacement of MCB SPN 40 Amp, 'B' series, rupturing cap 10 KA, complete all as specified and directed .

S&F in replacement of MCB SP, 6 Amp to 32 Amp, 240 Volts , 10 KA complete all as specified and directed .

S & F in replacement of Sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp , 10 KA complete all as specified and directed .

S & F in replacement of submain wiring with FRLS PVC insulated single core multistranded copper conductor cable 1100 Volts grade, 6 Sqmm, 2 runs and one run 4 sqmm as earth wire all drawn through & incl in PVC casing caping of suitable size, medium grade complete all as specified and directed .

M&L for Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire, including taking out old/ unserviciale earthing complete all as specified and directed.

M & L earthing complete with galvanished steel earth plate electrode size 600x600x6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to and including GI earth earth strip 32 x 6 mm by means of bolts nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR Part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:2:4) type B-1using 20 mm graded stone aggregate in earthing chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore light grade upto 7.5 mtr long, etc including taking out old/ unserviciale earthing complete all as specified and directed.

M&L for opening the fan motor of exhaust fan of size upto 300 mm, dismantling old burnt winding and then rewinding with super enamaled copper winding wire of appropriate size incl varnishing and baking and then assembling complete and testing and refixing at the existing site complete all as specified and directed.

M&L for opening the fan motor of exhaust fan of size upto 450 mm, dismantling old burnt winding and then rewinding with super enamaled copper winding wire of appropriate size incl varnishing and baking and then assembling complete and testing and refixing at the existing site all as directed.

Supply and fixing in replacement of exhaust fan, steel body, heavy duty, AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers complete including connection upto the ceiling rose. Note : Old exhaust fan shall be deposited in MES store.

Supply and fixing in replacement PVC fresh air fan/exhaust fan, 300 mm sweep 230 V AC single phase including connection upto the ceiling rose complete all as specified and directed. Make : Bajaj Model :- Maxima 300 mm or equivalent of makes as per Appx 'B' as approved.

S&F in replacement thermostat suitable for 25/50 ltrs capacity Geyser complete all as specified and directed.

S&F in replacement multifunction safety device (pressure release valve) suitable for 25/50 ltrs capacity Geyser complete all as specified and directed.

S & F in replacement heating element, triangular type, 1500 watt suitable for 25 ltr capacity geyser complete all as specified and directed.

S & F in replacement heating element, triangular type, 2000 watt suitable for 50 ltr capacity geyser complete all as specified and directed.

S & F in replacement heating element circular type 1500 watt suitable for 50 ltr capacity geyser complete all as specified and directed.

S & F in replacement of Indicating lamp red/ green colour complete all as specified and directed.

S&F in replacement PVC connection pipe, 15 mm , 450 mm long with CP nuts and washers suitable for hot water for geyser complete all as specified

Supply and fixing in repacement 1100 volts grade, heavy duty , cable ,PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm dia suspension wire, one twin core cable flat or circular of size 10 Sqmm stranded conductor complete all as specified & directed.

Supply and fixing in repacement LED Lamp 09 watt Base B22 complete all as specified & directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 38904.00

GULATI BUILDERS