NIT No GE/ND-33/2025-26

Amount

B&R PORTION: Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved on plan exceeding 6m means radius in CM 1:6 with old size bricks complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc complete all as specified and directed.

Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil complete all as specified and directed.

M&L for Cement concrete in foundations,filling and mass concreteType D2 1:3:6 (40 mm graded coarse agg) complete all as specified and directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde E-250) quality-A complete all as specified and directed.

M&L for Steel work in tubular trusses, post round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confrming IS 1161-1979 grade St.-240, complete all as specified and directed.

M&L for fabricating, assembling and erection of Tensile Mesh Membrane with Multi- composed PVDF- lacquer system on both sides, wieldable without grinding , HT polyester yarns 2200 Dtex, minimum weight should be 1050g/sqm (EN ISO 2286-2), minimum tensile strength should be 6000 N/ 5cm in warp and 5500 N/5cm in weft directions (EN ISO 1421), minimum Tear strength should be 1800 N in warp and 1800 N in weft (DIN 53363). Flame Retradency DIN 4102: B1, Quality in conformity with ISO 9001 with minimum 10 years' warranty from the manufacturer. over steel frames with all fittings and fixtures such as Galvanized MS Membrane/ End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, keder rods & galvanized MS strands/ cables with stainless steel end terminals complete as per Drawing/ Detail & as per specifications and as per the instructions of Engineer-in-charge. (Rate includes cost of fabric, shop drawings, forming, cutting, fabrication, hot weld stich of fabric, Transport to the site, assembling and installation with GI cables, hardware, Aluminum flat, EPDM gasket and required accessories wherever required complete including lifts up to all heights, tools and plants, and necessary scaffolding etc. required for all operations in all respect complete all as specified and directed. Note: Supporting steel frame shall be paid separately under structural steel item. (Note: Actual surface area of fabric shall only be measured for payment.)

M&L for Granite (of any type) 20 mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps risers, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specifeid and directed.

M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed.

M&L for preparation of new steel surfaces and Applying two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.

E&M PORTION: Supply, installation, testing and commissioning of Batteries 12 volt, 42 AH for UPS containing 2 years warranty, Eco friendly, low self discharge, better conductivity, free from corrosion, Abs container with Lid, superior high rate discharge, rass terminal with lead coating, excellent charge retention and recovering ability, dry charged, suitable for UPS complete alongwith nut, bolt, washer, thimble, copper cable and other connected accessories complete all as specified and directed. Make: Exide/ Luminous/ Amaron

Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 2.0 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/ overload protection, electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with atleast 3 star or above BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ DAIKIN

Supply, installation, testing and commissioning of Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, suitable compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection, electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with at least 5 star BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ DAIKIN

Supply & fixing of interconnecting copper refrigerant pipe work duly insulated with elastomeric nitrile rubber type tubular insulation and interconnecting copper conductor PVC insulated cable as per OEM specs between indoor & outdoor units as per Size: 5/8" and 3/8" complete all as specified and directed.

Supply & Fixing of PVC drain pipe compete with fittings, supports as per specification Size: 25 MM Diameter complete all as specified and directed.

Supply and fixing of powder coated MS sheet metal stands for mounting outdoor condensing unit complete all as specified and directed.

Supply and fixing of GI Cable Tray with cover & accessories, beends etc. size: 40 MM x 200 MM x 40 mm complete all as specified and directed.

M&L for submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg medium grade rigid non-metallic PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

Supply and fixing modular PVC plastic base plug and socket complete with modular MCB SP 16 Amp 230 volts complete all as specified and directed. Make: Havells Cat Part No DHDMCSN0251016 or equivalent of make as specified in PS. Note: (a) Srl Item No 03.00, 07.00, 08.00 to 12.00, 14.00 & 17.00 to 20.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

Ex Serviceman Enterprises (BID ID -3381012)

Tanveer Associates (BID ID -3380941)

BEHAL TRADERS (BID ID -3380161)

MRITUNJYA ASSOCIATES (BID ID -3381019)

B S R Enterprises (BID ID -3379351)

M/S Sunil Steel Works (BID ID -3380942)