NIT No-25 EE (EM) M-I/ (23-24) Item no. 13

Dismantling of existing pump, motor from the base frame by cutting of rusted M.S nut bolts and foundation bolts by gas cutter set and electric welding machine, removing all the nut bolt and worm out M.S Base frame from the RCC foundation suction and delivery side by gas cutter set and electric welding set job also includes dismantling the suction & delivery side sluice valve, NRV,taper bend etc. as per side requirement and lifting of pump and motor on safe place. Breaking of RCC foundation by pneumatic power hammer chisel and electric compressor machine etc. the job includes removing the broken material from P/H and disposing the same at suitable place.

Supply of sewage/solid Handling non clog pump for sewage water applications having minimum discharge 375 m3/ hr, minimum head 12 meter with SS impeller& neck ring, SS 410 Shaft & SS sleeve, CI body, Pump suction/delivery size 150mmx150 mm. Make:- KBL/M&P/Jyoti/WPIL.

Supply of 25 HP, 3 phase AC, 1450 rpm TEFC squirrel cage induction motor. Make- KEC/Crompton/ABB/Jyoti.

Supply of coupling and coupling guard for pump and motor.

Supply of MS base frame suitable for pump and motor.

Supply of M.S pipe of all size as per site requirement.

Supply of M.S Specials of all size as per site requirement.

Providing and fixing bolts including nuts and washers complete.

Making of drainage system of waste water of pump by providing and fixing of suitable size of GI pipe 25,40,50 MM with all fittings MS clamps bends,union and threading at site, civil work etc for all as required.

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armored 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 4CX50 Sq mm.Make:-Havells/Gloster/Granday/ DJB approved make.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 4CX50 Sqmm. (clamped with 25x3mm MS flat clamp)

Supply of rubber packing sheet. Make: Jyoti/national/any DJB approved.

Supply of NRV of size 150 mm IS: 5312 part 1 PN 1.0 Make - Kirloskar / IVC.

Supply of Non-Rising Sluice valve of size 200 mm, IS: 14846 PN 1.0 Make - Kirloskar / IVC.

Supply of Non-Rising Sluice valve of size 150 mm, IS: 14846 PN 1.0 Make - Kirloskar / IVC.

Making of RCC foundation of size 1750 mm X 750mm by 1:2:4 concrete for M.S. base including providing fixing of 6 nos. foundation bolt of size 300mm long.

Loading, unloading and Transportation charges for man & material etc complete in all respect.

Cleaning of sewage sump, suction line with the help of manual labour with all tools and tackles complete as required. Painting with synthetic enamel paint complete as required.

Arrangements of all safety equipments like oxygen cylinder, safety belt, gum boots, ladder etc as required as per direction of engineer incharge.

Fixing of new M.S. base frame made of M.S. channel heavy duty of size 100 mm x 50 mm complete with Fixing the M.S. base frame on the RCC foundation the job includes proper leveling and alignment,renovation of two old pumps. Installation of the pump set as per original position with proper alignment and also making of all electrical connections, fitting all valves, bends etc. in original position as required.

Testing / commissioning of the pump set on NO load & full load after making of all connections.

Raj Engineering Co.

Devraj Enterprises

Super System Engineers

HYDROCON ENGINEERS

Gupta Brothers

M G Traders and Engineers