Supplying and Fixing of Street Light with necessary UG Cable at 19 KM Pump House Little Andaman

Amount

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. a) Above 4.5 metre and upto 6.5 metre

Supplying Installation testing commissioning of 45 W LED Street light Luminaire Powder coated pressure die cast Aluminium SMD LED Street light with heat resistant toughened glass IP 65 protection as equivalent to C&S INDUS/45W Ordering No.LTESS45WLED/LS or its equivalent.

Fabrication and supplying of street light pole made up of 65mm dia 'B' class ISI mark G.I. Pipe 6 mtr long with earth stud and necessary G.I reducer/coupling fixed with street light bracket made up of 40 mm dia 1.2 mtr long 'B' class G.I. pipe ISI marked including bending the pipe to the required shape including SMC box of size 250 x 200 x100 mm thick hinged door and locking arrangement properly mounted on 40 x 6 mm MS flat welded on the pole with DIN channel, 6 A MCB SP and 63 A rating modular 4 way connector and 300 x 300 x 6 mm thick M.S. Base plate welded at the bottom i/c painting with one coat of metallic primer and two coats of synthetic enamel paint, as required as per the direction of the Engineer In-charge. (Foundation 70 cm below G/L and 50 cm above G/L).

Supplying of following XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS 7098 (Part-I) and IS No:1554 (Part-I 1988 as applicable Make: Clooster/ Havells/ Polycab/RR Cable etc as reqd. a) 10 sqmm x 3 Core

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS 14930 Part -I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly in ground at the depth of 50 cm in the existing cable trench etc as reqd. a) 50/38mm

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS 14930 Part -I complete with necessary HDPE fitting for protection of 1.1 KV grade underground cable directly on the Surface or Wall etc as reqd. a) 50/38mm

Supplying Installation testing and commissioning of 20W LED POST TOP LANTERN Luminaire with diffuser and painted spun aluminium deflector IP 65 protection as equivalent to CETUS/20W Ordering No. LTGLM20WHPLED/W or its equivalent.

M/s Sai Electrical Works

M/s G K Construction