REPAIR/MAINTENANCE TO CONTACTORS, STARTER, MCCB, PUMP SETS , LT PANEL BOARDS AND CONNECTED ITEMS AT G/B PH, MITHUN TREATED WATER PH, CPH, ANPH, JD AND DHANUSH PUMP HOUSE AREA UNDER GE (NW) NAVYNAGAR, COLABA MUMBAI

Supply, installation, testing and commissioning in replacement of LT Panel board indoor type from CPRI approved panel manufacturer made out of 2mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire,50 HZ , 415 Volt AC supply with 600A capacity copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc suitable Cable alley with for provn of cable entries at bottom with cable glands including the following :- (a) MCCB 4 pole, 415V,400Amps 50 KA - 02 No (incoming) thermo magnetic adjustable release type,ICS=ICU=100% (b) MCCB 4 pole,415V,250 Amps, 36 KA - 04 Nos (outgoing) thermo magnetic adjustable release type,ICS=ICU=100% ( c) Change over switch front open hand operated 400 Amp - 1 No. (d) Automatic star/Delta starters panel with all accessories mounting suitable for 75 HP-02 Nos.and 40 HP-02 Nos (e) Phase indicating lamps(RYB)-04 set (f) Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96X96mm-04 set. (g) Suitable CTs for main and for 04 starter panels. Note: before fabrication of panel, the contractor has to take approval from accepting officer on drawing.

Supply, installation, testing and commissioning in replacement of LT Panel board from CPRI approved panel manufacturer made out of of 2mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire,50 HZ , 415 Volt AC supply with 800A capacity copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc suitable Cable alley with for provn of cable entries at bottom with cable glands including the following :- (a) MCCB 4 pole, 415V,630Amps 50 KA - 01 No (incoming) thermo magnetic adjustable release type,ICS=ICU=100% (b) MCCB 4 pole,415V, 630 Amps, 36 KA - 01 Nos (outgoing) thermo magnetic adjustable release type,ICS=ICU=100% ( c) MCCB 4 pole,415V, 100 Amps, 36 KA - 01 Nos (outgoing) thermo magnetic adjustable release type,ICS=ICU=100% (d) MCCB 4 pole,415V, 63 Amps, 25 KA - 01 Nos (outgoing) thermo magnetic adjustable release type,ICS=ICU=100% (e) Phase indicating lamps(RYB)-04 set (f) Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96X96mm-04 set. (g) Suitable CTs for main and for 04 starter panels. Note: before fabrication of panel, the contractor has to take approval from accepting officer on drawing.

Supply, installation, testing and commissioning in replacement of automatic mains failure (AMF) panel,indoor type floor mounted, free standing, CPRI approved panel manufacturer made out of of 2 mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire, 50 HZ , 415 Volt AC supply with 600A capacity copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc suitable Cable alley with for provn of cable entries at bottom with cable glands including the following :- (a) MCCB 4 pole, 415V, 300 Amps 36 KA - 04 No (1 motor main + 1 DG + 2 for outgoing) thermo magnetic adjustable release type,ICS=ICU=100% (b) Contactor rating 300 Amps, 4 pole,415V - 02 Nos (c) AMF Controller - 01 Nos (d) Digital Mulfunctioning meter - 01 Nos (e) Battery Charger-01 Nos (f) Control relays - 05 Nos (g) Auto manual selector switch - 01 Nos (h) Control MCB 16A SPN - 02 Nos and 16A 4P - 01 Nos (e) Phase indicating lamps(RYB)-03 set (f) Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96X96mm-04 set. (g) Suitable CTs for main and for 04 starter panels. Note: before fabrication of panel, the contractor has to take approval from accepting officer on drawing.

Supply, installation, testing and commissioning in replacement of LT Panel board indoor type from CPRI approved panel manufacturer made out of 3.15 mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire,50 HZ , 415 Volt AC supply with 800A capacity copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc suitable Cable alley with for provn of cable entries at bottom with cable glands including the following :- (a) MCCB 4 pole, 415V,630Amps 50 KA - 02 Nos (incoming) thermo magnetic adjustable release type,ICS=ICU=100% (b) On load change over switch 630 Amps, 4 pole, 415 volts-01 No. (c) MCCB 4 pole, 415V,400Amps 50 KA - 03 Nos (Out going) thermo magnetic adjustable release type,ICS=ICU=100% (d) Phase indicating lamps(RYB)-04 set (e) Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96X96mm-01 set.

M& L for Disconnecting centrifugal pump from motor, suction and delivery pipe line of any Make, model and taking down packing for removing and insertion of new shaft sleeves or remove Bearing using bearing puller gear and fix new all two bearings and greasing all parts, coupling pump to motor and check for proper shaft alignments such that no vibration produce during opertion of following capacity pumps, complete all as specfied and as directed by Engineer-in-charge. (a) Bearings suitable for Pump coupled with 150 HP motor Make:SFC/NBC/SKF

Bearings suitable for Pump coupled with 120 HP motor .

Bearings suitable for Pump coupled with 100 HP motor .

Bearings suitable for Pump coupled with 75 HP motor .

Bearings suitable for Pump coupled with 60 HP motor .

Bearings suitable for Pump coupled with 50 HP motor .